我决定在使用双启动chrubuntu / chromeos后，在我的XE303C12基于ARM的三星chromebook上安装Arch Linux。我按照这里的说明进行操作：https://wiki.archlinux.org/index.php/Samsung_Chromebook_%28ARM%29
我成功地将未经验证的u-boot闪存到SPI闪存，并使用arch linux内核和archlinuxarm.org上的rootfs替换内部SSD上的所有内容，如下所示： http://archlinuxarm.org/platforms/armv7/samsung/samsung-chromebook#qt-platform_tabs-ui-tabs2
在使用u-boot提示符后，我的系统成功启动到SSD上的arch linux。 但是，我无法建立无线连接。
ip link show
仅列出＆＃34; lo＆＃34 ;; mlan0尚未创建。
以下是dmesg输出的一部分（字符限制赢了，让我发布整个内容）：
[ 1.607858] exynos-mdev.0: Media0[0xed90f400] was registered successfully
[ 1.609608] exynos-mdev.1: Media1[0xed90f800] was registered successfully
[ 1.611336] exynos-mdev.2: Media2[0xed90fc00] was registered successfully
[ 1.613231] ntc-thermistor ncp15wb473.0: Thermistor ncp15wb473:0 (type: ncp15wb473/0) successfully probed.
[ 1.614968] ntc-thermistor ncp15wb473.1: Thermistor ncp15wb473:1 (type: ncp15wb473/0) successfully probed.
[ 1.616682] ntc-thermistor ncp15wb473.2: Thermistor ncp15wb473:2 (type: ncp15wb473/0) successfully probed.
[ 1.618371] ntc-thermistor ncp15wb473.3: Thermistor ncp15wb473:3 (type: ncp15wb473/0) successfully probed.
[ 1.620387] Exynos: Kernel Thermal management registered
[ 1.622023] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[ 1.623837] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[ 1.625756] device-mapper: uevent: version 1.0.3
[ 1.627601] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.629409] device-mapper: verity-chromeos: dm-verity-chromeos registered
[ 1.631129] device-mapper: bootcache: version 0.1.0 loaded
[ 1.632892] cpuidle: using governor ladder
[ 1.634605] cpuidle: using governor menu
[ 1.636229] sdhci: Secure Digital Host Controller Interface driver
[ 1.637907] sdhci: Copyright(c) Pierre Ossman
[ 1.639546] Synopsys Designware Multimedia Card Interface Driver
[ 1.639711] dw_mmc dw_mmc.0: Using internal DMA controller.
[ 1.643026] dw_mmc dw_mmc.0: Version ID is 241a
[ 1.644765] dw_mmc dw_mmc.0: DW MMC controller at irq 107, 32 bit host data width, 128 deep fifo
[ 1.646609] dw_mmc dw_mmc.0: wp gpio not available
[ 1.646669] mmc0: no vmmc regulator found
[ 1.647488] usb 1-2: new high-speed USB device number 2 using s5p-ehci
[ 1.650172] s5p-ehci s5p-ehci: s5p_hub_control:70 resetting HSIC port phys DONE
[ 1.654423] dw_mmc dw_mmc.2: Using internal DMA controller.
[ 1.656088] dw_mmc dw_mmc.2: Version ID is 241a
[ 1.657870] dw_mmc dw_mmc.2: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
[ 1.659670] mmc1: no vmmc regulator found
[ 1.662559] dw_mmc dw_mmc.3: Using internal DMA controller.
[ 1.664312] dw_mmc dw_mmc.3: Version ID is 241a
[ 1.666132] dw_mmc dw_mmc.3: DW MMC controller at irq 110, 32 bit host data width, 128 deep fifo
[ 1.668001] dw_mmc dw_mmc.3: wp gpio not available
[ 1.668047] dw_mmc dw_mmc.3: cd gpio not available
[ 1.669773] mmc2: no vmmc regulator found
[ 1.674320] usbcore: registered new interface driver usbhid
[ 1.676002] usbhid: USB HID core driver
[ 1.679362] max98095 7-0011: Failed to reset DSP: -6
[ 1.681294] max98095 7-0011: Failure reading hardware revision: -1
[ 1.683017] max98095 7-0011: asoc: failed to probe CODEC max98095.7-0011: -1
[ 1.684736] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 784314Hz, actual 781250HZ div = 64)
[ 1.686522] asoc: failed to instantiate card DAISY-I2S: -1
[ 1.688404] Netfilter messages via NETLINK v0.30.
[ 1.691202] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.695446] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.697279] arp_tables: (C) 2002 David S. Miller
[ 1.699080] TCP: cubic registered
[ 1.701034] NET: Registered protocol family 10
[ 1.703174] NET: Registered protocol family 17
[ 1.706215] sctp: Hash tables configured (established 43690 bind 52428)
[ 1.708191] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 1.709989] ThumbEE CPU extension supported.
