Question

我正在编写一个代码，询问用户一个百分比，并一直询问，直到用户输入了可接受的输入。但是当我运行它时，无论我输入什么样的输入，while循环都不会中断。

这是我的代码：

import math

while True:
    try:
        entered = float(raw_input("Please enter the velocity (as a percentage of the speed of light): "))
    except ValueError:
        print("Sorry, an acceptable input was not entered. Try again.")
        continue

    if entered > 100:
        print("Sorry, a velocity greater than the speed of light cannot be used. Try again.")
        continue
    elif entered <= 0:
        print("Sorry, a percent cannot be negative. Try again.")
        continue
    else:
        #the percent entered is valid, break out of while loop
        break

print("Ship is traveling at ", entered, "% the speed of light.")
print("  ")

speedOfLight = 299792458                         #speed of light constant
percentage = entered / 100                       #turn entered percent into decimal
speed = speedOfLight * percentage                #actual speed (in m/s)         
denominator = math.sqrt(1 - (percentage ** 2))   #denominator of factor equation
factor =  1 / denominator                        #solve for given factor equation

shipWeight = 70000 * factor                      #given ship weight * factor
alphaCentauri = 4.3 / factor                     # given times divided by the factor
barnardsStar = 6.0 / factor
betelgeuse = 309 /factor
andromeda = 2000000 / factor

print("At this speed: ")
print("    Weight of the shuttle is ", shipWeight)
print("    Perceived time to travel to Alpha Centauri is ", alphaCentauri, " years.")
print("    Perceived time to travel to Barnard's Star is ", barnardsStar, " years.")
print("    Perceived time to travel to Betelgeuse is ", betelgeuse, " years.")
print("    Perceived time to travel to Andromeda Galaxy is ", andromeda, " years.")

Answer 1

您正在检查except内的数据输入。你永远不会进入你的内心，除非转向float引发ValueError。

您只是想将条件移到except块之外，这样您就可以检查通过float转换的数据：

while True:
    try:
        entered = float(input("Please enter the velocity (as a percentage of the speed of light): "))
    except ValueError:
        print("Sorry, an acceptable input was not entered. Try again.")
        continue

    if entered > 100:
        print("Sorry, a velocity greater than the speed of light cannot be used. Try again.")
        continue
    elif entered <= 0:
        print("Sorry, a percent cannot be negative. Try again.")
        continue
    else:
        #the percent entered is valid, break out of while loop
        break

Answer 2

你的缩进有点不稳定，代码永远不会到达break语句，因为在此之前你continue循环。幸运的是，您可以使用else关键字使其正常工作：

while True:
    try:
        entered = float(raw_input("Please enter the velocity (as a percentage of the speed of light): "))
    except ValueError:
        print("Sorry, an acceptable input was not entered. Try again.")
        continue
    else: # no exception
        if entered > 100:
            print("Sorry, a velocity greater than the speed of light cannot be used. Try again.")
            continue
        elif entered <= 0:
            print("Sorry, a percent cannot be negative. Try again.")
            continue
        else:
            #the percent entered is valid, break out of while loop
            break

Answer 3

你甚至不需要继续/休息来完成这项工作。你还需要“导入数学”，一旦你最终打破了while循环，这将很重要。

你需要做的是观察凹痕。 try / except是不合适的 - 如果这反映了代码实际编写的方式，那将解释你的永无止境的while循环。

以下工作正如您所希望的那样只有缩进修复和“导入数学”

import math

valid = False

while not valid:
    try:
            entered = float(raw_input("Please enter the velocity (as a percentage of the speed of light): "))
    except ValueError:
            print("Sorry, an acceptable input was not entered. Try again.")
            continue

    if entered > 100:
        print("Sorry, a velocity greater than the speed of light cannot be used. Try again.")
    elif entered <= 0:
        print("Sorry, a percent cannot be negative. Try again.")
    else:
        #the percent entered is valid, break out of while loop
            valid = True

print("Ship is traveling at ", entered, "% the speed of light.")
print("  ")

speedOfLight = 299792458                         #speed of light constant
percentage = entered / 100                       #turn entered percent into decimal
speed = speedOfLight * percentage                #actual speed (in m/s)         
denominator = math.sqrt(1 - (percentage ** 2))   #denominator of factor equation
factor =  1 / denominator                        #solve for given factor equation

shipWeight = 70000 * factor                      #given ship weight * factor
alphaCentauri = 4.3 / factor                     # given times divided by the factor
barnardsStar = 6.0 / factor
betelgeuse = 309 /factor
andromeda = 2000000 / factor

print("At this speed: ")
print("    Weight of the shuttle is ", shipWeight)
print("    Perceived time to travel to Alpha Centauri is ", alphaCentauri, " years.")
print("    Perceived time to travel to Barnard's Star is ", barnardsStar, " years.")
print("    Perceived time to travel to Betelgeuse is ", betelgeuse, " years.")
print("    Perceived time to travel to Andromeda Galaxy is ", andromeda, " years.")

虽然循环在Python中连续运行，但输入还是不错？

3 个答案: