Question

我正在尝试配置我的snmp守护程序，但我似乎遇到了一些困难。每当我尝试运行以下命令时：

snmpget -u bootstrap -l authPriv -a MD5 -x DES -A temp_password -X temp_password remote_host 1.3.6.1.2.1.1.1.0

我收到错误声明：

snmpget: Unsupported security level

我一直在关注本教程：https://www.digitalocean.com/community/tutorials/how-to-install-and-configure-an-snmp-daemon-and-client-on-ubuntu-14-04。我做了一些阅读，发现我在创建用户方面失败了。我已将下面使用的代码放在下面：

###############################################################################                                              
#                                                                                                                            
#  SNMPv3 AUTHENTICATION                                                                                                     
#                                                                                                                            
#  Note that these particular settings don't actually belong here.                                                           
#  They should be copied to the file /var/lib/snmp/snmpd.conf                                                                
#     and the passwords changed, before being uncommented in that file *only*.                                               
#  Then restart the agent                                                                                                    

#  createUser authOnlyUser  MD5 "remember to change this password"                                                           
#  createUser authPrivUser  SHA "remember to change this one too"  DES                                                       
#  createUser internalUser  MD5 "this is only ever used internally, but still change the password"                           

#  If you also change the usernames (which might be sensible),                                                               
#  then remember to update the other occurances in this example config file to match. 
###############################################################################                                              
#                                                                                                                            
#  ACCESS CONTROL                                                                                                            
#                                                                                                                            

                                                 #  system + hrSystem groups only                                            
view   systemonly  included   .1.3.6.1.2.1.1
view   systemonly  included   .1.3.6.1.2.1.25.1

                                                 #  Full access from the local host                                          
 rocommunity public  localhost
# rocommunity public                                                                                                         
                                                 #  Default access to basic system info                                      
 rocommunity public  default    -V systemonly
                                                 #  rocommunity6 is for IPv6                                                 
 rocommunity6 public  default   -V systemonly

                                                 #  Full access from an example network                                      
                                                 #     Adjust this network address to match your local                       
                                                 #     settings, change the community string,                                
                                                 #     and check the 'agentAddress' setting above                            
#rocommunity secret  10.0.0.0/16                                                                                             

                                                 #  Full read-only access for SNMPv3                                         
 rouser   authOnlyUser
                                                 #  Full write access for encrypted requests                                 
                                                 #     Remember to activate the 'createUser' lines above                     
# create temporary user                                                                                                      
createUser bootstrap MD5 "temp_password" DES

# set up level of acccess that user will have. allow for read write access                                                   
rwuser bootstrap priv
rwuser demo priv
#rwuser   authPrivUser   priv

我相信我已经正确创建了用户并通过rwuser命令提供了正确的授权。任何有助于进一步调试我的代码的帮助将不胜感激。

Answer 1

我认为是因为这条线：

rwuser bootstrap priv

它应该是这样的：

rwuser bootstrap authPriv

如果你给出了什么＆＃34;安全等级＆＃34;对于用户，他只能使用＆＃34;＆＃34;安全级别＆＃34;验证

SNMP不支持的安全级别

1 个答案: