Vagrant无法与虚拟机通信

时间:2016-02-20 09:40:29

标签: vagrant virtualbox

我在Windows 10上。我已经安装了oracle虚拟盒子。当我尝试在命令提示符中使用命令'vagrant up'时,我在15分钟后出现错误。这是我在命令提示符下得到的。

Bringing machine 'sparkvm' up with 'virtualbox' provider...
==> sparkvm: Checking if box 'sparkmooc/base2' is up to date..
==> sparkvm: Clearing any previously set forwarded ports...
==> sparkvm: Clearing any previously set network interfaces...
==> sparkvm: Preparing network interfaces based on configuration...
    sparkvm: Adapter 1: nat
==> sparkvm: Forwarding ports...
    sparkvm: 8001 (guest) => 8001 (host) (adapter 1)
    sparkvm: 4040 (guest) => 4040 (host) (adapter 1)
    sparkvm: 22 (guest) => 2222 (host) (adapter 1)
==> sparkvm: Booting VM...
==> sparkvm: Waiting for machine to boot. This may take a few minutes...
    sparkvm: SSH address: 127.0.0.1:2222
    sparkvm: SSH username: vagrant
    sparkvm: SSH auth method: private key
Timed out while waiting for the machine to boot. This means that
Vagrant was unable to communicate with the guest machine within
the configured ("config.vm.boot_timeout" value) time period.

If you look above, you should be able to see the eror(s) that
Vagrant had when attempting to connect to the machine. These errors
are usually good hints as to what may be wrong.

If you're using a custom box, make sure that networking is properly 
working and you're able to connect to the machine. It is a common 
problem that networking isn't setup properly in these boxes.
Verify that authentication configurations are also setup properly,
as well.

If the box appears to be booting properly, you may want to increase
the timeout ("config.vm.boot_timeout") value.

我正在使用虚拟机版本5.0.14r105127,我的流浪汉版本是1.8.1,我的流浪文件看起来像这样:

# -*- mode: ruby -*-
# vi: set ft=ruby :

ipythonPort = 8001                 # Ipython port to forward (also set in      IPython notebook config)

Vagrant.configure(2) do |config|
  config.ssh.insert_key = true
  config.vm.define "sparkvm" do |master|
    master.vm.box = "sparkmooc/base2"
    master.vm.box_download_insecure = true
    master.vm.boot_timeout = 900
    master.vm.network :forwarded_port, host: ipythonPort, guest:     ipythonPort, auto_correct: true   # IPython port (set in notebook config)
    master.vm.network :forwarded_port, host: 4040, guest: 4040,     auto_correct: true                 # Spark UI (Driver)
    master.vm.hostname = "sparkvm"
    master.vm.usable_port_range = 4040..4090

    master.vm.provider :virtualbox do |v|
      v.name = master.vm.hostname.to_s
    end
  end
end

有人可以告诉我这里出了什么问题吗?

0 个答案:

没有答案