当我尝试在其他计算机上访问我的网站时，我收到错误＆＃34; Forbiden 403＆＃34; 我试着搜索一下如何修复它，但是toher人的conf文件似乎与我的不同，这是我打开时得到的
> httpd.conf file:
> #
> # This is the main Apache HTTP server configuration file. It contains the
> # configuration directives that give the server its instructions.
> # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
> # In particular, see
> # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
> # for a discussion of each configuration directive.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do. They're here only as hints or reminders. If you are unsure
> # consult the online docs. You have been warned.
> #
> # Configuration and logfile names: If the filenames you specify for many
> # of the server's control files begin with "/" (or "drive:/" for Win32), the
> # server will use that explicit path. If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
> # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
> # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
> # will be interpreted as '/logs/access_log'.
> #
> # NOTE: Where filenames are specified, you must use forward slashes
> # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
> # If a drive letter is omitted, the drive on which httpd.exe is located
> # will be used by default. It is recommended that you always supply
> # an explicit drive letter in absolute paths to avoid confusion. ServerSignature On ServerTokens Full
>
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # Do not add a slash at the end of the directory path. If you point
> # ServerRoot at a non-local disk, be sure to specify a local disk on the
> # Mutex directive, if file-based mutexes are used. If you wish to share the
> # same ServerRoot for multiple httpd daemons, you will need to change at
> # least PidFile.
> # ServerRoot "c:/wamp64/bin/apache/apache2.4.18"
>
> Define APACHE24 Apache2.4
>
> #
> # Mutex: Allows you to set the mutex mechanism and mutex file directory
> # for individual mutexes, or change the global defaults
> #
> # Uncomment and change the directory if mutexes are file-based and the default
> # mutex file directory is not on a local disk or is not appropriate for some
> # other reason.
> #
> # Mutex default:logs
>
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, instead of the default. See also the <VirtualHost>
> # directive.
> #
> # Change this to Listen on specific IP addresses as shown below to
> # prevent Apache from glomming onto all bound IP addresses.
> #
> #Listen 12.34.56.78:80 Listen 0.0.0.0:80 Listen [::0]:80
>
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a DSO you
> # have to place corresponding `LoadModule' lines at this location so the
> # directives contained in it are actually available _before_ they are used.
> # Statically compiled modules (those listed by `httpd -l') do not need
> # to be loaded here.
> #
> # Example:
> # LoadModule foo_module modules/mod_foo.so
> # LoadModule access_compat_module modules/mod_access_compat.so LoadModule actions_module modules/mod_actions.so LoadModule
> alias_module modules/mod_alias.so LoadModule allowmethods_module
> modules/mod_allowmethods.so LoadModule asis_module modules/mod_asis.so
> LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule
> auth_digest_module modules/mod_auth_digest.so
> #LoadModule auth_form_module modules/mod_auth_form.so
> #LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_core_module modules/mod_authn_core.so
> #LoadModule authn_dbd_module modules/mod_authn_dbd.so
> #LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_file_module modules/mod_authn_file.so
> #LoadModule authn_socache_module modules/mod_authn_socache.so
> #LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
> #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule authz_core_module modules/mod_authz_core.so
> #LoadModule authz_dbd_module modules/mod_authz_dbd.so
> #LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule
> authz_host_module modules/mod_authz_host.so
> #LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule
> autoindex_module modules/mod_autoindex.so
> #LoadModule buffer_module modules/mod_buffer.so LoadModule cache_module modules/mod_cache.so LoadModule cache_disk_module
> modules/mod_cache_disk.so
> #LoadModule cache_socache_module modules/mod_cache_socache.so
> #LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule cgi_module modules/mod_cgi.so
> #LoadModule charset_lite_module modules/mod_charset_lite.so
> #LoadModule data_module modules/mod_data.so
> #LoadModule dav_module modules/mod_dav.so
> #LoadModule dav_fs_module modules/mod_dav_fs.so
> #LoadModule dav_lock_module modules/mod_dav_lock.so
> #LoadModule dbd_module modules/mod_dbd.so
> #LoadModule deflate_module modules/mod_deflate.so LoadModule dir_module modules/mod_dir.so
> #LoadModule dumpio_module modules/mod_dumpio.so LoadModule env_module modules/mod_env.so
> #LoadModule expires_module modules/mod_expires.so
> #LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule file_cache_module modules/mod_file_cache.so
> #LoadModule filter_module modules/mod_filter.so
> #LoadModule http2_module modules/mod_http2.so
> #LoadModule headers_module modules/mod_headers.so
> #LoadModule heartbeat_module modules/mod_heartbeat.so
> #LoadModule heartmonitor_module modules/mod_heartmonitor.so
> #LoadModule ident_module modules/mod_ident.so
> #LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so
> #LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so
