Question

我有一个3节点的infinispan集群，其中numOwners = 2，当其中一个节点从网络断开连接时，我遇到集群视图问题。以下是日志：

（Incoming-1，BrokerPE-0-28575）ISPN000094：收到通道ISPN的新集群视图：[BrokerPE-0-28575 | 2] （3） [BrokerPE-0-28575， SEM03VVM-201-59385，SEM03VVM-202-33714]

ISPN000094：收到渠道ISPN的新集群视图：[BrokerPE-0-28575 | 3] （2） [BrokerPE-0-28575，SEM03VVM-202-33714] - ＆GT;一个节点已断开连接

ISPN000093：收到通道ISPN的新的MERGED集群视图：MergeView :: [BrokerPE-0-28575 | 4]（2）[BrokerPE-0-28575，SEM03VVM-201-59385]，2个子组：[BrokerPE- 0-28575 | 3]（2）[BrokerPE-0-28575，SEM03VVM-202-33714]，[BrokerPE-0-28575 | 2]（3）[BrokerPE-0-28575，SEM03VVM-201-59385，SEM03VVM- 202-33714] - ＆gt;合并不正确

以下是我的jgroups配置：

<config xmlns="urn:org:jgroups"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="urn:org:jgroups http://www.jgroups.org/schema/jgroups-3.6.xsd">
   <TCP
          bind_addr="${jgroups.tcp.address:127.0.0.1}"
        bind_port="${jgroups.tcp.port:7800}"
        loopback="true"
        port_range="30"
        recv_buf_size="20m"
        send_buf_size="640k"
        max_bundle_size="31k"
        use_send_queues="true"
        enable_diagnostics="false"
        sock_conn_timeout="300"
        bundler_type="old"

        thread_naming_pattern="pl"

        timer_type="new3"
         timer.min_threads="4"
         timer.max_threads="10"
         timer.keep_alive_time="3000"
         timer.queue_max_size="500"


        thread_pool.enabled="true"
        thread_pool.min_threads="2"
        thread_pool.max_threads="30"
        thread_pool.keep_alive_time="60000"
        thread_pool.queue_enabled="true"
        thread_pool.queue_max_size="100"
        thread_pool.rejection_policy="Discard"

        oob_thread_pool.enabled="true"
        oob_thread_pool.min_threads="2"
        oob_thread_pool.max_threads="30"
        oob_thread_pool.keep_alive_time="60000"
        oob_thread_pool.queue_enabled="false"
        oob_thread_pool.queue_max_size="100"
        oob_thread_pool.rejection_policy="Discard"

        internal_thread_pool.enabled="true"
        internal_thread_pool.min_threads="1"
        internal_thread_pool.max_threads="10"
        internal_thread_pool.keep_alive_time="60000"
        internal_thread_pool.queue_enabled="true"
        internal_thread_pool.queue_max_size="100"
        internal_thread_pool.rejection_policy="Discard"
        />

   <!-- Ergonomics, new in JGroups 2.11, are disabled by default in TCPPING until JGRP-1253 is resolved -->
   <TCPPING timeout="3000" initial_hosts="${jgroups.tcpping.initial_hosts:HostA[7800],HostB[7801]}"
            port_range="2"
            num_initial_members="3"
            ergonomics="false"
        /> 

   <!-- MPING bind_addr="${jgroups.bind_addr:127.0.0.1}" break_on_coord_rsp="true"
      mcast_addr="${jboss.default.multicast.address:228.2.4.6}"
      mcast_port="${jgroups.mping.mcast_port:43366}"
      ip_ttl="${jgroups.udp.ip_ttl:2}"
      num_initial_members="3"/-->
     <!--  <MPING bind_addr="${jgroups.bind_addr:127.0.0.1}" break_on_coord_rsp="true"
      mcast_addr="${jboss.default.multicast.address:228.2.4.6}"
      mcast_port="${jgroups.mping.mcast_port:43366}"
      ip_ttl="${jgroups.udp.ip_ttl:2}"
      num_initial_members="3"/> -->
   <MERGE3 max_interval="30000" min_interval="10000"/>

   <FD_SOCK bind_addr="${jgroups.bind_addr}"/> 
    <FD timeout="3000" max_tries="3"/> 
   <VERIFY_SUSPECT timeout="3000"/>
  <!--  <BARRIER /> -->
    <!-- <pbcast.NAKACK use_mcast_xmit="false" retransmit_timeout="300,600,1200,2400,4800" discard_delivered_msgs="true"/> -->
   <pbcast.NAKACK2 use_mcast_xmit="false"
                   xmit_interval="1000"
                   xmit_table_num_rows="100"
                   xmit_table_msgs_per_row="10000"
                   xmit_table_max_compaction_time="10000"
                   max_msg_batch_size="100" discard_delivered_msgs="true"/>
   <UNICAST3 xmit_interval="500"
             xmit_table_num_rows="20"
             xmit_table_msgs_per_row="10000"
             xmit_table_max_compaction_time="10000"
             max_msg_batch_size="100"
             conn_expiry_timeout="0"/>

   <pbcast.STABLE stability_delay="1000" desired_avg_gossip="50000" max_bytes="400000"/>
   <pbcast.GMS print_local_addr="true" join_timeout="3000" view_bundling="true" merge_timeout="6000"/>
   <tom.TOA/> <!-- the TOA is only needed for total order transactions-->

    <UFC max_credits="2m" min_threshold="0.40"/> 
   <!-- <MFC max_credits="2m" min_threshold="0.40"/> -->
   <FRAG2 frag_size="30k"/>
    <RSVP timeout="60000" resend_interval="500" ack_on_delivery="false" /> 
   <!-- <pbcast.STATE_TRANSFER/> -->
</config>

我使用的是Infinispan 7.0.2和jgroups 3.6.1版本。我尝试了很多配置，但没有任何效果。非常感谢您的帮助。

[更新]将以下属性设置为1以上后，工作正常：＆＃34;＆＃34;＆nbsp;内部线程编号＆＃34;。

Answer 1

为了简化这一点，我们有

查看经纪人| 2 = {broker，201,202}
201离开，视图现在是broker | 3 = {broker，202}
然后在视图代理| 3和代理| 2之间存在合并，导致视图代理不正确| 4 = {broker，201}

我创建[1]来调查这里发生了什么。首先，合并视图的子视图应该包括202作为子组协调员，但事实并非如此。

你能描述一下这里究竟发生了什么吗？这可以复制吗？为FD，FD_ALL，MERGE3和GMS提供TRACE级别日志会很好......

[1] https://issues.jboss.org/browse/JGRP-2128

infinispan和jgroups

1 个答案: