问题是当我选择一个表时，它会显示此错误＆＃34;表xxx.xxx不存在于引擎中，但表存在。
我将XAMPP 4.6.XX更新为5.6.14，所以我的数据库在Mysql中（我不知道是在InnoDB或MyISAM中），嗯....我试图用MYSQL安装旧版本但是不起作用。
解决方案是什么？
我不想删除表格并再次创建，因此我丢失数据而我不想要这个。
PhpMyadmin向我显示的信息就是这个;
# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /Applications/XAMPP/xamppfiles/var/mysql) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients [client]
#password = your_password port = 3306 socket = /Applications/XAMPP/xamppfiles/var/mysql/mysql.sock
# Here follows entries for some specific programs
# The MySQL server [mysqld] user = mysql port=3306 socket = /Applications/XAMPP/xamppfiles/var/mysql/mysql.sock skip-external-locking key_buffer = 16M max_allowed_packet = 1M table_open_cache = 64 sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M
# Where do all the plugins live plugin_dir = /Applications/XAMPP/xamppfiles/lib/mysql/plugin/
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
# commented in by xampp security
#skip-networking skip-networking
# Replication Master Server (default)
# binary logging is required for replication
# log-bin deactivated by default since XAMPP 1.4.11
#log-bin=mysql-bin
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted server-id = 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Point the following paths to different dedicated disks tmpdir = /Applications/XAMPP/xamppfiles/temp/mysql
#log-update = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000
# Comment the following if you are using InnoDB tables
#skip-innodb innodb_data_home_dir = /Applications/XAMPP/xamppfiles/var/mysql/ innodb_data_file_path = ibdata1:10M:autoextend innodb_log_group_home_dir = /Applications/XAMPP/xamppfiles/var/mysql/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high innodb_buffer_pool_size = 16M
# Deprecated in 5.6
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 1 innodb_lock_wait_timeout = 50
[mysqldump] quick max_allowed_packet = 16M
[mysql] no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[isamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M
[myisamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M
[mysqlhotcopy] interactive-timeout
!include /Applications/XAMPP/xamppfiles/mysql/my.cnf
和my.cnf
from myprogram.h:2,
from myprogram.cpp:1:
我正在寻找更多信息，表格已损坏，我是对的吗？有可能在不丢失数据的情
编辑：我尝试使用＆＃34; REPAIR TABLE表;＆＃34;并且它失败并显示相同的消息＆＃34;表格不存在于引擎＆＃34;如果创建一个数据库和表，它可以工作，但对我来说，它不是解决方案，因为我丢失了信息。