> #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
> #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
> #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
> #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
> #LoadModule ldap_module modules/mod_ldap.so
> #LoadModule logio_module modules/mod_logio.so LoadModule log_config_module modules/mod_log_config.so
> #LoadModule log_debug_module modules/mod_log_debug.so
> #LoadModule log_forensic_module modules/mod_log_forensic.so
> #LoadModule lua_module modules/mod_lua.so
> #LoadModule macro_module modules/mod_macro.so LoadModule mime_module modules/mod_mime.so
> #LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule negotiation_module modules/mod_negotiation.so
> #LoadModule proxy_module modules/mod_proxy.so
> #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
> #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
> #LoadModule proxy_connect_module modules/mod_proxy_connect.so
> #LoadModule proxy_express_module modules/mod_proxy_express.so
> #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
> #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
> #LoadModule proxy_html_module modules/mod_proxy_html.so
> #LoadModule proxy_http_module modules/mod_proxy_http.so
> #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
> #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
> #LoadModule ratelimit_module modules/mod_ratelimit.so
> #LoadModule reflector_module modules/mod_reflector.so
> #LoadModule remoteip_module modules/mod_remoteip.so
> #LoadModule request_module modules/mod_request.so
> #LoadModule reqtimeout_module modules/mod_reqtimeout.so LoadModule rewrite_module modules/mod_rewrite.so
> #LoadModule sed_module modules/mod_sed.so
> #LoadModule session_module modules/mod_session.so
> #LoadModule session_cookie_module modules/mod_session_cookie.so
> #LoadModule session_crypto_module modules/mod_session_crypto.so
> #LoadModule session_dbd_module modules/mod_session_dbd.so LoadModule setenvif_module modules/mod_setenvif.so
> #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
> #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
> #LoadModule socache_dbm_module modules/mod_socache_dbm.so
> #LoadModule socache_memcache_module modules/mod_socache_memcache.so
> #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
> #LoadModule speling_module modules/mod_speling.so
> #LoadModule ssl_module modules/mod_ssl.so
> #LoadModule status_module modules/mod_status.so
> #LoadModule substitute_module modules/mod_substitute.so
> #LoadModule unique_id_module modules/mod_unique_id.so LoadModule userdir_module modules/mod_userdir.so
> #LoadModule usertrack_module modules/mod_usertrack.so
> #LoadModule version_module modules/mod_version.so LoadModule vhost_alias_module modules/mod_vhost_alias.so
> #LoadModule watchdog_module modules/mod_watchdog.so
> #LoadModule xml2enc_module modules/mod_xml2enc.so
>
> LoadModule php5_module "c:/wamp64/bin/php/php5.6.19/php5apache2_4.dll"
>
> <IfModule unixd_module>
> #
> # If you wish httpd to run as a different user or group, you must run
> # httpd as root initially and it will switch.
> #
> # User/Group: The name (or #number) of the user/group to run httpd as.
> # It is usually good practice to create a dedicated user and group for
> # running httpd, as with most system services.
> # User daemon Group daemon
>
> </IfModule>
>
> # 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # <VirtualHost> definition. These values also provide defaults for
> # any <VirtualHost> containers you may define later in the file.
> #
> # All of these directives may appear inside <VirtualHost> containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
>
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed. This address appears on some server-generated pages, such
> # as error documents. e.g. admin@your-domain.com
> # ServerAdmin admin@example.com
>
> #
> # ServerName gives the name and port that the server uses to identify itself.
> # This can often be determined automatically, but we recommend you specify
> # it explicitly to prevent problems during startup.
> #
> # If your host doesn't have a registered DNS name, enter its IP address here.
> # ServerName localhost:80
>
> #
> # Deny access to the entirety of your server's filesystem. You must
> # explicitly permit access to web content directories in other
> # <Directory> blocks below.
> # <Directory />
> AllowOverride none
> Require all denied </Directory>
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> # HostnameLookups Off
>
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory, but
> # symbolic links and aliases may be used to point to other locations.
> # DocumentRoot "c:/wamp64/www" <Directory "c:/wamp64/www/">
> #
> # Possible values for the Options directive are "None", "All",
> # or any combination of:
> # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options All"
> # doesn't give it to you.
> #
> # The Options directive is both complicated and important. Please see
> # http://httpd.apache.org/docs/2.4/mod/core.html#options
> # for more information.
> #
> Options +Indexes +FollowSymLinks
>
> #
> # AllowOverride controls what directives may be placed in .htaccess files.
> # It can be "All", "None", or any combination of the keywords:
> # AllowOverride FileInfo AuthConfig Limit
> #
> AllowOverride all
>
> #
> # Controls who can get stuff from this server.
