Question

好吧，我正在使用Vagrant对虚拟机进行一些测试，但现在我在更改机器的默认密码时遇到了问题，该密码是＆＃34; vagrant＆＃34;当我尝试通过终端连接throw ssh时。

这是Vagrantfile：

Vagrant.configure(2) do |config|
  config.vm.box = "192.168.0.21"
  config.ssh.username = "vagrant"
  config.ssh.password = '123'
  config.ssh.insert_key = true
  config.vm.network "public_network", bridge: "wlan0", ip: "192.168.0.21" 
  config.vm.provider "virtualbox" do |v|
    v.name = "192.168.0.21"
    v.cpus = 1
    v.memory = 512
  end
end

您意识到我将密码（config.ssh.password）更改为＆＃39; 123＆＃39;但是当我重新启动机器时（流浪汉停止 - ＆gt;并且流浪汉），会发生这种情况：

Bringing machine 'default' up with 'virtualbox' provider...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: bridged
==> default: Forwarding ports...
    default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: root
    default: SSH auth method: password
    default: Warning: Remote connection disconnect. Retrying...
    default: Warning: Remote connection disconnect. Retrying...
Text will be echoed in the clear. Please install the HighLine or Termios libraries to suppress echoed text.
root@127.0.0.1's password:

我不知道该怎么办...... 感谢您的帮助，谢谢！

Answer 1

配置不会更改机器的密码。它只是更改Vagrant用于通过SSH与机器进行身份验证的密码。 See more on docs.

如果要在计算机上更改用户密码，请使用默认密码初始化计算机，并在连接后通过SSH认证命令行（或GUI，如果在vagrant文件上配置）进行更改。

Vagrant - 更改ssh密码连接

1 个答案: