在C#中,我遇到了启动画面的问题。当需要关闭并显示主Form1时,它会移动到Form1的右上角。它然后消失了。我以前从来没有这样做过,并且几乎没有想法来修复它。我希望启动画面在中心屏幕上消失,而不是移动到开场Form1的上角。这是代码:
public Form1() {
Splash mySplash = new Splash();
mySplash.TotalValue = 7; //or however many steps you must complete
mySplash.Show();
mySplash.Update();
InitializeComponent();
//--<begin>--------------
this.Hide();
this.WindowState = FormWindowState.Normal;
mySplash.Progress++;
printDoc.PrintPage += new PrintPageEventHandler(printDoc_PrintPage);
printBOM.PrintPage += new PrintPageEventHandler(printBOM_PrintPage);
printList.PrintPage += new PrintPageEventHandler(printList_PrintPage);
mySplash.Progress++;
// using old Kodak Imaging OCX !
axImgEdit1.Image = "\\\\Netstore\\eng_share\\EView\\BOB-eView9.tif";
axImgEdit1.DisplayScaleAlgorithm =
ImgeditLibCtl.DisplayScaleConstants.wiScaleOptimize;
axImgEdit1.FitTo(0);
axImgEdit1.Display();
mySplash.Progress++;
//~~~~~~~~~~~~~~~~~~~~Getting printer info~~~~~~~~~~~~~~~~~~~~~~~~~
List<Win32_Printer> printerList = Win32_Printer.GetList();
int i = 0;
foreach (Win32_Printer printer in printerList) {
prnName = printer.Name;
prnPort = printer.PortName;
prnDriver = printer.DriverName;
if (i == 0) {
prnNameString = prnName;
prnDriverString = prnDriver;
prnPortString = prnPort;
}
else {
prnNameString += "," + prnName;
prnDriverString += "," + prnDriver;
prnPortString += "," + prnPort;
}
i++;
}
mySplash.Progress++;
EViewMethods.defaultPrn[0] = Settings.Default.DefaultPrinter; //defaultPrn[] is
//string array holding the default printer name, driver and port
EViewMethods.defaultPrn[1] = Settings.Default.DefaultPrinterDriver;
EViewMethods.defaultPrn[2] = Settings.Default.DefaultPrinterPort;
//making this printer the system default printer
object printerName = Settings.Default.DefaultPrinter;
ManagementObjectSearcher searcher = new ManagementObjectSearcher("SELECT * FROM
Win32_Printer");
ManagementObjectCollection collection = searcher.Get();
foreach (ManagementObject currentObject in collection) {
if (currentObject["name"].ToString() == printerName.ToString()) {
currentObject.InvokeMethod("SetDefaultPrinter", new object[] { printerName
});
}
}
mySplash.Progress++;
EViewMethods.reCenterEVafterDwgClose = Settings.Default.ReCenterEVafterDwgClose;
if (Settings.Default.ReCenterEVafterDwgClose == true)
recenterEViewAfterDrawingViewerClosesToolStripMenuItem.Checked = true;
else
recenterEViewAfterDrawingViewerClosesToolStripMenuItem.Checked = false;
//-------------------------------------------------------
EViewMethods.screenBehavior = Settings.Default.ViewStyle;
normalToolStripMenuItem.Checked = false;
clearViewToolStripMenuItem.Checked = false;
clearviewDULevLRToolStripMenuItem.Checked = false;
clearviewdULevLLToolStripMenuItem.Checked = false;
clearviewdURevULToolStripMenuItem.Checked = false;
clearviewdURevLLToolStripMenuItem.Checked = false;
clearviewdURevLRToolStripMenuItem.Checked = false;
smallScreenToolStripMenuItem.Checked = false;
switch (EViewMethods.screenBehavior) {
case "Normal":
normalToolStripMenuItem.Checked = true;
Settings.Default.FormViewDwgLocation = new Point(0, 0);
//Settings.Default.FormEviewLocation = new
//Point(EViewMethods.form1CenterLeft, EViewMethods.form1CenterTop);
Settings.Default.FormEviewLocation = new Point(588, 312);
Settings.Default.FormECNLocation = new Point(EViewMethods.formECNLeft,
EViewMethods.formECNTop);
//EViewMethods.reCenterEVafterDwgClose = false;
Form1.ActiveForm.SetDesktopLocation(588, 312);
break;
case "Clearview-dULevUR":
clearViewToolStripMenuItem.Checked = true;
Settings.Default.FormViewDwgLocation = new Point(0, 0);
Settings.Default.FormEviewLocation = new Point(1180, 0);
Settings.Default.FormECNLocation = new Point(EViewMethods.formECNLeft,
EViewMethods.formECNTop);
//EViewMethods.reCenterEVafterDwgClose = true;
Form1.ActiveForm.SetDesktopLocation(588, 312);
break;
case "Clearview-dULevLR":
clearviewDULevLRToolStripMenuItem.Checked = true;
Settings.Default.FormViewDwgLocation = new Point(0, 0);
Settings.Default.FormEviewLocation = new Point(1180, 622);
Settings.Default.FormECNLocation = new Point(EViewMethods.formECNLeft,
EViewMethods.formECNTop);
//EViewMethods.reCenterEVafterDwgClose = true;
Form1.ActiveForm.SetDesktopLocation(588, 312);
break;
case "Clearview-dULevLL":
clearviewdULevLLToolStripMenuItem.Checked = true;
Settings.Default.FormViewDwgLocation = new Point(0, 0);
Settings.Default.FormEviewLocation = new Point(0, 622);
Settings.Default.FormECNLocation = new Point(EViewMethods.formECNLeft,
EViewMethods.formECNTop);
//EViewMethods.reCenterEVafterDwgClose = true;
Form1.ActiveForm.SetDesktopLocation(588, 312);
break;
case "Clearview-dURevUL":
clearviewdURevULToolStripMenuItem.Checked = true;
Settings.Default.FormViewDwgLocation = new Point(825, 0);
Settings.Default.FormEviewLocation = new Point(0, 0);
Settings.Default.FormECNLocation = new Point(EViewMethods.formECNLeft,
EViewMethods.formECNTop);
//EViewMethods.reCenterEVafterDwgClose = true;
Form1.ActiveForm.SetDesktopLocation(588, 312);
break;
case "Clearview-dURevLL":
clearviewdURevLLToolStripMenuItem.Checked = true;
Settings.Default.FormViewDwgLocation = new Point(825, 0);
Settings.Default.FormEviewLocation = new Point(0, 622);
Settings.Default.FormECNLocation = new Point(EViewMethods.formECNLeft,
EViewMethods.formECNTop);
//EViewMethods.reCenterEVafterDwgClose = true;
Form1.ActiveForm.SetDesktopLocation(588, 312);
break;
case "Clearview-dURevLR":
clearviewdURevLRToolStripMenuItem.Checked = true;
Settings.Default.FormViewDwgLocation = new Point(825, 0);
Settings.Default.FormEviewLocation = new Point(1180, 622);
Settings.Default.FormECNLocation = new Point(EViewMethods.formECNLeft,
EViewMethods.formECNTop);
//EViewMethods.reCenterEVafterDwgClose = true;
Form1.ActiveForm.SetDesktopLocation(588, 312);
break;
case "Small-screen":
//clearviewdURevLRToolStripMenuItem.Checked = true;
smallScreenToolStripMenuItem.Checked = true;
Settings.Default.FormViewDwgLocation = new Point(0, 0);
Settings.Default.FormEviewLocation = new Point(0, 0);
Settings.Default.FormECNLocation = new Point(0, 0);
//EViewMethods.reCenterEVafterDwgClose = true;
Form1.ActiveForm.SetDesktopLocation(588, 312);
break;
}
//Form1.ActiveForm.SetDesktopLocation(588, 312); //all screen behavior mode will
//begin centered on the screen
EViewMethods.eviewUserPrefLocation = Settings.Default.FormEviewLocation;
//-------------------------------------------------------
EViewMethods.syncListToDwgNum = Settings.Default.SyncListDwgNum;
if (EViewMethods.syncListToDwgNum == true)
synchronizeListToActiveDwgToolStripMenuItem.Checked = true;
else
synchronizeListToActiveDwgToolStripMenuItem.Checked = false;
toolStripStatusLabel1.Text = "";
toolStripStatusLabel2.Text = Settings.Default.ViewStyle;
toolStripStatusLabel3.Text = Settings.Default.DefaultPrinter;
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~
Assembly asm = Assembly.GetExecutingAssembly();
AssemblyName asmName = asm.GetName();
EViewMethods.eviewVersion = asmName.Version.ToString();
radioPartInfo.Checked = true;
disableAllSearch();
EViewMethods.userName = Environment.UserName;
EViewMethods.openConnection();
mySplash.Progress++;
EViewMethods.loadFavorites(listFavorites);
mySplash.Close();
mySplash.Dispose();
this.Show();
this.ActiveControl = comboEntry;
}
更多精简列表仅显示更相关的代码:
public Form1() {
Splash mySplash = new Splash();
mySplash.TotalValue = 7; //or however many steps you must complete
mySplash.Show();
mySplash.Update();
InitializeComponent();
//--<begin>--------------
this.Hide();
this.WindowState = FormWindowState.Normal;
mySplash.Progress++;
...
mySplash.Progress++;
...
mySplash.Progress++;
//~~~~~~~~~~~~~~~~~~~~Getting printer info~~~~~~~~~~~~~~~~~~~~~~~~~
List<Win32_Printer> printerList = Win32_Printer.GetList();
...
mySplash.Progress++;
...
mySplash.Progress++;
EViewMethods.reCenterEVafterDwgClose = Settings.Default.ReCenterEVafterDwgClose;
if (Settings.Default.ReCenterEVafterDwgClose == true)
recenterEViewAfterDrawingViewerClosesToolStripMenuItem.Checked = true;
else
recenterEViewAfterDrawingViewerClosesToolStripMenuItem.Checked = false;
//-------------------------------------------------------
EViewMethods.screenBehavior = Settings.Default.ViewStyle;
...
//Form1.ActiveForm.SetDesktopLocation(588, 312); //all screen behavior mode will
begin centered on the screen
EViewMethods.eviewUserPrefLocation = Settings.Default.FormEviewLocation;
//-------------------------------------------------------
EViewMethods.openConnection();
mySplash.Progress++;
...
mySplash.Close();
mySplash.Dispose();
this.Show();
this.ActiveControl = comboEntry;
}
Splash代码:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using System.Reflection;
using System.Threading;
namespace EView2 {
public partial class Splash : Form {
static int total = 100;
static int currPos = 0;
static string text;
// Threading
static Splash ms_frmSplash = null;
static Thread ms_oThread = null;
public Splash() {
InitializeComponent();
this.labelVersion.Text =
Assembly.GetExecutingAssembly().GetName().Version.ToString();
}
public int TotalValue {
get {
return total;
}
set {
total = value;
progressBar1.Maximum = total;
}
}
public int Progress {
get {
return currPos;
}
set {
currPos = value;
try {
progressBar1.Value = currPos;
}
catch {
}
}
}
static public void ShowSplashScreen() {
// Make sure it's only launched once.
if (ms_frmSplash != null)
return;
ms_oThread = new Thread(new ThreadStart(Splash.ShowForm));
ms_oThread.IsBackground = true;
ms_oThread.Start();
}
// A property returning the splash screen instance
static public Splash SplashForm {
get {
return ms_frmSplash;
}
}
// A private entry point for the thread.
static private void ShowForm() {
ms_frmSplash = new Splash();
Application.Run(ms_frmSplash);
}
答案 0 :(得分:1)
我从多线程的东西中看到,看起来你试图让启动画面更顺畅地运行,并且可能会遇到关于从创建它的不同线程更新表单属性的错误。
方法:
- 调用(看起来像复杂的代码但真的没那么糟)
- 启动线程中的250ms计时器,它从实例变量/属性(hackish)获取命令
因此,无论如何,进度条必须设法更新自己。如果你遇到麻烦,你总是可以在进度设置器中输入me.refresh。或更新pb之后的doevents,实际上只应该在有任何可见窗体没有可能引发可能在其上处理的事件(例如,点击)的可见窗体时使用,因为这将导致重入。
但那不是你问的问题。抱歉。要解决这个没有重写的问题,请在关闭/处理启动之前添加此代码
MySplash.Visible = False
System.Windows.Forms.Application.DoEvents
请原谅我,如果我无法测试它来证明它,我缺少一个最简单的 - 减少案例的screnario,它表明了加载和测试的问题(提示 - 在发布代码时始终这样做,50%的当你发现这个bug的时候,另外50%你实际上会让人们给你答案,因为许多人不会阅读过去2个代码屏幕)。我也不承诺不会导致应用程序出现在屏幕上的另一个窗口下出现问题,但你也没有问过这个问题; - )