我有服务器和客户端控制台应用程序，可以很好地进行通信以及发送一些字符串。这是代码......
服务器
public static void Main()
{
try
{
IPAddress ipAd = IPAddress.Parse("127.0.0.1");
/* Initializes the Listener */
TcpListener myList = new TcpListener(ipAd, 1234);
/* Start Listeneting at the specified port */
myList.Start();
Console.WriteLine("The server is running at port 8001...");
Console.WriteLine("The local End point is :" + myList.LocalEndpoint);
Console.WriteLine("Waiting for a connection.....");
Socket s = myList.AcceptSocket();
Console.WriteLine("Connection accepted from " + s.RemoteEndPoint);
byte[] b = new byte[100];
int k = s.Receive(b);
Console.WriteLine("Recieved...");
for (int i = 0; i < k; i++)
Console.Write(Convert.ToChar(b[i]));
ASCIIEncoding asen = new ASCIIEncoding();
s.Send(asen.GetBytes("The string was recieved by the server."));
Console.WriteLine("\nSent Acknowledgement");
/* clean up */
s.Close();
myList.Stop();
}
catch (Exception e)
{
Console.WriteLine("Error..... " + e.StackTrace);
}
}
客户端
public static void Main()
{
try
{
TcpClient tcpclnt = new TcpClient();
Console.WriteLine("Connecting...");
tcpclnt.Connect("127.0.0.1", 1234);
Console.WriteLine("Connected");
Console.Write("Enter the string to be transmitted: ");
String str = Console.ReadLine();
Stream stm = tcpclnt.GetStream();
ASCIIEncoding asen = new ASCIIEncoding();
byte[] ba = asen.GetBytes(str);
Console.WriteLine("Transmitting...");
stm.Write(ba, 0, ba.Length);
byte[] bb = new byte[100];
int k = stm.Read(bb, 0, 100);
for (int i = 0; i < k; i++)
Console.Write(Convert.ToChar(bb[i]));
tcpclnt.Close();
}
catch (Exception e)
{
Console.WriteLine("Error... " + e.StackTrace);
}
}
现在，我需要添加代码算法，该算法将通过相同的应用程序发送文件。要实现的关键是在客户端使用Socket.Send。我不确定该文件的序列化和反序列化。
任何提示，建议和建议都是值得欢迎的。感谢。
答案 0 :(得分：4)
根据要求，您可以按照this post的建议在客户端执行以下操作，但您可能需要考虑将同步Send部分更改为异步Send这样：
clientSocket.BeginSend(bytes, 0, bytes.Length, SocketFlags.None, endSendCallback, clientSocket); //use async
你的回调可能如下所示：
private static void endSendCallback(IAsyncResult ar) {
try {
SocketError errorCode;
int result = clientSocket.EndSend(ar, out errorCode);
Console.WriteLine(errorCode == SocketError.Success ?
"Successful! The size of the message sent was :" + result.ToString() :
"Error with error code: " + errorCode.ToString() //you probably want to consider to resend if there is error code, but best practice is to handle the error one by one
);
} catch (Exception e) { //exception
Console.WriteLine("Unhandled EndSend Exception! " + e.ToString());
//do something like retry or just report that the sending fails
//But since this is an exception, it probably best NOT to retry
}
}
关于上述变更之后的完整客户端代码如何：
using System;
using System.Collections.Generic;
using System.Linq;
using System.Net;
using System.Net.Sockets;
using System.Text;
using System.Threading.Tasks;
namespace TcpClientConsoleApplication {
class Program {
const int PORT_NO = 2201;
const string SERVER_IP = "127.0.0.1";
static Socket clientSocket; //put here
static void Main(string[] args) {
//Similarly, start defining your client socket as soon as you start.
clientSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);
loopConnect(3, 3); //for failure handling
string result = "";
do {
result = Console.ReadLine(); //you need to change this part
if (result.ToLower().Trim() != "exit") {
byte[] bytes = Encoding.ASCII.GetBytes(result); //Again, note that your data is actually of byte[], not string
//do something on bytes by using the reference such that you can type in HEX STRING but sending thing in bytes
clientSocket.BeginSend(bytes, 0, bytes.Length, SocketFlags.None, endSendCallback, clientSocket); //use async
//clientSocket.Send(bytes); use this for sync send
}
} while (result.ToLower().Trim() != "exit");
}
private static void endSendCallback(IAsyncResult ar) {
try {
SocketError errorCode;
int result = clientSocket.EndSend(ar, out errorCode);
Console.WriteLine(errorCode == SocketError.Success ?
