Question

我会尝试发布一个最小的工作示例，但不幸的是这个问题只需要很多部分，所以我尽可能地将它剥离了。

首先，我使用一个简单的脚本来模拟通过函数调用按键。这是从here调整的。

import ctypes

SendInput = ctypes.windll.user32.SendInput

PUL = ctypes.POINTER(ctypes.c_ulong)

class KeyBdInput(ctypes.Structure):
    _fields_ = [("wVk", ctypes.c_ushort),
                ("wScan", ctypes.c_ushort),
                ("dwFlags", ctypes.c_ulong),
                ("time", ctypes.c_ulong),
                ("dwExtraInfo", PUL)]

class HardwareInput(ctypes.Structure):
    _fields_ = [("uMsg", ctypes.c_ulong),
                ("wParamL", ctypes.c_short),
                ("wParamH", ctypes.c_ushort)]

class MouseInput(ctypes.Structure):
    _fields_ = [("dx", ctypes.c_long),
                ("dy", ctypes.c_long),
                ("mouseData", ctypes.c_ulong),
                ("dwFlags", ctypes.c_ulong),
                ("time",ctypes.c_ulong),
                ("dwExtraInfo", PUL)]

class Input_I(ctypes.Union):
    _fields_ = [("ki", KeyBdInput),
                 ("mi", MouseInput),
                 ("hi", HardwareInput)]

class Input(ctypes.Structure):
    _fields_ = [("type", ctypes.c_ulong),
                ("ii", Input_I)]

def getKeyCode(unicodeKey):
    k = unicodeKey
    curKeyCode = 0
    if k == "up": curKeyCode = 0x26
    elif k == "down": curKeyCode = 0x28
    elif k == "left": curKeyCode = 0x25
    elif k == "right": curKeyCode = 0x27
    elif k == "home": curKeyCode = 0x24
    elif k == "end": curKeyCode = 0x23
    elif k == "insert": curKeyCode = 0x2D
    elif k == "pgup": curKeyCode = 0x21
    elif k == "pgdn": curKeyCode = 0x22
    elif k == "delete": curKeyCode = 0x2E
    elif k == "\n": curKeyCode = 0x0D

    if curKeyCode == 0:
        return 0, int(unicodeKey.encode("hex"), 16), 0x0004
    else:
        return curKeyCode, 0, 0

def PressKey(unicodeKey):
    key, unikey, uniflag = getKeyCode(unicodeKey)

    extra = ctypes.c_ulong(0)
    ii_ = Input_I()
    ii_.ki = KeyBdInput( key, unikey, uniflag, 0, ctypes.pointer(extra) )
    x = Input( ctypes.c_ulong(1), ii_ )
    ctypes.windll.user32.SendInput(1, ctypes.pointer(x), ctypes.sizeof(x))

def ReleaseKey(unicodeKey):
    key, unikey, uniflag = getKeyCode(unicodeKey)
    extra = ctypes.c_ulong(0)
    ii_ = Input_I()
    ii_.ki = KeyBdInput( key, unikey, uniflag + 0x0002, 0, ctypes.pointer(extra) )
    x = Input( ctypes.c_ulong(1), ii_ )
    ctypes.windll.user32.SendInput(1, ctypes.pointer(x), ctypes.sizeof(x))

我将其存储在名为keyPress.py的文件中。

使用这个，我想制作一个简单的程序，可以检测用户在python shell中输入时输入的内容。我的想法是，我会使用msvcrt.getch（）来按下按键，然后上面的脚本让它看起来像是按下了（并且在某种意义上“回显”按键“）

以下是代码：

import keyPress
import msvcrt        
import threading

def getKey():

    k = msvcrt.getch()

    # Escaped Key: 224 is on the keyboard, 0 is on the numpad
    if int(k.encode("hex"), 16) == 224 or int(k.encode("hex"), 16) == 0:
        k = msvcrt.getch()
        if k == "H": k = "up"
        elif k == "P": k = "down"
        elif k == "K": k = "left"
        elif k == "M": k = "right"
        elif k == "G": k = "home"
        elif k == "O": k = "end"
        elif k == "R": k = "insert"
        elif k == "I": k = "pgup"
        elif k == "Q": k = "pgdn"
        elif k == "S": k = "delete"

