Question

# make
making all in crypto...
make[1]: Entering directory '/1/openssl-1.0.2f/crypto'
/usr/bin/perl ../util/mkbuildinf.pl "cc -I. -I.. -I../include  -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -arch x86_64 -O3 -DL_ENDIAN -Wall -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -DECP_NISTZ256_ASM" "darwin64-x86_64-cc" >buildinf.h
cc -I. -I.. -I../include  -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -arch x86_64 -O3 -DL_ENDIAN -Wall -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -DECP_NISTZ256_ASM   -c -o cryptlib.o cryptlib.c
cc: error: x86_64: No such file or directory
cc: error: unrecognized command line option '-arch'
<builtin>: recipe for target 'cryptlib.o' failed
make[1]: *** [cryptlib.o] Error 1
make[1]: Leaving directory '/1/openssl-1.0.2f/crypto'
Makefile:284: recipe for target 'build_crypto' failed
make: *** [build_crypto] Error 1

那我该怎么办？

我尝试使用mingw64和mingw进行编译。

# ./Configure darwin64-x86_64-cc --prefix=/usr
Configuring for darwin64-x86_64-cc
    no-ec_nistp_64_gcc_128 [default]  OPENSSL_NO_EC_NISTP_64_GCC_128 (skip dir)
    no-gmp          [default]  OPENSSL_NO_GMP (skip dir)
    no-jpake        [experimental] OPENSSL_NO_JPAKE (skip dir)
    no-krb5         [krb5-flavor not specified] OPENSSL_NO_KRB5
    no-libunbound   [experimental] OPENSSL_NO_LIBUNBOUND (skip dir)
    no-md2          [default]  OPENSSL_NO_MD2 (skip dir)
    no-rc5          [default]  OPENSSL_NO_RC5 (skip dir)
    no-rfc3779      [default]  OPENSSL_NO_RFC3779 (skip dir)
    no-sctp         [default]  OPENSSL_NO_SCTP (skip dir)
    no-shared       [default] 
    no-ssl-trace    [default]  OPENSSL_NO_SSL_TRACE (skip dir)
    no-store        [experimental] OPENSSL_NO_STORE (skip dir)
    no-unit-test    [default]  OPENSSL_NO_UNIT_TEST (skip dir)
    no-zlib         [default] 
    no-zlib-dynamic [default] 
IsMK1MF=0
CC            =cc
CFLAG         =-DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -arch x86_64 -O3 -DL_ENDIAN -Wall -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -DECP_NISTZ256_ASM
EX_LIBS       =
CPUID_OBJ     =x86_64cpuid.o
BN_ASM        =x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o
EC_ASM        =ecp_nistz256.o ecp_nistz256-x86_64.o
DES_ENC       =des_enc.o fcrypt_b.o
AES_ENC       =aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o
BF_ENC        =bf_enc.o
CAST_ENC      =c_enc.o
RC4_ENC       =rc4_enc.o rc4_skey.o
RC5_ENC       =rc5_enc.o
MD5_OBJ_ASM   =md5-x86_64.o
SHA1_OBJ_ASM  =sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o
RMD160_OBJ_ASM=
CMLL_ENC      =cmll-x86_64.o cmll_misc.o
MODES_OBJ     =ghash-x86_64.o aesni-gcm-x86_64.o
ENGINES_OBJ   =
PROCESSOR     =
RANLIB        =/usr/bin/ranlib
ARFLAGS       =
PERL          =/usr/bin/perl
SIXTY_FOUR_BIT_LONG mode
DES_UNROLL used
DES_INT used
RC4_CHUNK is unsigned long

Answer 1

# ./Configure darwin64-x86_64-cc --prefix=/usr
Configuring for darwin64-x86_64-cc

您正在配置64位OS X.

所以需要做什么？我尝试使用mingw64和mingw编译

配置MinGW或MinGW64：

$ ./Configure LIST | grep -i mingw
    mingw
    mingw64

所以你需要使用：

进行配置

./Configure mingw64 --prefix=/usr

如果您使用的是Linux，那么通常使用以下方法之一：

$ ./Configure LIST | grep -i linux
linux-aarch64
linux-alpha+bwx-ccc
linux-alpha+bwx-gcc
linux-alpha-ccc
linux-alpha-gcc
linux-aout
linux-armv4
linux-elf
linux-generic32
linux-generic64
linux-ia32-icc
linux-ia64
linux-ia64-icc
linux-mips32
linux-mips64
linux-ppc
linux-ppc64
linux-ppc64le
linux-sparcv8
linux-sparcv9
linux-x32
linux-x86_64
linux-x86_64-clang
linux-x86_64-icc
linux32-s390x
linux64-mips64
linux64-s390x
linux64-sparcv9
uClinux-dist
uClinux-dist64
vxworks-simlinux

Answer 2

如果您使用的是Linux，则：-

$ ./Configure LIST | grep -i linux

$ ./Configure linux-x86_64 --prefix=/usr

然后再次使用您的cmd：-

$ make

OpenSSL失败“错误：x86_64：没有这样的文件或目录”

2 个答案: