我正在尝试在vim中使用python-jedi，但目前它完全无法使用，因为它试图在奇数时间完成编码。
我添加了以下行：
let g:jedi#popup_on_dot = 0
到我的vimrc文件，确实在“。”上停止了自动完成。但是当我尝试在逗号后添加空格到以下代码时：
upper_blue = np.array([130,255,255])
自动完成不断弹出，似乎每当我在方括号内时，它与阵列无关。
我安装了pymode但是我确实关闭了绳子功能......我承认我不知道如何完全关闭pymode。
的vimrc：
" Better command-line completion
set wildmenu
" Show partial commands in the last line of the screen
set showcmd
" Highlight searches (use <C-L> to temporarily turn off highlighting; see the
" mapping of <C-L> below)
set hlsearch
" Modelines have historically been a source of security vulnerabilities. As
" such, it may be a good idea to disable them and use the securemodelines
" script, <http://www.vim.org/scripts/script.php?script_id=1876>.
" set nomodeline
"------------------------------------------------------------
" Usability options {{{1
"
" These are options that users frequently set in their .vimrc. Some of them
" change Vim's behaviour in ways which deviate from the true Vi way, but
" which are considered to add usability. Which, if any, of these options to
" use is very much a personal preference, but they are harmless.
" Use case insensitive search, except when using capital letters
set ignorecase
set smartcase
" Allow backspacing over autoindent, line breaks and start of insert action
set backspace=indent,eol,start
" When opening a new line and no filetype-specific indenting is enabled, keep
" the same indent as the line you're currently on. Useful for READMEs, etc.
set autoindent
" Stop certain movements from always going to the first character of a line.
" While this behaviour deviates from that of Vi, it does what most users
" coming from other editors would expect.
set nostartofline
" Display the cursor position on the last line of the screen or in the status
" line of a window
set ruler
" Always display the status line, even if only one window is displayed
set laststatus=2
" Instead of failing a command because of unsaved changes, instead raise a
" dialogue asking if you wish to save changed files.
set confirm
" Use visual bell instead of beeping when doing something wrong
set visualbell
" And reset the terminal code for the visual bell. If visualbell is set, and
" this line is also included, vim will neither flash nor beep. If visualbell
" is unset, this does nothing.
set t_vb=
" Enable use of the mouse for all modes
set mouse=a
" Set the command window height to 2 lines, to avoid many cases of having to
" "press <Enter> to continue"
set cmdheight=2
" Display line numbers on the left
set number
" Quickly time out on keycodes, but never time out on mappings
set notimeout ttimeout ttimeoutlen=200
" Use <F11> to toggle between 'paste' and 'nopaste'
set pastetoggle=<F11>
"------------------------------------------------------------
" Indentation options {{{1
"
" Indentation settings according to personal preference.
" Indentation settings for using 2 spaces instead of tabs.
" Do not change 'tabstop' from its default value of 8 with this setup.
set shiftwidth=2
set softtabstop=2
set expandtab
" Indentation settings for using hard tabs for indent. Display tabs as
" two characters wide.
"set shiftwidth=2
"set tabstop=2
"------------------------------------------------------------
" Mappings {{{1
"
" Useful mappings
" Map Y to act like D and C, i.e. to yank until EOL, rather than act as yy,
" which is the default
map Y y$
map <F2> :NERDTreeToggle<CR>
" Map <C-L> (redraw screen) to also turn off search highlighting until the
" next search
nnoremap <C-L> :nohl<CR><C-L>
execute pathogen#infect()
au FileType html compiler html
au QuickFixCmdPost make cwindow
"------------------------------------------------------------
"----Python Vim---"
"let g:pymode_rope = 0
" Documentation
"let g:pymode_doc = 1
"let g:pymode_doc_key = 'K'
"
" "Linting
"let g:pymode_lint = 1
"let g:pymode_lint_checker = "pyflakes,pep8"
" " Auto check on save
"let g:pymode_lint_write = 1
"
" " Support virtualenv
"let g:pymode_virtualenv = 0
"
" " Enable breakpoints plugin
"let g:pymode_breakpoint = 1
"let g:pymode_breakpoint_key = '<leader>b'
"
" " syntax highlighting
"let g:pymode_syntax = 0
"let g:pymode_syntax_all = 0
"let g:pymode_syntax_indent_errors = g:pymode_syntax_all
"let g:pymode_syntax_space_errors = g:pymode_syntax_all
set rtp+=~/.vim/bundle/Vundle.vim
call vundle#begin()
" let Vundle manage Vundle, required
Plugin 'gmarik/Vundle.vim'
Plugin 'Lokaltog/powerline', {'rtp': 'powerline/bindings/vim/'}
Plugin 'tpope/vim-fugitive'
Plugin 'scrooloose/nerdtree'
" Bundle 'klen/python-mode'
Plugin 'davidhalter/jedi-vim'
Plugin 'altercation/vim-colors-solarized'
call vundle#end() " required
filetype plugin indent on " required
"jedi"
let g:jedi#popup_on_dot = 0
let g:jedi#auto_initialization = 1
"---PowerLine--"
set guifont=DejaVu\ Sans\ Mono\ for\ Powerline\ 9
set laststatus=2
"--Look and feel--"
if has('gui_running')
set background=light
else
set background=dark
endif
答案 0 :(得分：3)
使用此：
let g:jedi#completions_enabled = 0
答案 1 :(得分：1)
非常确定jedi-vim开始自动完成的唯一时间是.。其他一切都可能是另一个插件的错（可能supertab或类似autocomplpop）。
jedi-vim还包装 Ctrl Space 。但是，这不应该导致任何问题（除非您正在使用该命令。
答案 2 :(得分：0)
如jedi-vim readme中所述，在有一个点时禁用自动补全就足够了。我看到OP在他的~/.vimrc中已经出现了这个问题（问题中）：
let g:jedi#popup_on_dot = 0
This answer对一个类似的问题提到了auto-complete manual，它有几种策略可以关闭自动填充功能，并可以使用多种组合键将其重新打开。
更新：答案的这一部分与如何在启用jedi-vim的情况下复制粘贴有关。
此外，Jedi-vim issue 211建议使用vim的pastetoggle模式。 Vimwiki在paste with autoindent上的页面提到了如何为pastetoggle设置快捷方式。甚至还有一个名为vim-bracketed-paste的插件，可以在“支持包围式粘贴模式的xterm兼容终端仿真器”中自动检测粘贴。