    # Fix weird linebreak
    if k == "\r":
        k = "\n"

    return k


def actualGetKeys():
    while True:
        k = getKey()
        keyPress.PressKey(k)
        keyPress.ReleaseKey(k)

def getKeys():
    p = threading.Thread(target=actualGetKeys)
    p.daemon = True
    p.start()

我将其存储在名为keyGet.py的文件中。

这一切都运作良好，但每当用户按下回车键时，屏幕上不会显示第一个键。控制台仍然知道你键入它，它只是没有出现在那里。像这样：

发生了什么事？我尝试过很多东西，似乎无法改变这种行为。

我现在能够实现这一点，因为它可以在脚本运行时异步捕获键输入，并使用您在命令提示符中键入的每个命令的文本执行（因此您可以，例如，存储这些到一个数组）。我遇到的唯一问题是这样的：

我知道这是因为基本上必须让机器人在输入后重新键入输入，我只是想知道是否有办法这样做可以防止输入在机器人输入时实际显示，所以它的行为就像用户期望的那样。

Answer 1

这是由此产生的代码，基本上是由eryksun的评论写的，因为不知怎的，他知道所有。

这称为readcmd.py

# Some if this is from http://nullege.com/codes/show/src@e@i@einstein-HEAD@Python25Einstein@Lib@subprocess.py/380/win32api.GetStdHandle
# and
# http://nullege.com/codes/show/src@v@i@VistA-HEAD@Python@Pexpect@winpexpect.py/901/win32console.GetStdHandle.PeekConsoleInput

from ctypes import *
import time
import threading

from win32api import STD_INPUT_HANDLE, STD_OUTPUT_HANDLE

from win32console import GetStdHandle, KEY_EVENT, ENABLE_WINDOW_INPUT, ENABLE_MOUSE_INPUT, ENABLE_ECHO_INPUT, ENABLE_LINE_INPUT, ENABLE_PROCESSED_INPUT

import keyPress


class CaptureLines():
    def __init__(self):
        self.stopLock = threading.Lock()

        self.isCapturingInputLines = False

        self.inputLinesHookCallback = CFUNCTYPE(c_int)(self.inputLinesHook)
        self.pyosInputHookPointer = c_void_p.in_dll(pythonapi, "PyOS_InputHook")
        self.originalPyOsInputHookPointerValue = self.pyosInputHookPointer.value

        self.readHandle = GetStdHandle(STD_INPUT_HANDLE)
        self.readHandle.SetConsoleMode(ENABLE_LINE_INPUT|ENABLE_ECHO_INPUT|ENABLE_PROCESSED_INPUT)

    def inputLinesHook(self):

        self.readHandle.SetConsoleMode(ENABLE_LINE_INPUT|ENABLE_ECHO_INPUT|ENABLE_PROCESSED_INPUT)
        inputChars = self.readHandle.ReadConsole(10000000)
        self.readHandle.SetConsoleMode(ENABLE_LINE_INPUT|ENABLE_PROCESSED_INPUT)

        if inputChars == "\r\n":
            keyPress.KeyPress("\n")
            return 0

        inputChars = inputChars[:-2]

        inputChars += "\n"

        for c in inputChars:
            keyPress.KeyPress(c)

        self.inputCallback(inputChars)

        return 0


    def startCapture(self, inputCallback):
        self.stopLock.acquire()

        try:
            if self.isCapturingInputLines:
                raise Exception("Already capturing keystrokes")

            self.isCapturingInputLines = True
            self.inputCallback = inputCallback

            self.pyosInputHookPointer.value = cast(self.inputLinesHookCallback, c_void_p).value
        except Exception as e:
            self.stopLock.release()
            raise

        self.stopLock.release()

    def stopCapture(self):
        self.stopLock.acquire()

        try:
            if not self.isCapturingInputLines:
                raise Exception("Keystrokes already aren't being captured")

            self.readHandle.SetConsoleMode(ENABLE_LINE_INPUT|ENABLE_ECHO_INPUT|ENABLE_PROCESSED_INPUT)

            self.isCapturingInputLines = False
            self.pyosInputHookPointer.value = self.originalPyOsInputHookPointerValue

        except Exception as e:
            self.stopLock.release()
            raise

        self.stopLock.release()

