Vagrant:OS X Yosemite中的远程连接断开连接

时间:2015-03-31 15:15:36

标签: ruby-on-rails ruby vagrant virtualbox osx-yosemite

我计划在此框中使用vagrant测试Ruby on Rails项目:https://atlas.hashicorp.com/nickcharlton/boxes/ruby-box

目标是在主机的浏览器中查看应用程序。

首先,我已将我的虚拟箱更新为4.3.26和我的流浪汉。

通过关注http://docs.vagrantup.com/v2/networking/basic_usage.html,我试过了 config.vm.network "forwarded_port", guest: 3000, host: 3000config.vm.network "private_network", ip: "192.168.33.10。 实际上,我可以从主机的终端ping“192.168.33.10”。但是在浏览器中,我无法从localhost:3000或127.0.0.1:3000或192.168.33.10或其他网址组合到达来宾。

rails应用程序应该在guest虚拟机内正常工作,因为从bundle install进程到rails s没有任何问题。

我总是可以启动虚拟机并通过ssh登录,但是,我无法访问Firefox或Safari中的应用程序。那是我注意到无尽的Warning: Remote connection disconnect. Retrying...

老实说,我不明白为什么经过一些重复的消息后会出现==> default: Machine booted and ready!并且即使在这种情况下,流浪汉ssh也能正常工作。

我已经尝试了很多方法来解决这个问题。

  1. Vagrant stuck connection timeout retrying
  2. 我尝试在VagrantFile中添加“vb.gui = true”,但它没有用完。

    1. http://laravel.io/forum/05-27-2014-laravel-homestead-not-connecting-when-wifi-is-enabled
    2. 我已经尝试更改我的DNS了,我已经尝试断开我的wifi,但是他们没有用完。

      Vagrantfile如下所示:

      # -*- mode: ruby -*-
      # vi: set ft=ruby :
      
      # All Vagrant configuration is done below. The "2" in Vagrant.configure
      # configures the configuration version (we support older styles for
      # backwards compatibility). Please don't change it unless you know what
      # you're doing.
      Vagrant.configure(2) do |config|
        # The most common configuration options are documented and commented below.
        # For a complete reference, please see the online documentation at
        # https://docs.vagrantup.com.
      
        # Every Vagrant development environment requires a box. You can search for
        # boxes at https://atlas.hashicorp.com/search.
        config.vm.box = "nickcharlton/ruby-box"
      
        # Disable automatic box update checking. If you disable this, then
        # boxes will only be checked for updates when the user runs
        # `vagrant box outdated`. This is not recommended.
        # config.vm.box_check_update = false
      
        # Create a forwarded port mapping which allows access to a specific port
        # within the machine from a port on the host machine. In the example below,
        # accessing "localhost:8080" will access port 80 on the guest machine.
        # config.vm.network "forwarded_port", guest: 80, host: 8080
        config.vm.network "forwarded_port", guest: 3000, host: 3000
      
        # Create a private network, which allows host-only access to the machine
        # using a specific IP.
        # config.vm.network "private_network", ip: "192.168.33.10"
      
        # Create a public network, which generally matched to bridged network.
        # Bridged networks make the machine appear as another physical device on
        # your network.
        # config.vm.network "public_network"
      
        # Share an additional folder to the guest VM. The first argument is
        # the path on the host to the actual folder. The second argument is
        # the path on the guest to mount the folder. And the optional third
        # argument is a set of non-required options.
        # config.vm.synced_folder "../data", "/vagrant_data"
      
        # Provider-specific configuration so you can fine-tune various
        # backing providers for Vagrant. These expose provider-specific options.
        # Example for VirtualBox:
        #
         config.vm.provider "virtualbox" do |vb|
        #   # Display the VirtualBox GUI when booting the machine
           vb.gui = true
        #
        #   # Customize the amount of memory on the VM:
        #   vb.memory = "1024"
         end
        #
        # View the documentation for the provider you are using for more
        # information on available options.
      
        # Define a Vagrant Push strategy for pushing to Atlas. Other push strategies
        # such as FTP and Heroku are also available. See the documentation at
        # https://docs.vagrantup.com/v2/push/atlas.html for more information.
        # config.push.define "atlas" do |push|
        #   push.app = "YOUR_ATLAS_USERNAME/YOUR_APPLICATION_NAME"
        # end
      
        # Enable provisioning with a shell script. Additional provisioners such as
        # Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the
        # documentation for more information about their specific syntax and use.
        # config.vm.provision "shell", inline: <<-SHELL
        #   sudo apt-get update
        #   sudo apt-get install -y apache2
        # SHELL
      end
      

0 个答案:

没有答案