"Successful! The size of the message sent was :" + result.ToString() :
"Error with error code: " + errorCode.ToString() //you probably want to consider to resend if there is error code, but best practice is to handle the error one by one
);
} catch (Exception e) { //exception
Console.WriteLine("Unhandled EndSend Exception! " + e.ToString());
//do something like retry or just report that the sending fails
//But since this is an exception, it probably best NOT to retry
}
}
static void loopConnect(int noOfRetry, int attemptPeriodInSeconds) {
int attempts = 0;
while (!clientSocket.Connected && attempts < noOfRetry) {
try {
++attempts;
IAsyncResult result = clientSocket.BeginConnect(IPAddress.Parse(SERVER_IP), PORT_NO, endConnectCallback, null);
result.AsyncWaitHandle.WaitOne(TimeSpan.FromSeconds(attemptPeriodInSeconds));
System.Threading.Thread.Sleep(attemptPeriodInSeconds * 1000);
} catch (Exception e) {
Console.WriteLine("Error: " + e.ToString());
}
}
if (!clientSocket.Connected) {
Console.WriteLine("Connection attempt is unsuccessful!");
return;
}
}
private const int BUFFER_SIZE = 4096;
private static byte[] buffer = new byte[BUFFER_SIZE]; //buffer size is limited to BUFFER_SIZE per message
private static void endConnectCallback(IAsyncResult ar) {
try {
clientSocket.EndConnect(ar);
if (clientSocket.Connected) {
clientSocket.BeginReceive(buffer, 0, buffer.Length, SocketFlags.None, new AsyncCallback(receiveCallback), clientSocket);
} else {
Console.WriteLine("End of connection attempt, fail to connect...");
}
} catch (Exception e) {
Console.WriteLine("End-connection attempt is unsuccessful! " + e.ToString());
}
}
const int MAX_RECEIVE_ATTEMPT = 10;
static int receiveAttempt = 0;
private static void receiveCallback(IAsyncResult result) {
System.Net.Sockets.Socket socket = null;
try {
socket = (System.Net.Sockets.Socket)result.AsyncState;
if (socket.Connected) {
int received = socket.EndReceive(result);
if (received > 0) {
receiveAttempt = 0;
byte[] data = new byte[received];
Buffer.BlockCopy(buffer, 0, data, 0, data.Length); //There are several way to do this according to https://stackoverflow.com/questions/5099604/any-faster-way-of-copying-arrays-in-c in general, System.Buffer.memcpyimpl is the fastest
//DO ANYTHING THAT YOU WANT WITH data, IT IS THE RECEIVED PACKET!
//Notice that your data is not string! It is actually byte[]
//For now I will just print it out
Console.WriteLine("Server: " + Encoding.UTF8.GetString(data));
socket.BeginReceive(buffer, 0, buffer.Length, SocketFlags.None, new AsyncCallback(receiveCallback), socket);
} else if (receiveAttempt < MAX_RECEIVE_ATTEMPT) { //not exceeding the max attempt, try again
++receiveAttempt;
socket.BeginReceive(buffer, 0, buffer.Length, SocketFlags.None, new AsyncCallback(receiveCallback), socket);
} else { //completely fails!
Console.WriteLine("receiveCallback is failed!");
receiveAttempt = 0;
clientSocket.Close();
}
}
} catch (Exception e) { // this exception will happen when "this" is be disposed...
Console.WriteLine("receiveCallback is failed! " + e.ToString());
}
}
}
}
关于上述代码如何工作的完整说明（请注意，第7点已更改，而第8点已添加为异步Send）：
<强>客户端：
同样，将Socket类放在类上下文而不是方法上下文中，并在启动程序后立即对其进行初始化
const int PORT_NO = 2201;
const string SERVER_IP = "127.0.0.1";
static Socket clientSocket; //put here
static void Main(string[] args) {
//Similarly, start defining your client socket as soon as you start.
clientSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);
//your other main routines
}
然后开始按ASync BeginConnect进行连接。我通常会LoopConnect更进一步，因为这样的失败处理。
static void loopConnect(int noOfRetry, int attemptPeriodInSeconds) {
int attempts = 0;
while (!clientSocket.Connected && attempts < noOfRetry) {
try {
++attempts;
IAsyncResult result = clientSocket.BeginConnect(IPAddress.Parse(SERVER_IP), PORT_NO, endConnect, null);
result.AsyncWaitHandle.WaitOne(TimeSpan.FromSeconds(attemptPeriodInSeconds));
System.Threading.Thread.Sleep(attemptPeriodInSeconds * 1000);
} catch (Exception e) {
Console.WriteLine("Error: " + e.ToString());
}
}
if (!clientSocket.Connected) {
Console.WriteLine("Connection attempt is unsuccessful!");
return;
}
}
与您对服务器BeginAccept所做的相似的概念，您需要为您使用的endConnectCallback ASync定义BeginConnect。但是，不像服务器需要重新调用BeginAccept，一旦连接，您就不需要执行任何新的BeginConnect，因为您只需要连接<强>一旦
您可能需要声明buffer等。然后，在您连接后，请不要忘记下一个ASync BeginReceive来处理邮件检索部分（类似与服务器）
private const int BUFFER_SIZE = 4096;
private static byte[] buffer = new byte[BUFFER_SIZE]; //buffer size is limited to BUFFER_SIZE per message
private static void endConnectCallback(IAsyncResult ar) {
try {
clientSocket.EndConnect(ar);
if (clientSocket.Connected) {
clientSocket.BeginReceive(buffer, 0, buffer.Length, SocketFlags.None, new AsyncCallback(receiveCallback), clientSocket);
} else {
Console.WriteLine("End of connection attempt, fail to connect...");
}
} catch (Exception e) {
Console.WriteLine("End-connection attempt is unsuccessful! " + e.ToString());
}
}
当然，您需要定义receiveCallback，就像您为服务器所做的那样。是的，正如您所猜测的那样，它几乎与您为服务器所做的完全相同！
您可以使用数据执行任何操作。请注意，您收到的数据实际上位于byte[]，而不是string。所以你可以用它做任何事情。但例如，我只会使用string来显示。
const int MAX_RECEIVE_ATTEMPT = 10;
static int receiveAttempt = 0;
private static void receiveCallback(IAsyncResult result) {
System.Net.Sockets.Socket socket = null;
try {
socket = (System.Net.Sockets.Socket)result.AsyncState;
if (socket.Connected) {
int received = socket.EndReceive(result);
if (received > 0) {
receiveAttempt = 0;
byte[] data = new byte[received];
Buffer.BlockCopy(buffer, 0, data, 0, data.Length); //copy the data from your buffer
//DO ANYTHING THAT YOU WANT WITH data, IT IS THE RECEIVED PACKET!
//Notice that your data is not string! It is actually byte[]
//For now I will just print it out
Console.WriteLine("Server: " + Encoding.UTF8.GetString(data));
socket.BeginReceive(buffer, 0, buffer.Length, SocketFlags.None, new AsyncCallback(receiveCallback), socket);
} else if (receiveAttempt < MAX_RECEIVE_ATTEMPT) { //not exceeding the max attempt, try again
++receiveAttempt;
socket.BeginReceive(buffer, 0, buffer.Length, SocketFlags.None, new AsyncCallback(receiveCallback), socket);
} else { //completely fails!
Console.WriteLine("receiveCallback is failed!");
receiveAttempt = 0;
clientSocket.Close();
}
}
} catch (Exception e) { // this exception will happen when "this" is be disposed...
Console.WriteLine("receiveCallback is failed! " + e.ToString());
}
}
下一个（在最后一个之前） - 是的，再次，正如您已经猜到的那样，您只需要在主程序上执行某些操作 - 假设您要将其用于BeginSend数据。由于您使用Console，但希望它以byte[]的形式发送内容，因此您需要进行转换（请参阅linked post的服务器9中的说明）。
static void Main(string[] args) {
//Similarly, start defining your client socket as soon as you start.
clientSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);
loopConnect(3, 3); //for failure handling
string result = "";
do {
result = Console.ReadLine(); //you need to change this part
if (result.ToLower().Trim() != "exit") {
byte[] bytes = Encoding.ASCII.GetBytes(result); //Again, note that your data is actually of byte[], not string
//do something on bytes by using the reference such that you can type in HEX STRING but sending thing in bytes
clientSocket.BeginSend(bytes, 0, bytes.Length, SocketFlags.None, endSendCallback, clientSocket); //use async
//clientSocket.Send(bytes); use this for sync send
}
} while (result.ToLower().Trim() != "exit");
}
最后，在最后，您只需要声明异步EndSend回调函数，就完成了！
private static void endSendCallback(IAsyncResult ar) {
try {
SocketError errorCode;
int result = clientSocket.EndSend(ar, out errorCode);
Console.WriteLine(errorCode == SocketError.Success ?
"Successful! The size of the message sent was :" + result.ToString() :
"Error with error code: " + errorCode.ToString() //you probably want to consider to resend if there is error code, but best practice is to handle the error one by one
);
} catch (Exception e) { //exception
Console.WriteLine("Unhandled EndSend Exception! " + e.ToString());
//do something like retry or just report that the sending fails
//But since this is an exception, it probably best NOT to retry
}
}
答案 1 :(得分：1)
您只需要将文件作为字节数组读取，然后通过线路发送该字节数组
var bytes = File.ReadAllBytes(path);
stm.Write(bytes , 0, bytes .Length);
答案 2 :(得分：1)
File.ReadAllBytes(string path)将为您提供文件的字节数组。
File.WriteAllBytes(string path, byte[] bytes)会将其写入磁盘。
帮助区分文件/命令/状态/等。您可以在前面添加一个字节标题的消息内容。枚举：字节可能在这里派上用场。