这是keyPress.py

# Modified from http://stackoverflow.com/a/13615802/2924421

import ctypes
from ctypes import wintypes
import time

user32 = ctypes.WinDLL('user32', use_last_error=True)

INPUT_MOUSE    = 0
INPUT_KEYBOARD = 1
INPUT_HARDWARE = 2

KEYEVENTF_EXTENDEDKEY = 0x0001
KEYEVENTF_KEYUP       = 0x0002
KEYEVENTF_UNICODE     = 0x0004
KEYEVENTF_SCANCODE    = 0x0008

MAPVK_VK_TO_VSC = 0

# C struct definitions
wintypes.ULONG_PTR = wintypes.WPARAM

SendInput = ctypes.windll.user32.SendInput

PUL = ctypes.POINTER(ctypes.c_ulong)

class KEYBDINPUT(ctypes.Structure):
    _fields_ = (("wVk",         wintypes.WORD),
                ("wScan",       wintypes.WORD),
                ("dwFlags",     wintypes.DWORD),
                ("time",        wintypes.DWORD),
                ("dwExtraInfo", wintypes.ULONG_PTR))

class MOUSEINPUT(ctypes.Structure):
    _fields_ = (("dx",          wintypes.LONG),
                ("dy",          wintypes.LONG),
                ("mouseData",   wintypes.DWORD),
                ("dwFlags",     wintypes.DWORD),
                ("time",        wintypes.DWORD),
                ("dwExtraInfo", wintypes.ULONG_PTR))

class HARDWAREINPUT(ctypes.Structure):
    _fields_ = (("uMsg",    wintypes.DWORD),
                ("wParamL", wintypes.WORD),
                ("wParamH", wintypes.WORD))

class INPUT(ctypes.Structure):
    class _INPUT(ctypes.Union):
        _fields_ = (("ki", KEYBDINPUT),
                    ("mi", MOUSEINPUT),
                    ("hi", HARDWAREINPUT))
    _anonymous_ = ("_input",)
    _fields_ = (("type",   wintypes.DWORD),
                ("_input", _INPUT))

LPINPUT = ctypes.POINTER(INPUT)

def _check_count(result, func, args):
    if result == 0:
        raise ctypes.WinError(ctypes.get_last_error())
    return args

user32.SendInput.errcheck = _check_count
user32.SendInput.argtypes = (wintypes.UINT, # nInputs
                             LPINPUT,       # pInputs
                             ctypes.c_int)  # cbSize

def KeyDown(unicodeKey):
    key, unikey, uniflag = GetKeyCode(unicodeKey)
    x = INPUT( type=INPUT_KEYBOARD, ki= KEYBDINPUT( key, unikey, uniflag, 0))
    user32.SendInput(1, ctypes.byref(x), ctypes.sizeof(x))

def KeyUp(unicodeKey):
    key, unikey, uniflag = GetKeyCode(unicodeKey)
    extra = ctypes.c_ulong(0)
    x = INPUT( type=INPUT_KEYBOARD, ki= KEYBDINPUT( key, unikey, uniflag | KEYEVENTF_KEYUP, 0))
    user32.SendInput(1, ctypes.byref(x), ctypes.sizeof(x))

def KeyPress(unicodeKey):
    time.sleep(0.0001)
    KeyDown(unicodeKey)
    time.sleep(0.0001)
    KeyUp(unicodeKey)
    time.sleep(0.0001)


def GetKeyCode(unicodeKey):
    k = unicodeKey
    curKeyCode = 0
    if k == "up": curKeyCode = 0x26
    elif k == "down": curKeyCode = 0x28
    elif k == "left": curKeyCode = 0x25
    elif k == "right": curKeyCode = 0x27
    elif k == "home": curKeyCode = 0x24
    elif k == "end": curKeyCode = 0x23
    elif k == "insert": curKeyCode = 0x2D
    elif k == "pgup": curKeyCode = 0x21
    elif k == "pgdn": curKeyCode = 0x22
    elif k == "delete": curKeyCode = 0x2E
    elif k == "\n": curKeyCode = 0x0D

    if curKeyCode == 0:
        return 0, int(unicodeKey.encode("hex"), 16), KEYEVENTF_UNICODE
    else:
        return curKeyCode, 0, 0

Python中单独线程中的键回显不显示第一个键击

1 个答案: