我正在尝试开发一个非常简单的客户端/服务器程序，服务器部分工作正常，但我遇到了客户端部分的问题，但我无法理解原因。
客户端的工作非常简单，只需从外部设备中检索计数器值，然后我就会尝试将检索到的数据发送到服务器部分。
一开始套接字工作正常，但有一段时间我应该发送数据我得到了服务器异常，之后客户端无法正常工作。
我无法理解s.close（）函数是否正常工作。
更新：我得到的例外是＆＃34; errno 110连接超时＆＃34;
客户端：
import time, socket, struct, array, json
import Client_Axis
import sys
import serial
import os
import datetime
import re
import packet
import Config_mio
usbport = '/dev/ttyAMA0'
h = "/r/n"
if __name__=="__main__":
"""Main function that starts the server"""
curr_value = "0000000000"
prev_value = ""
line = '111111111111111'
error_counter = 0
people_in = 0
people_out = 0
txtDate = ""
no_updates_counter = 0
while True:
ser = None
try:
# print('1')
ser = serial.Serial('/dev/ttyAMA0', 9600, timeout=1)
# ser.open()
# print('2')
for line in ser.read():
line = ser.readline()
print(line[6:10])
curr_value = line
except:
print('Serial error')
# print('3')
pass
finally:
if ser:
ser.close()
try:
error_counter += 1
# print('1')
response = Client_Axis.Read_Axis_Camera_Occupancy()
content = response.split(",")
people_in_refresh = int(re.search(r'\d+', content[3]).group())
people_out_refresh = int(re.search(r'\d+', content[4]).group())
# print('2')
error_flag = 0
if people_in != people_in_refresh or people_out != people_out_refresh:
people_in = people_in_refresh
people_out = people_out_refresh
try:
# Creates TCP socket in the specified IP address and port
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
# Connect client to the server
s.connect((Config_mio.IP_Server_Add, Config_mio.ws_port))
# Create message and send it to server
timestamp = str(time.time())
# msg = packet("c", timestamp, Config_mio.RbPi_Id, content[3], content[4], None)
msg = "c"+","+str(timestamp)+","+str(Config_mio.RbPi_Id)+","+str(people_in)+","+str(people_out)+","+"None"
# json_message = json.dumps(msg)
# s.send(json_message)
s.send(msg)
print "messaggio INVIATO"
# Close connection when data is sent
#s.close()
except:
print('Server connection error 1')
pass
finally:
s.close()
#AXIS_occup_old = AXIS_occup
#AXIS_occup = response.read()
#my_dict = json.loads(AXIS_occup)
# print(AXIS_occup)
# print(my_dict)
#del my_dict["timestamp"]
#AXIS_occup = my_dict
#error_counter = 0
# print('3')
except:
error_msg = "Error retrieving occupancy from: " + Config_mio.IP_AXIS_Add
error_flag = 1
if (error_flag == 1):
no_updates_counter = 0
print "Error detected: %s \r\n" % error_msg
print error_counter
if (error_counter > 200):
os.system("sudo reboot")
elif (line[6:10] != '1111' and prev_value != curr_value):
try:
# Creates TCP socket in the specified IP address and port
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
# Connect client to the server
s.connect((Config_mio.IP_Server_Add, Config_mio.ws_port))
# Create message and send it to server
timestamp = str(time.time())
msg = "r"+","+str(timestamp)+","+str(Config_mio.RbPi_Id)+","+"None"+","+"None"+","+str(line[6:10])
#msg = {"Id": raspberry_id,
# "Ranging": line[6:10],
# "timestamp": timestamp}
#json_message = json.dumps(msg)
#s.send(json_message)
s.send(msg)
print "Message : %s" % msg
# Close connection when data is sent
s.close()
except:
print('Server connection error 2')
pass
else:
no_updates_counter += 1
# Send message despite there are no changes in value
# This is a heartbeat message of 10 min
if (no_updates_counter > 200):
no_updates_counter = 0
AXIS_occup = ""
prev_value = curr_value
# Reboot device every day - routine
# We have 4 cases incase we miss few seconds
txtDate = str(datetime.datetime.fromtimestamp(time.time()))
if (txtDate[11:19] == "00:00:00"):
os.system("sudo reboot")
if (txtDate[11:19] == "00:00:01"):
os.system("sudo reboot")
if (txtDate[11:19] == "00:00:02"):
os.system("sudo reboot")
if (txtDate[11:19] == "00:00:03"):
os.system("sudo reboot")
# Kill time - 1 sec: Remove it for high speed localisation
time.sleep(1)
服务器：
import socket
import json
import time
import Config_mio
import packet
import sqlite3 as lite
if __name__ == "__main__":
"""Main function that starts the server"""
# Creates TCP socket in the specified IP address and port
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind((Config_mio.IP_Server_Add, Config_mio.ws_port))
# Starts server, up to 10 clients are queued
s.listen(Config_mio.Max_Num_Clients)
while True:
conn, addr = s.accept()
#print "sono dopo ascolto"
msg = conn.recv(1024)
print "Data value:",msg
msg = msg.split(",")
if msg[0] == "c":
print "counter msg"
elif msg[0] == "r":
print "range msg",msg[1],msg[2],msg[5]
conn.close()