我在Vagrant框boot2docker中运行Drupal作为Docker容器（在Windows 8.1上）：
Vagrantfile （我的Docker容器）
# -*- mode: ruby -*-
# vi: set ft=ruby :
Vagrant.configure(2) do |config|
config.vm.provider "docker" do |docker|
docker.vagrant_vagrantfile = "host/Vagrantfile"
docker.image = "drupal"
docker.ports = ['80:80']
docker.name = 'drupal-container'
end
config.vm.synced_folder ".", "/vagrant", type: "smb", disabled: true
end
host / Vagrantfile （主持人）
# -*- mode: ruby -*-
# vi: set ft=ruby :
Vagrant.configure(2) do |config|
config.vm.hostname = "docker-host"
config.vm.box = "hashicorp/boot2docker"
config.vm.network "forwarded_port", guest: 80, host: 8080
end
我只需在Docker容器的目录中调用vagrant up来运行它（和主机）：
$ vagrant up
Bringing machine 'default' up with 'docker' provider...
==> default: Docker host is required. One will be created if necessary...
default: Vagrant will now create or start a local VM to act as the Docker
default: host. You'll see the output of the `vagrant up` for this VM below.
default:
default: Importing base box 'hashicorp/boot2docker'...
default: Matching MAC address for NAT networking...
default: Checking if box 'hashicorp/boot2docker' is up to date...
default: Setting the name of the VM: boot2docker_default_1463064065066_29287
default: Clearing any previously set network interfaces...
default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Forwarding ports...
default: 2375 (guest) => 2375 (host) (adapter 1)
default: 80 (guest) => 8080 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
default: Running 'pre-boot' VM customizations...
default: Booting VM...
default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: docker
default: SSH auth method: password
default: Warning: Remote connection disconnect. Retrying...
default: Warning: Remote connection disconnect. Retrying...
default: Machine booted and ready!
GuestAdditions versions on your host (5.0.20) and guest (4.3.28 r100309) do not match.
The guest's platform ("tinycore") is currently not supported, will try generic Linux method...
Copy iso file C:\Program Files/Oracle/VirtualBox/VBoxGuestAdditions.iso into the box /tmp/VBoxGuestAdditions.iso
Installing Virtualbox Guest Additions 5.0.20 - guest version is 4.3.28 r100309
mkdir: can't create directory '/tmp/selfgz98932600': No such file or directory
Cannot create target directory /tmp/selfgz98932600
You should try option --target OtherDirectory
An error occurred during installation of VirtualBox Guest Additions 5.0.20. Some functionality may not work as intended.
In most cases it is OK that the "Window System drivers" installation failed.
default: Setting hostname...
==> default: Warning: When using a remote Docker host, forwarded ports will NOT be
==> default: immediately available on your machine. They will still be forwarded on
==> default: the remote machine, however, so if you have a way to access the remote
==> default: machine, then you should be able to access those ports there. This is
==> default: not an error, it is only an informational message.
==> default: Creating the container...
default: Name: drupal-container
default: Image: drupal
default: Port: 80:80
default:
default: Container created: d12499a52f3d3f27
==> default: Starting container...
==> default: Provisioners will not be run since container doesn't support SSH.
现在我想从同一目录连接到容器：
$ vagrant ssh
==> default: SSH will be proxied through the Docker virtual machine since we're
==> default: not running Docker natively. This is just a notice, and not an error.
==> default: The machine you're attempting to SSH into is configured to use
==> default: password-based authentication. Vagrant can't script entering the
==> default: password for you. If you're prompted for a password, please enter
==> default: the same password you have configured in the Vagrantfile.
docker@127.0.0.1's password: tcuser
ssh: connect to host 172.17.0.1 port 22: Connection refused
Connection to 127.0.0.1 closed.
