Starting Zabbix Agent [ip-XXX-XX-XX-XX]. Zabbix 3.2.3 (revision 64610).
**** Enabled features ****
IPv6 support: NO
TLS support: NO
**************************
using configuration file: /usr/local/etc/zabbix_agentd.conf
agent #0 started [main process]
agent #4 started [listener #3]
agent #1 started [collector]
agent #3 started [listener #2]
agent #2 started [listener #1]
Got signal [signal:15(SIGTERM),sender_pid:10271,sender_uid:0,reason:0]. Exiting …
Got signal [signal:15(SIGTERM),sender_pid:10271,sender_uid:0,reason:0]. Exiting …
Got signal [signal:15(SIGTERM),sender_pid:10271,sender_uid:0,reason:0]. Exiting …
One child process died (PID:9908,exitcode/signal:1). Exiting …
Got signal [signal:15(SIGTERM),sender_pid:10271,sender_uid:0,reason:0]. Exiting …
Zabbix Agent stopped. Zabbix 3.2.3 (revision 64610).
**Detailed Zabbix log with Log Level 4:-**
Starting Zabbix Agent [ip-xxx.xx.xx.xx]. Zabbix 3.2.3 (revision 64610).
**** Enabled features ****
IPv6 support: NO
TLS support: NO
**************************
using configuration file: /usr/local/etc/zabbix_agent d.conf
In zbx_load_modules()
End of zbx_load_modules():SUCCEED
In init_collector_data()
In zbx_dshm_create() proj_id:112 size:0
End of zbx_dshm_create():SUCCEED shmid:-1
End of init_collector_data()
agent #0 started [main process]
agent #1 started [collector]
agent #3 started [listener #2]
__zbx_zbx_setproctitle() title:'listener #2 [waiting for connection]'
agent #2 started [listener #1]
In init_cpu_collector()
__zbx_zbx_setproctitle() title:'listener #1 [waiting for connection]'
End of init_cpu_collector():SUCCEED
__zbx_zbx_setproctitle() title:'collector [processing data]'
In update_cpustats()
End of update_cpustats()
__zbx_zbx_setproctitle() title:'collector [idle 1 sec ]'
agent #4 started [listener #3]
__zbx_zbx_setproctitle() title:'listener #3 [waiting for connection]'
__zbx_zbx_setproctitle() title:'collector [processing data]'
In update_cpustats()
End of update_cpustats()
__zbx_zbx_setproctitle() title:'collector [idle 1 sec ]'
__zbx_zbx_setproctitle() title:'collector [processing data]'
In update_cpustats()
End of update_cpustats()
__zbx_zbx_setproctitle() title:'collector [idle 1 sec ]'
__zbx_zbx_setproctitle() title:'collector [processing data]'
In update_cpustats()
End of update_cpustats()
__zbx_zbx_setproctitle() title:'collector [idle 1 sec ]'
Got signal [signal:15(SIGTERM),sender_pid:10231,sende r_uid:0,reason:0]. Exiting ...
zbx_on_exit() called
Got signal [signal:15(SIGTERM),sender_pid:10231,sende r_uid:0,reason:0]. Exiting ...
Got signal [signal:15(SIGTERM),sender_pid:10231,sende r_uid:0,reason:0]. Exiting ...
Got signal [signal:15(SIGTERM),sender_pid:10231,sende r_uid:0,reason:0]. Exiting ...
Got signal [signal:15(SIGTERM),sender_pid:10231,sende r_uid:0,reason:0]. Exiting ...
In zbx_dshm_destroy() shmid:-1
End of zbx_dshm_destroy():SUCCEED
In zbx_unload_modules()
End of zbx_unload_modules()
Zabbix Agent stopped. Zabbix 3.2.3 (revision 64610).
Chef Logs
Synchronizing Cookbooks:
- s3_file (2.5.1)
- zabbix (0.1.1)
Installing Cookbook Gems:
Compiling Cookbooks...
