我无法正常使用WAMP，因为当我点击wampserver / mysql / StartResume服务时，MySQL服务都没有启动。
请注意：
我还能尝试什么？
我是WAMP的新手。
这是 my.ini ：
# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is C:\mysql\data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /tmp/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
[wampmysqld]
port = 3306
socket = /tmp/mysql.sock
key_buffer_size = 16M
max_allowed_packet = 1M
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
basedir=c:/wamp/bin/mysql/mysql5.6.17
log-error=c:/wamp/logs/mysql.log
datadir=c:/wamp/bin/mysql/mysql5.6.17/data
lc-messages-dir=c:/wamp/bin/mysql/mysql5.6.17/share
#innodb_force_recovery = 1
# Change your locale here !
lc-messages=fr_FR
# Avoid warning
explicit_defaults_for_timestamp = TRUE
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
# Disable Federated by default
skip-federated
# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin
# binary logging format - mixed recommended
binlog_format=mixed
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
# New for MySQL 5.6 if no slave
skip-slave-start
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Point the following paths to different dedicated disks
#tmpdir = /tmp/
#log-update = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\mysql\data/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\mysql\data/
#innodb_log_arch_dir = C:\mysql\data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
[mysqld]
port=3306
explicit_defaults_for_timestamp = TRUE
答案 0 :(得分：2)
在你的问题中你说： -
我可以使用MySQL控制台查看我的所有数据库*
当我浏览http://localhost/phpmyadmin时，PhpMyAdmin正常工作*
在这种情况下，MySQL 必须正在运行
这让我觉得你的系统上运行了第二个MySQL服务器。
MySQL可以作为其他一些工具/应用程序的一部分安装。如果是这种情况，他们通常将服务名称设置为MYSQL并将其设置为启动automatically，以便它可能在您启动WAMPServer之前运行，从而阻止端口3306. WAMPServer MySQL实例被调用wampmysqld（如果运行64位WAMPSever，则为wampmysqld64）。使用services.msc管理单元查看正在运行的服务。
WINDOWS KEY + R
enter services.msc
Press the OK button
您只需要一个MYSQL服务器来为许多数据库提供服务，因此您需要决定要使用哪个数据库。如果您决定删除非WAMPServer MySQL，那么在删除旧MySQL之前不要忘记备份数据库
答案 1 :(得分：0)
好的，我在网上进行了一些研究，并提到你需要做以下事情：
搜索mysql-bin.index文件，删除它，然后重启MySQL
答案 2 :(得分：0)
在我的情况下，问题是MySQL的其他多个实例。我已经从Oracle安装了MySQL Workbench。事实证明，我一次只能运行一个MySQL服务。
答案 3 :(得分：0)
这个解决方案帮助了我：
答案 4 :(得分：0)
我在安装新的Wamp 3.1.9时遇到了完全相同的问题。 data中缺少mysql5.7.26目录。一种快速修复是从bin目录：mysqld --initialize-insecure
答案 5 :(得分：-1)
这对我有用