> #
>
> # onlineoffline tag - don't remove
> Require all granted
>
>
> </Directory>
>
> #
> # DirectoryIndex: sets the file that Apache will serve if a directory
> # is requested.
> # <IfModule dir_module>
> DirectoryIndex index.php index.php3 index.html index.htm </IfModule>
>
> #
> # The following lines prevent .htaccess and .htpasswd files from being
> # viewed by Web clients.
> # <Files ".ht*">
> Require all denied </Files>
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a <VirtualHost>
> # container, that host's errors will be logged there and not here.
> #
> #ErrorLog "logs/error.log" ErrorLog "c:/wamp64/logs/apache_error.log"
>
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> # LogLevel warn
>
> <IfModule log_config_module>
> #
> # The following directives define some format nicknames for use with
> # a CustomLog directive (see below).
> #
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>
> <IfModule logio_module>
> # You need to enable mod_logio.c to use %I and %O
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
> </IfModule>
>
> #
> # The location and format of the access logfile (Common Logfile Format).
> # If you do not define any access logfiles within a <VirtualHost>
> # container, they will be logged here. Contrariwise, if you *do*
> # define per-<VirtualHost> access logfiles, transactions will be
> # logged therein and *not* in this file.
> #
> CustomLog "c:/wamp64/logs/access.log" common
> #
> # If you prefer a logfile with access, agent, and referer information
> # (Combined Logfile Format) you can use the following directive.
> #
> #CustomLog "logs/access.log" combined </IfModule>
>
> <IfModule alias_module>
> #
> # Redirect: Allows you to tell clients about documents that used to
> # exist in your server's namespace, but do not anymore. The client
> # will make a new request for the document at its new location.
> # Example:
> # Redirect permanent /foo http://www.example.com/bar
>
> #
> # Alias: Maps web paths into filesystem paths and is used to
> # access content that does not live under the DocumentRoot.
> # Example:
> # Alias /webpath /full/filesystem/path
> #
> # If you include a trailing / on /webpath then the server will
> # require it to be present in the URL. You will also likely
> # need to provide a <Directory> section to allow access to
> # the filesystem path.
>
> #
> # ScriptAlias: This controls which directories contain server scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the target directory are treated as applications and
> # run by the server when requested rather than as documents sent to the
> # client. The same rules about trailing "/" apply to ScriptAlias
> # directives as to Alias.
> #
> ScriptAlias /cgi-bin/ "c:/wamp64/cgi-bin/"
>
> </IfModule>
>
> <IfModule cgid_module>
> #
> # ScriptSock: On threaded servers, designate the path to the UNIX
> # socket used to communicate with the CGI daemon of mod_cgid.
> #
> #Scriptsock cgisock </IfModule>
>
> #
> # "c:/Apache24/cgi-bin" should be changed to whatever your ScriptAliased
> # CGI directory exists, if you have that configured.
> # <Directory "c:/wamp64/cgi-bin">
> AllowOverride None
> Options None
> Require all granted </Directory>
>
> <IfModule mime_module>
> #
> # TypesConfig points to the file containing the list of mappings from
> # filename extension to MIME-type.
> #
> TypesConfig conf/mime.types
>
> #
> # AddType allows you to add to or override the MIME configuration
> # file specified in TypesConfig for specific file types.
> #
> #AddType application/x-gzip .tgz
> #
> # AddEncoding allows you to have certain browsers uncompress
> # information on the fly. Note: Not all browsers support this.
> #
> AddEncoding x-compress .Z
> AddEncoding x-gzip .gz .tgz
> #
> # If the AddEncoding directives above are commented-out, then you
> # probably should define those extensions to indicate media types:
> #
> AddType application/x-compress .Z
> AddType application/x-gzip .gz .tgz
> AddType application/x-httpd-php .php
> AddType application/x-httpd-php .php3
>
> #
> # AddHandler allows you to map certain file extensions to "handlers":
> # actions unrelated to filetype. These can be either built into the server
> # or added with the Action directive (see below)
> #
> # To use CGI scripts outside of ScriptAliased directories:
> # (You will also need to add "ExecCGI" to the "Options" directive.)
> #
> #AddHandler cgi-script .cgi
>
> # For type maps (negotiated resources):
> #AddHandler type-map var
>
> #
> # Filters allow you to process content before it is sent to the client.
> #
> # To parse .shtml files for server-side includes (SSI):
> # (You will also need to add "Includes" to the "Options" directive.)
> #
> #AddType text/html .shtml
> #AddOutputFilter INCLUDES .shtml </IfModule>
>
> #
> # The mod_mime_magic module allows the server to use various hints from the
> # contents of the file itself to determine its type. The MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> #
> #MIMEMagicFile conf/magic
>
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> #ErrorDocument 500 "The server made a boo boo."
> #ErrorDocument 404 /missing.html
> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> #ErrorDocument 402 http://www.example.com/subscription_info.html
> #
>
> #
> # MaxRanges: Maximum number of Ranges in a request before
> # returning the entire resource, or one of the special
> # values 'default', 'none' or 'unlimited'.
> # Default setting is to accept 200 Ranges.
> #MaxRanges unlimited
>
> #
> # EnableMMAP and EnableSendfile: On systems that support it,
> # memory-mapping or the sendfile syscall may be used to deliver
> # files. This usually improves server performance, but must
> # be turned off when serving from networked-mounted
> # filesystems or if support for these functions is otherwise
> # broken on your system.
> # Defaults: EnableMMAP On, EnableSendfile Off
> #
> #EnableMMAP off EnableSendfile off
>
> # AcceptFilter: On Windows, none uses accept() rather than AcceptEx() and
> # will not recycle sockets between connections. This is useful for network
> # adapters with broken driver support, as well as some virtual network
> # providers such as vpn drivers, or spam, virus or spyware filters. AcceptFilter http none AcceptFilter https none
>
> # Supplemental configuration
> #
> # The configuration files in the conf/extra/ directory can be
> # included to add extra features or to modify the default configuration of
> # the server, or you may simply copy their contents here and change as
> # necessary.
>
> # Server-pool management (MPM specific)
> #Include conf/extra/httpd-mpm.conf
>
> # Multi-language error messages
> #Include conf/extra/httpd-multilang-errordoc.conf
>
> # Fancy directory listings Include conf/extra/httpd-autoindex.conf
>
> # Language settings
> #Include conf/extra/httpd-languages.conf
>
> # User home directories
> #Include conf/extra/httpd-userdir.conf
>
> # Real-time info on requests and configuration
> #Include conf/extra/httpd-info.conf
>
> # Virtual hosts Include conf/extra/httpd-vhosts.conf
>
> # Local access to the Apache HTTP Server Manual
> #Include conf/extra/httpd-manual.conf
>
> # Distributed authoring and versioning (WebDAV)
> #Include conf/extra/httpd-dav.conf
>
> # Various default settings
> #Include conf/extra/httpd-default.conf
>
> # Configure mod_proxy_html to understand HTML4/XHTML1 <IfModule proxy_html_module> Include conf/extra/proxy-html.conf </IfModule>
>
> # Secure (SSL/TLS) connections
> #Include conf/extra/httpd-ssl.conf
> #
> # Note: The following must must be present to support
> # starting without SSL on platforms with no /dev/random equivalent
> # but a statically compiled-in mod_ssl.
> # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule>
>
> Include "c:/wamp64/alias/*"
apache错误日志：
> [Tue Aug 23 16:31:34.401164 2016] [mpm_winnt:notice] [pid 76:tid 592]
> AH00455: Apache/2.4.18 (Win64) PHP/5.6.19 configured -- resuming
> normal operations [Tue Aug 23 16:31:34.401164 2016] [mpm_winnt:notice]
> [pid 76:tid 592] AH00456: Apache Lounge VC14 Server built: Dec 9 2015
> 11:13:29 [Tue Aug 23 16:31:34.401164 2016] [core:notice] [pid 76:tid
> 592] AH00094: Command line:
> 'c:\\wamp64\\bin\\apache\\apache2.4.18\\bin\\httpd.exe -d
> C:/wamp64/bin/apache/apache2.4.18' [Tue Aug 23 16:31:34.403165 2016]
> [mpm_winnt:notice] [pid 76:tid 592] AH00418: Parent: Created child
> process 12020 [Tue Aug 23 16:31:34.723012 2016] [auth_digest:notice]
> [pid 12020:tid 444] AH01757: generating secret for digest
> authentication ... [Tue Aug 23 16:31:34.750033 2016]
> [mpm_winnt:notice] [pid 12020:tid 444] AH00354: Child: Starting 64
> worker threads. [Tue Aug 23 16:31:52.388916 2016] [authz_core:error]
> [pid 12020:tid 1120] [client 192.168.0.106:58189] AH01630: client
> denied by server configuration: C:/wamp64/www/ [Tue Aug 23
> 16:31:52.464791 2016] [authz_core:error] [pid 12020:tid 1120] [client
> 192.168.0.106:58189] AH01630: client denied by server configuration: C:/wamp64/www/favicon.ico, referer: http://google-login.tk/
答案 0 :(得分：0)
您缺少指向您的documentroot的Directory指令，并指定允许在那里进行访问。如：
<Directory /path/to/documentroot>
Require all granted
#... other directives you may need
</Directory>