Converging 7 resources
Recipe: zabbix::aml
* yum_package[gcc] action install (up to date)
* remote_file[/home/zabbix-3.2.3.tar.gz] action create
- create new file /home/zabbix-3.2.3.tar.gz
- update content in file /home/zabbix-3.2.3.tar.gz from none to e6dba7
(file sizes exceed 10000000 bytes, diff output suppressed)
- change mode from '' to '0755'
- change owner from '' to 'root'
- change group from '' to 'root'
* bash[agent-install] action run
- execute "bash" "/tmp/chef-script20170125-2651-klp1so"
* directory[/etc/zabbix] action create
- create new directory /etc/zabbix
- change mode from '' to '0755'
- change owner from '' to 'zabbix'
- change group from '' to 'zabbix'
* template[/usr/local/etc/zabbix_agentd.conf] action create
- update content in file /usr/local/etc/zabbix_agentd.conf from 2fefc4 to 10bb5e
--- /usr/local/etc/zabbix_agentd.conf 2017-01-25 00:41:40.469538172 +0000
+++ /usr/local/etc/.chef-zabbix_agentd20170125-2651-1p0i3vw.conf 2017-01-25 00:41:50.917553880 +0000
@@ -1,77 +1,78 @@
+
# This is a configuration file for Zabbix agent daemon (Unix)
# To get more information about Zabbix, visit http://www.zabbix.com
### Option: PidFile
-# Name of PID file.
+# Name of PID file.
#
# Mandatory: no
# Default:
-# PidFile=/tmp/zabbix_agentd.pid
+PidFile=/etc/zabbix/zabbix_agentd.pid
### Option: LogType
-# Specifies where log messages are written to:
-# system - syslog
-# file - file specified with LogFile parameter
-# console - standard output
+# Specifies where log messages are written to:
+# system - syslog
+# file - file specified with LogFile parameter
+# console - standard output
#
# Mandatory: no
# Default:
# LogType=file
### Option: LogFile
-# Log file name for LogType 'file' parameter.
+# Log file name for LogType 'file' parameter.
#
# Mandatory: no
# Default:
# LogFile=
-LogFile=/tmp/zabbix_agentd.log
+LogFile=/etc/zabbix/zabbix_agentd.log
### Option: LogFileSize
-# Maximum size of log file in MB.
-# 0 - disable automatic log rotation.
+# Maximum size of log file in MB.
+# 0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
-# LogFileSize=1
+#LogFileSize=1
### Option: DebugLevel
-# Specifies debug level:
-# 0 - basic information about starting and stopping of Zabbix processes
-# 1 - critical information
-# 2 - error information
-# 3 - warnings
-# 4 - for debugging (produces lots of information)
-# 5 - extended debugging (produces even more information)
+# Specifies debug level:
+# 0 - basic information about starting and stopping of Zabbix processes
+# 1 - critical information
+# 2 - error information
+# 3 - warnings
+# 4 - for debugging (produces lots of information)
+# 5 - extended debugging (produces even more information)
#
# Mandatory: no
# Range: 0-5
# Default:
-# DebugLevel=3
+# DebugLevel=4
### Option: SourceIP
-# Source IP address for outgoing connections.
+# Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
# SourceIP=
### Option: EnableRemoteCommands
-# Whether remote commands from Zabbix server are allowed.
-# 0 - not allowed
-# 1 - allowed
+# Whether remote commands from Zabbix server are allowed.
+# 0 - not allowed
+# 1 - allowed
#
# Mandatory: no
# Default:
# EnableRemoteCommands=0
### Option: LogRemoteCommands
-# Enable logging of executed shell commands as warnings.
-# 0 - disabled
-# 1 - enabled
+# Enable logging of executed shell commands as warnings.
+# 0 - disabled
+# 1 - enabled
#
# Mandatory: no
# Default:
@@ -80,35 +81,35 @@
##### Passive checks related
### Option: Server
-# List of comma delimited IP addresses (or hostnames) of Zabbix servers.
-# Incoming connections will be accepted only from the hosts listed here.
-# If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally.
+# List of comma delimited IP addresses (or hostnames) of Zabbix servers.
+# Incoming connections will be accepted only from the hosts listed here.
+# If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally.
#
# Mandatory: no
# Default:
# Server=
-Server=127.0.0.1
+Server=XXX.XXX.XXX.XX
### Option: ListenPort
-# Agent will listen on this port for connections from the server.
+# Agent will listen on this port for connections from the server.
#
# Mandatory: no
# Range: 1024-32767
# Default:
-# ListenPort=10050
+ ListenPort=10050
### Option: ListenIP
-# List of comma delimited IP addresses that the agent should listen on.
