过去几天我在Scicoslab遇到了一个难以理解的问题
我一直在为C中的scicos编写一些通信块（将数据发送到外部应用程序），然后用它自己的代码包装它们。问题是，即使代码正常工作（我已经检查了每个输出），scicos也会给出这条错误消息：sicosim: error. Type 0 not yet supported by outtb. Error Screenshot
以下是Sensor Dispatcher Block的c函数代码：
int bro_sens_send (scicos_block *block)
{
int rc, i;
bro_fist_t packet[BUFFER_SIZE];
for (i = 1; i < block->nin; i++) {
bro_encode_sci_datablock(&packet[i-1], block->inptr[i]);
};
printf ("Data for first block: %i, %i, %.2f\n", packet[0].port, packet[0].operation, packet[0].data);
rc = send(block->inptr[0][0], packet, sizeof(bro_fist_t) * BUFFER_SIZE, 0);
if (rc < 0)
{
perror("send() failed");
return -1;
}
printf("%d bytes of data were sent\n", rc);
return 0;
}
int bro_sens_read (scicos_block *block)
{
int rc, i;
bro_fist_t packet[BUFFER_SIZE];
rc = recv(block->inptr[0][0], packet, sizeof(bro_fist_t) * BUFFER_SIZE, 0);
printf("%d bytes of data were received\n", rc);
if (rc < 0)
{
perror("recv() failed");
return -1;
}
printf("Starting to set outputs :3 [%i]\n", block->nout);
for (i = 0; i < block->nout; i++) {
printf("Next Step defining outputs :D [%i]\n", i);
bro_decode_sci_datablock(&packet[i], &block->outptr[i][0]);
printf("Output value for port %i is: %.2f[%i]\n", i, block->outptr[i][0], block->outsz[(2*block->nout)+i]);
}
return 0;
}
void bro_comm_sens_disp (scicos_block *block, int flag)
{
switch (flag) {
case 1: /* set output */
bro_sens_send(block);
bro_sens_read(block);
break;
case 2: /* get input */
break;
case 4: /* initialisation */
break;
case 5: /* ending */
break;
default:
break;
}
}
这是块定义的代码（在scilab代码中）：
function [x,y,typ] = SENS_Disp(job,arg1,arg2)
x=[];y=[];typ=[];
select job
case 'plot' then
exprs=arg1.graphics.exprs;
standard_draw(arg1)
case 'getinputs' then
[x,y,typ]=standard_inputs(arg1)
case 'getoutputs' then
[x,y,typ]=standard_outputs(arg1)
case 'getorigin' then
[x,y]=standard_origin(arg1)
case 'set' then
x=arg1
model=arg1.model;graphics=arg1.graphics;
exprs=graphics.exprs;
case 'define' then
model = scicos_model()
model.sim = list('bro_comm_sens_disp',4)
model.out = [1;1;1;1;1;1;1]
model.out2 = [1;1;1;1;1;1;1]
model.outtyp= [1;1;1;1;1;1;1]
model.in = [1;3;3;3;3;3;3;3]
model.in2 = [1;1;1;1;1;1;1;1]
model.intyp = [3;1;1;1;1;1;1;1]
model.evtin = []
model.rpar = []
model.ipar = []
model.dstate=[1];
model.blocktype='c'
model.dep_ut=[%t %f]
exprs=[]
gr_i=['xstringb(orig(1),orig(2),[''Sensors'';+''Dispatcher''],sz(1),sz(2),''fill'');']
x=standard_define([3 2],model,exprs,gr_i)
end
endfunction
块的第一个inpput端口是用于通信的套接字描述符，而其他七个连接到设置块。输出返回从外部应用程序接收的数据。
我试图浏览Scilab代码，我知道我得到的错误告诉我数据的类型设置错误，但我已经检查过，情况并非如此。
以下是输出错误的Scicoslab代码：
/*set vectors of outtb*/
for (j=0; j<nlnk; j++) { /*for each link*/
subheader=(int *)(listentry(il_state_outtb,j+1)); /*get header of outtbl(j+1)*/
outtbsz[j]=subheader[1]; /*store dimensions*/
outtbsz[j+nlnk]=subheader[2];
switch (subheader[0]) { /*store type and address*/
/*matrix of double*/
case 1 :
switch (subheader[3]) {
case 0 :
outtbtyp[j]=SCSREAL_N; /*double real matrix*/
outtbptr[j]=(SCSREAL_COP *)(subheader+4);
break;
case 1 :
outtbtyp[j]=SCSCOMPLEX_N; /*double complex matrix*/
outtbptr[j]=(SCSCOMPLEX_COP *)(subheader+4);
break;
default :
Scierror(888,\
"%s : error. Type %d of double scalar matrix not yet supported "
"for outtb.\n",\
fname,subheader[3]);
FREE(outtbptr);
FREE(outtbtyp);
FREE(outtbsz);
FREE(opar);
FREE(oparsz);
FREE(opartyp);
FREE(oz);
FREE(ozsz);
FREE(oztyp);
FREE(lfunpt);
freeparam;
FREE(outtb_elem);
break;
}
break;
/*matrix of integers*/
case 8 :
switch (subheader[3]) {
case 1 :
outtbtyp[j]=SCSINT8_N; /*int8*/
outtbptr[j]=(SCSINT8_COP *)(subheader+4);
break;
case 2 :
outtbtyp[j]=SCSINT16_N; /*int16*/
outtbptr[j]=(SCSINT16_COP *)(subheader+4);
break;
case 4 :
outtbtyp[j]=SCSINT32_N; /*int32*/
outtbptr[j]=(SCSINT32_COP *)(subheader+4);
break;
case 11 :
outtbtyp[j]=SCSUINT8_N; /*uint8*/
outtbptr[j]=(SCSUINT8_COP *)(subheader+4);
break;
case 12 :
outtbtyp[j]=SCSUINT16_N; /*uint16*/
outtbptr[j]=(SCSUINT16_COP *)(subheader+4);
break;
case 14 :
outtbtyp[j]=SCSUINT32_N; /*uint32*/
outtbptr[j]=(SCSUINT32_COP *)(subheader+4);
break;
default :
Scierror(888,\
"%s : error. Type %d of integer scalar matrix not yet supported "
"for outtb.\n",\
fname,subheader[3]);
FREE(outtbptr);
FREE(outtbtyp);
FREE(outtbsz);
FREE(opar);
FREE(oparsz);
FREE(opartyp);
FREE(oz);
FREE(ozsz);
FREE(oztyp);
FREE(lfunpt);
freeparam;
FREE(outtb_elem);
break;
}
break;
default :
Scierror(888,"%s : error. Type %d not yet supported for outtb.\n",fname,subheader[0]);
FREE(outtbptr);
FREE(outtbtyp);
FREE(outtbsz);
FREE(opar);
FREE(oparsz);
FREE(opartyp);
FREE(oz);
FREE(ozsz);
FREE(oztyp);
FREE(lfunpt);
freeparam;
FREE(outtb_elem);
return 0;
break;
}
答案 0 :(得分：0)
确定。经过很多时间我已经解决了这个问题。有一个函数在错误的内存空间中设置一个值。问题是没有任何错误消息或警告。 问题在于这样做的功能：
block->outptr[0][3] = 0;
在只有3个输出端口的块中。这在数据注册表中写入了错误的数据。删除后，一切正常。