我想在Linux上用usb硬盘安装一个外部磁盘,但是我没有得到它

时间:2016-02-20 00:02:43

标签: linux ubuntu-14.04

当我select RIGHT('00' + CONVERT(NVARCHAR(4), datepart(month, dateadd(month, -3, getdate() ) ) ), 2 ) 获得以下输出

fsdisk -l

我制作ls / dev / sd *

miguel@127:/var/log$ sudo fdisk -l

Disco /dev/sda: 500.1 GB, 500107862016 bytes
255 cabezas, 63 sectores/pista, 60801 cilindros, 976773168 sectores en total
Unidades = sectores de 1 * 512 = 512 bytes
Tamaño de sector (lógico / físico): 512 bytes / 512 bytes
Tamaño E/S (mínimo/óptimo): 512 bytes / 512 bytes
Identificador del disco: 0x0000ee6f

Dispositivo Inicio    Comienzo      Fin      Bloques  Id  Sistema
/dev/sda1   *        2048   968912895   484455424   83  Linux
/dev/sda2       968914942   976771071     3928065    5  Extendida
/dev/sda5       968914944   976771071     3928064   82  Linux swap / Solaris

当我输入命令dmesg时,请在

下面输出以下内容
miguel@127:/var/log$ ls /dev/sd*
/dev/sda  /dev/sda1  /dev/sda2  /dev/sda5  /dev/sdb

我试图安装以下

miguel@127:/var/log$ dmesg | tail
[11880.520414] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[11880.520422] usb 1-2: Product: USB to Serial-ATA bridge
[11880.520428] usb 1-2: Manufacturer: Sunplus Innovation Technology.
[11880.520433] usb 1-2: SerialNumber: 012345678901
[11880.523640] usb-storage 1-2:1.0: USB Mass Storage device detected
[11880.524044] scsi host19: usb-storage 1-2:1.0
[11881.525029] scsi 19:0:0:0: Direct-Access     SPIF301  USB2SATA Bridge  0108 PQ: 0 ANSI: 2
[11881.526133] sd 19:0:0:0: Attached scsi generic sg1 type 0
[11881.535845] sd 19:0:0:0: [sdb] Attached SCSI removable disk
[13057.878067] systemd-hostnamed[11009]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!

0

1 个答案:

答案 0 :(得分:2)

被识别为/dev/sdb的设备显然没有分区。使用fdisk创建一个分区表,然后使用mkfs格式化分区,你应该很高兴。

如果您确定设备已经过分区和格式化,那么其他问题就出现了问题。