-# First IP address is sent to Zabbix server if connecting to it to retrieve list of active checks.
+# List of comma delimited IP addresses that the agent should listen on.
+# First IP address is sent to Zabbix server if connecting to it to retrieve list of active checks.
#
# Mandatory: no
# Default:
# ListenIP=0.0.0.0
### Option: StartAgents
-# Number of pre-forked instances of zabbix_agentd that process passive checks.
-# If set to 0, disables passive checks and the agent will not listen on any TCP port.
+# Number of pre-forked instances of zabbix_agentd that process passive checks.
+# If set to 0, disables passive checks and the agent will not listen on any TCP port.
#
# Mandatory: no
# Range: 0-100
@@ -118,43 +119,43 @@
##### Active checks related
### Option: ServerActive
-# List of comma delimited IP:port (or hostname:port) pairs of Zabbix servers for active checks.
-# If port is not specified, default port is used.
-# IPv6 addresses must be enclosed in square brackets if port for that host is specified.
-# If port is not specified, square brackets for IPv6 addresses are optional.
-# If this parameter is not specified, active checks are disabled.
-# Example: ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1]
+# List of comma delimited IP:port (or hostname:port) pairs of Zabbix servers for active checks.
+# If port is not specified, default port is used.
+# IPv6 addresses must be enclosed in square brackets if port for that host is specified.
+# If port is not specified, square brackets for IPv6 addresses are optional.
+# If this parameter is not specified, active checks are disabled.
+# Example: ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1]
#
# Mandatory: no
# Default:
# ServerActive=
-ServerActive=127.0.0.1
+#ServerActive=127.0.0.1
### Option: Hostname
-# Unique, case sensitive hostname.
-# Required for active checks and must match hostname as configured on the server.
-# Value is acquired from HostnameItem if undefined.
+# Unique, case sensitive hostname.
+# Required for active checks and must match hostname as configured on the server.
+# Value is acquired from HostnameItem if undefined.
#
# Mandatory: no
# Default:
# Hostname=
-Hostname=Zabbix server
+#Hostname=system.hostname
### Option: HostnameItem
-# Item used for generating Hostname if it is undefined. Ignored if Hostname is defined.
-# Does not support UserParameters or aliases.
+# Item used for generating Hostname if it is undefined. Ignored if Hostname is defined.
+# Does not support UserParameters or aliases.
#
# Mandatory: no
# Default:
# HostnameItem=system.hostname
### Option: HostMetadata
-# Optional parameter that defines host metadata.
-# Host metadata is used at host auto-registration process.
-# An agent will issue an error and not start if the value is over limit of 255 characters.
-# If not defined, value will be acquired from HostMetadataItem.
+# Optional parameter that defines host metadata.
+# Host metadata is used at host auto-registration process.
+# An agent will issue an error and not start if the value is over limit of 255 characters.
+# If not defined, value will be acquired from HostMetadataItem.
#
# Mandatory: no
# Range: 0-255 characters
@@ -162,18 +163,18 @@
# HostMetadata=
+# Host metadata is used at host auto-registration process.
+# the value returned by specified item is over limit of 255 characters.
+# This option is only used when HostMetadata is not defined.
#
# Mandatory: no
# Default:
# HostMetadataItem=
### Option: RefreshActiveChecks
+# How often list of active checks is refreshed, in seconds.
#
# Mandatory: no
# Range: 60-3600
@@ -181,7 +182,7 @@
# RefreshActiveChecks=120
### Option: BufferSend
-# Do not keep data longer than N seconds in buffer.
+# Do not keep data longer than N seconds in buffer.
#
# Mandatory: no
# Range: 1-3600
@@ -189,8 +190,8 @@
# BufferSend=5
### Option: BufferSize
-# Maximum number of values in a memory buffer. The agent will send
-# all collected data to Zabbix Server or Proxy if the buffer is full.
+# Maximum number of values in a memory buffer. The agent will send
+# all collected data to Zabbix Server or Proxy if the buffer is full.
#
# Mandatory: no
# Range: 2-65535
@@ -198,10 +199,10 @@
# BufferSize=100
### Option: MaxLinesPerSecond
-# Maximum number of new lines the agent will send per second to Zabbix Server
-# or Proxy processing 'log' and 'logrt' active checks.
-# The provided value will be overridden by the parameter 'maxlines',
-# provided in 'log' or 'logrt' item keys.
+# Maximum number of new lines the agent will send per second to Zabbix Server
+# or Proxy processing 'log' and 'logrt' active checks.
+# The provided value will be overridden by the parameter 'maxlines',
+# provided in 'log' or 'logrt' item keys.
#
# Mandatory: no
# Range: 1-1000
@@ -211,20 +212,20 @@
############ ADVANCED PARAMETERS #################
### Option: Alias
-# Sets an alias for an item key. It can be used to substitute long and complex item key with a smaller and simpler one.
-# Multiple Alias parameters may be present. Multiple parameters with the same Alias key are not allowed.
-# Different Alias keys may reference the same item key.
-# For example, to retrieve the ID of user 'zabbix':
-# Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1]
-# Now shorthand key zabbix.userid may be used to retrieve data.
-# Aliases can be used in HostMetadataItem but not in HostnameItem parameters.
+# Sets an alias for an item key. It can be used to substitute long and complex item key with a smaller and simpler one.
+# Multiple Alias parameters may be present. Multiple parameters with the same Alias key are not allowed.
+# Different Alias keys may reference the same item key.
+# For example, to retrieve the ID of user 'zabbix':
+# Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1]
+# Now shorthand key zabbix.userid may be used to retrieve data.
+# Aliases can be used in HostMetadataItem but not in HostnameItem parameters.
#
# Mandatory: no
# Range:
# Default:
### Option: Timeout
+# Spend no more than Timeout seconds on processing
#
# Mandatory: no
# Range: 1-30
@@ -232,45 +233,45 @@
# Timeout=3
### Option: AllowRoot
-# will try to switch to the user specified by the User configuration option instead.
-# Has no effect if started under a regular user.
-# 0 - do not allow
-# 1 - allow
+# Allow the agent to run as 'root'. If disabled and the agent is started by 'root', the agent
+# will try to switch to the user specified by the User configuration option instead.
+# Has no effect if started under a regular user.
+# 0 - do not allow
+# 1 - allow
# Mandatory: no
# Default:
-# AllowRoot=0
+ AllowRoot=1
### Option: User
# Mandatory: no
# Default:
# User=zabbix
### Option: Include
-# You may include individual files or all files in a directory in the configuration file.
-# Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
+# You may include individual files or all files in a directory in the configuration file.
+# Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
#
# Mandatory: no
# Default:
# Include=
# Include=/usr/local/etc/zabbix_agentd.userparams.conf
-# Include=/usr/local/etc/zabbix_agentd.conf.d/
+ Include=/usr/local/etc/zabbix_agentd.conf.d/
# Include=/usr/local/etc/zabbix_agentd.conf.d/*.conf
####### USER-DEFINED MONITORED PARAMETERS #######
### Option: UnsafeUserParameters
-# Allow all characters to be passed in arguments to user-defined parameters.
-# The following characters are not allowed:
-# \ ' " ` * ? [ ] { } ~ $ ! & ; ( ) < > | # @
-# Additionally, newline characters are not allowed.
-# 0 - do not allow
-# 1 - allow
+# Allow all characters to be passed in arguments to user-defined parameters.
+# The following characters are not allowed:
+# \ ' " ` * ? [ ] { } ~ $ ! & ; ( ) < > | # @
+# Additionally, newline characters are not allowed.
+# 0 - do not allow
+# 1 - allow
#
# Mandatory: no
# Range: 0-1
@@ -278,9 +279,9 @@
# UnsafeUserParameters=0
### Option: UserParameter
-# User-defined parameter to monitor. There can be several user-defined parameters.
-# Format: UserParameter=<key>,<shell command>
-# See 'zabbix_agentd' directory for examples.
+# User-defined parameter to monitor. There can be several user-defined parameters.
+# Format: UserParameter=<key>,<shell command>
+# See 'zabbix_agentd' directory for examples.
#
# Mandatory: no
# Default:
@@ -289,18 +290,18 @@
####### LOADABLE MODULES #######
### Option: LoadModulePath
-# Full path to location of agent modules.
-# Default depends on compilation options.
+# Full path to location of agent modules.
+# Default depends on compilation options.
#
# Mandatory: no
# Default:
# LoadModulePath=${libdir}/modules
### Option: LoadModule
-# Module to load at agent startup. Modules are used to extend functionality of the agent.
-# Format: LoadModule=<module.so>
-# The modules must be located in directory specified by LoadModulePath.
-# It is allowed to include multiple LoadModule parameters.
+# Module to load at agent startup. Modules are used to extend functionality of the agent.
+# Format: LoadModule=<module.so>
+# The modules must be located in directory specified by LoadModulePath.
+# It is allowed to include multiple LoadModule parameters.
#
# Mandatory: no
# Default:
@@ -309,37 +310,37 @@
####### TLS-RELATED PARAMETERS #######
### Option: TLSConnect
-# How the agent should connect to server or proxy. Used for active checks.
-# Only one value can be specified:
-# unencrypted - connect without encryption
-# psk - connect using TLS and a pre-shared key
-# cert - connect using TLS and a certificate
+# How the agent should connect to server or proxy. Used for active checks.
+# Only one value can be specified:
+# unencrypted - connect without encryption
+# psk - connect using TLS and a pre-shared key
+# cert - connect using TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
# Default:
# TLSConnect=unencrypted
### Option: TLSAccept
-# What incoming connections to accept.
-# Multiple values can be specified, separated by comma:
-# unencrypted - accept connections without encryption
-# psk - accept connections secured with TLS and a pre-shared key
-# cert - accept connections secured with TLS and a certificate
+# What incoming connections to accept.
+# Multiple values can be specified, separated by comma:
+# unencrypted - accept connections without encryption
+# psk - accept connections secured with TLS and a pre-shared key
+# cert - accept connections secured with TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
# Default:
# TLSAccept=unencrypted
### Option: TLSCAFile
-# Full pathname of a file containing the top-level CA(s) certificates for
-# peer certificate verification.
+# Full pathname of a file containing the top-level CA(s) certificates for
+# peer certificate verification.
#
# Mandatory: no
# Default:
# TLSCAFile=
### Option: TLSCRLFile
-# Full pathname of a file containing revoked certificates.
+# Full pathname of a file containing revoked certificates.
#
# Mandatory: no
# Default:
@@ -360,30 +361,31 @@
# TLSServerCertSubject=
### Option: TLSCertFile
-# Full pathname of a file containing the agent certificate or certificate chain.
+# Full pathname of a file containing the agent certificate or certificate chain.
#
# Mandatory: no
# Default:
# TLSCertFile=
### Option: TLSKeyFile
-# Full pathname of a file containing the agent private key.
+# Full pathname of a file containing the agent private key.
#
# Mandatory: no
# Default:
# TLSKeyFile=
### Option: TLSPSKIdentity
-# Unique, case sensitive string used to identify the pre-shared key.
+# Unique, case sensitive string used to identify the pre-shared key.
#
# Mandatory: no
# Default:
# TLSPSKIdentity=
### Option: TLSPSKFile
-# Full pathname of a file containing the pre-shared key.
+# Full pathname of a file containing the pre-shared key.
#
# Mandatory: no
# Default:
# TLSPSKFile=
+
- change mode from '0644' to '0755'
- change owner from 'root' to 'zabbix'
- change group from 'root' to 'zabbix'
* template[/etc/init.d/zabbix-agent] action create
- create new file /etc/init.d/zabbix-agent
- change mode from '' to '0755'
- change owner from '' to 'root'
- change group from '' to 'root'
* bash[agent] action run
- execute "bash" "/tmp/chef-script20170125-2651-jd9ecj"
Running handlers:
Running handlers complete
Chef Client finished, 6/7 resources updated in 01 minutes 10 seconds
我正在尝试通过厨师在AML上安装Zabbix Agent，代理正在启动，但它也在厨师运行期间停止。我可以通过登录亚马逊机器而不是通过厨师来成功启动代理。上面给出了日志文件。由于字符约束，我从chef日志中删除了init.d脚本。有什么建议 ？
答案 0 :(得分：0)
我的脚本正在创建EC2-Instance的基础AMI，这使得zabbix代理停止。我能够将zabbix-agent添加到chkconfig并解决问题。
谢谢！