我这样做是Ambari设置的一部分。跟随Ambari和Vagrant的quick start步骤。
我使用的是CentOS 6.4图像：
https://github.com/u39kun/ambari-vagrant/blob/master/centos6.4/Vagrantfile
我是通过RHEL 7.2主机和VirtualBox 5在Google Cloud上完成此操作，但是按照建议安装了CentOS 6.4来宾。
我成功安装并配置了pre-requisities（需要进行调整才能使vbox 5在RHEL 7.2上运行）。
当我尝试调出6台主机时，我会看到机器没有出现的超时时间。
我正在运行的主机很快 - 32核，64 GB RAM，500 GB SSD ......
有谁知道可能是什么问题？ 我需要关闭一些防火墙吗？
[<myuser>@ambari-host-rhel7 centos6.4]$ ./up.sh 6
Bringing machine 'c6401' up with 'virtualbox' provider...
==> c6401: Box 'centos6.4' could not be found. Attempting to find and install... c6401: Box Provider: virtualbox c6401: Box Version: >= 0
==> c6401: Box file was not detected as metadata. Adding it directly...
==> c6401: Adding box 'centos6.4' (v0) for provider: virtualbox c6401: Downloading: http://developer.nrel.gov/downloads/vagrant-boxes/CentOS-6.4-x86_64-v20130427.box
==> c6401: Box download is resuming from prior download progress
==> c6401: Successfully added box 'centos6.4' (v0) for 'virtualbox'!
==> c6401: Importing base box 'centos6.4'...
==> c6401: Matching MAC address for NAT networking...
==> c6401: Setting the name of the VM: centos64_c6401_1456171923223_2329
==> c6401: Clearing any previously set network interfaces...
==> c6401: Preparing network interfaces based on configuration... c6401: Adapter 1: nat c6401: Adapter 2: hostonly
==> c6401: Forwarding ports... c6401: 22 (guest) => 2222 (host) (adapter 1)
==> c6401: Running 'pre-boot' VM customizations...
==> c6401: Booting VM...
==> c6401: Waiting for machine to boot. This may take a few minutes... c6401: SSH address: 127.0.0.1:2222 c6401: SSH username: vagrant c6401: SSH auth method: private key
Timed out while waiting for the machine to boot. This means thatVagrant was unable to communicate with the guest machine withinthe configured ("config.vm.boot_timeout" value) time period.If you look above, you should be able to see the error(s) thatVagrant had when attempting to connect to the machine. These errorsare usually good hints as to what may be wrong.If you're using a custom box, make sure that networking is properlyworking and you're able to connect to the machine. It is a commonproblem that networking isn't setup properly in these boxes.Verify that authentication configurations are also setup properly,as well.If the box appears to be booting properly, you may want to increasethe timeout ("config.vm.boot_timeout") value.
作为最后一步，我得到了这个摘要错误：
There was an error while executing `VBoxManage`, a CLI used by Vagrantfor controlling VirtualBox.
The command and stderr is shown below.
Command: ["import", "/home/<me>/.vagrant.d/boxes/centos6.4/0/virtualbox/box.ovf", "--vsys", "0", "--vmname", "CentOS-6.4-x86_64_1456173504674_45962", "--vsys", "0", "--unit", "9", "--disk", "/home/<me>/VirtualBox VMs/CentOS-6.4-x86_64_1456173504674_45962/box-disk1.vmdk"]
Stderr: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Interpreting /home/<me>/.vagrant.d/boxes/centos6.4/0/virtualbox/box.ovf...OK.0%...
Progress state: VBOX_E_FILE_ERRORVBoxManage: error: Appliance import failedVBoxManage: error: Could not create the imported medium '/home/<me>/VirtualBox VMs/CentOS-6.4-x86_64_1456173504674_45962/box-disk1.vmdk'.
VBoxManage: error: VMDK: cannot write allocated data block in '/home/<me>/VirtualBox VMs/CentOS-6.4-x86_64_1456173504674_45962/box-disk1.vmdk' (VERR_DISK_FULL)
VBoxManage: error: Details: code VBOX_E_FILE_ERROR (0x80bb0004), component ApplianceWrap, interface IAppliance
VBoxManage: error: Context: "RTEXITCODE handleImportAppliance(HandlerArg*)" at line 877 of file VBoxManageAppliance.cpp
有什么想法可能会发生什么？
答案 0 :(得分：0)
你的硬盘上还有空闲空间吗？
通常VERR_DISK_FULL表示硬盘已满，无法为vdi文件提供足够的空间。