为什么拒绝连接？密码错误？
我也尝试使用环境的哈希。我通过
确定了哈希值$ vagrant global-status
id name provider state directory
----------------------------------------------------------------------------------------------
e4da5ae default virtualbox running c:/my-project-path/host/boot2docker
98ef037 default docker running c:/my-project-path
The above shows information about all known Vagrant environments
on this machine. This data is cached and may not be completely
up-to-date. To interact with any of the machines, you can go to
that directory and run Vagrant, or you can use the ID directly
with Vagrant commands from any directory. For example:
"vagrant destroy 1a2b3c4d"
并试图连接（同样的错误）：
$ vagrant ssh 98ef037
==> default: SSH will be proxied through the Docker virtual machine since we're
==> default: not running Docker natively. This is just a notice, and not an error.
==> default: The machine you're attempting to SSH into is configured to use
==> default: password-based authentication. Vagrant can't script entering the
==> default: password for you. If you're prompted for a password, please enter
==> default: the same password you have configured in the Vagrantfile.
docker@127.0.0.1's password: tcuser
ssh: connect to host 172.17.0.3 port 22: Connection refused
Connection to 127.0.0.1 closed.
如果我将docker.has_ssh = true添加到 Vagrantfile （我很困惑，是否需要它，因为我可以在没有它的情况下调用vagrant ssh）：
# -*- mode: ruby -*-
# vi: set ft=ruby :
Vagrant.configure(2) do |config|
config.vm.provider "docker" do |docker|
docker.vagrant_vagrantfile = "host/Vagrantfile"
docker.image = "drupal"
docker.ports = ['80:80']
docker.name = 'drupal-container'
docker.has_ssh = true
end
config.vm.synced_folder ".", "/vagrant", type: "smb", disabled: true
end
然后我无法运行/重新加载我的容器，因为它无限期地等待机器启动：
$ vagrant reload
==> default: Stopping container...
==> default: Starting container...
==> default: Waiting for machine to boot. This may take a few minutes...
Timed out while waiting for the machine to boot. This means that
Vagrant was unable to communicate with the guest machine within
the configured ("config.vm.boot_timeout" value) time period.
If you look above, you should be able to see the error(s) that
Vagrant had when attempting to connect to the machine. These errors
are usually good hints as to what may be wrong.
If you're using a custom box, make sure that networking is properly
working and you're able to connect to the machine. It is a common
problem that networking isn't setup properly in these boxes.
Verify that authentication configurations are also setup properly,
as well.
If the box appears to be booting properly, you may want to increase
the timeout ("config.vm.boot_timeout") value.
那么如何使用vagrant ssh连接到我的Docker容器？
注意：我可以先连接到主机，然后在其上调用docker
$ cd host
$ vagrant ssh
==> default: The machine you're attempting to SSH into is configured to use
==> default: password-based authentication. Vagrant can't script entering the
==> default: password for you. If you're prompted for a password, please enter
==> default: the same password you have configured in the Vagrantfile.
docker@127.0.0.1's password: tcuser
## .
## ## ## ==
## ## ## ## ## ===
/"""""""""""""""""\___/ ===
~~~ {~~ ~~~~ ~~~ ~~~~ ~~~ ~ / ===- ~~~
\______ o __/
\ \ __/
\____\_______/
_ _ ____ _ _
| |__ ___ ___ | |_|___ \ __| | ___ ___| | _____ _ __
| '_ \ / _ \ / _ \| __| __) / _` |/ _ \ / __| |/ / _ \ '__|
| |_) | (_) | (_) | |_ / __/ (_| | (_) | (__| < __/ |
|_.__/ \___/ \___/ \__|_____\__,_|\___/ \___|_|\_\___|_|
Boot2Docker version 1.7.0, build master : 7960f90 - Thu Jun 18 18:31:45 UTC 2015
Docker version 1.7.0, build 0baf609
docker@docker-host:~$ sudo docker exec -t -i drupal-container /bin/bash
root@d12499a52f3d:/var/www/html#
但这是一个不切实际的解决方法。我只想在容器的目录中调用vagrant ssh来连接到容器（常见的Vagrant工作流）。