[ 1.711809] Registering SWP/SWPB emulation handler
[ 1.714729] s5p-mfc s5p-mfc-v6: start latency exceeded, new value 1000 ns
[ 1.716547] s5p-mfc s5p-mfc-v6: state save latency exceeded, new value 11458 ns
[ 1.718360] s5p-mfc s5p-mfc-v6: stop latency exceeded, new value 625 ns
[ 1.720129] s5p-sysmmu s5p-sysmmu.4: start latency exceeded, new value 875 ns
[ 1.721893] s5p-sysmmu s5p-sysmmu.4: state save latency exceeded, new value 3833 ns
[ 1.723665] s5p-sysmmu s5p-sysmmu.4: stop latency exceeded, new value 584 ns
[ 1.727513] VDD_INT Voltage table set with 7 Group
[ 1.729251] VDD_MIF Voltage table set with 0 Group
[ 1.731139] s5p-sysmmu s5p-sysmmu.3: start latency exceeded, new value 1500 ns
[ 1.732930] s5p-sysmmu s5p-sysmmu.3: state save latency exceeded, new value 4250 ns
[ 1.734697] s5p-sysmmu s5p-sysmmu.3: stop latency exceeded, new value 583 ns
[ 1.736522] exynos-gsc exynos-gsc.3: start latency exceeded, new value 1375 ns
[ 1.738306] exynos-gsc exynos-gsc.3: state save latency exceeded, new value 2791 ns
[ 1.740067] exynos-gsc exynos-gsc.3: stop latency exceeded, new value 625 ns
[ 1.741821] exynos-gsc exynos-gsc.2: start latency exceeded, new value 792 ns
[ 1.743584] exynos-gsc exynos-gsc.2: state save latency exceeded, new value 2541 ns
[ 1.745324] exynos-gsc exynos-gsc.2: stop latency exceeded, new value 625 ns
[ 1.747129] exynos-gsc exynos-gsc.1: start latency exceeded, new value 875 ns
[ 1.748881] exynos-gsc exynos-gsc.1: state save latency exceeded, new value 2583 ns
[ 1.750605] exynos-gsc exynos-gsc.1: stop latency exceeded, new value 583 ns
[ 1.752348] registered taskstats version 1
[ 1.754111] exynos-gsc exynos-gsc.0: start latency exceeded, new value 875 ns
[ 1.755828] exynos-gsc exynos-gsc.0: state save latency exceeded, new value 2542 ns
[ 1.757555] exynos-gsc exynos-gsc.0: stop latency exceeded, new value 625 ns
[ 1.759265] s5p-sysmmu s5p-sysmmu.26: start latency exceeded, new value 833 ns
[ 1.760994] s5p-sysmmu s5p-sysmmu.26: state save latency exceeded, new value 5916 ns
[ 1.762726] s5p-sysmmu s5p-sysmmu.26: stop latency exceeded, new value 583 ns
[ 1.764417] s5p-sysmmu s5p-sysmmu.25: start latency exceeded, new value 791 ns
[ 1.766140] s5p-sysmmu s5p-sysmmu.25: state save latency exceeded, new value 5916 ns
[ 1.767899] s5p-sysmmu s5p-sysmmu.25: stop latency exceeded, new value 584 ns
[ 1.769629] s5p-sysmmu s5p-sysmmu.24: start latency exceeded, new value 1292 ns
[ 1.771355] s5p-sysmmu s5p-sysmmu.24: state save latency exceeded, new value 5459 ns
[ 1.773104] s5p-sysmmu s5p-sysmmu.24: stop latency exceeded, new value 1125 ns
[ 1.773114] enp32khz: incomplete constraints, leaving on
[ 1.774838] s5p-sysmmu s5p-sysmmu.23: start latency exceeded, new value 750 ns
[ 1.778292] s5p-sysmmu s5p-sysmmu.23: state save latency exceeded, new value 11625 ns
[ 1.780018] s5p-sysmmu s5p-sysmmu.23: stop latency exceeded, new value 708 ns
[ 1.780039] en32khz_cp: incomplete constraints, leaving on
[ 1.781817] en32khz_ap: incomplete constraints, leaving on
[ 1.785164] usb 1-2: New USB device found, idVendor=0424, idProduct=3503
[ 1.786831] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.788648] vdd_int: incomplete constraints, leaving on
[ 1.790439] hub 1-2:1.0: USB hub found
[ 1.790535] vdd_arm: incomplete constraints, leaving on
[ 1.791013] gpio_set_debounce: gpio-165 status -22
[ 1.791038] gpio_set_debounce: gpio-185 status -22
[ 1.791109] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[ 1.791788] input: gpio-keys.7 as /devices/gpio-keys.7/input/input2
[ 1.792740] mmc0: new high speed DDR MMC card at address 0001
[ 1.793042] mmcblk0: mmc0:0001 SEM16G 14.6 GiB
[ 1.793171] mmcblk0boot0: mmc0:0001 SEM16G partition 1 2.00 MiB
[ 1.793294] mmcblk0boot1: mmc0:0001 SEM16G partition 2 2.00 MiB
[ 1.793479] hub 1-2:1.0: 3 ports detected
[ 1.802590] cyapa: LID device: 'gpio-keys.7' connected
[ 1.808099] mmcblk0: p1 p2
[ 1.812604] mmcblk0boot1: unknown partition table
[ 1.815608] mmcblk0boot0: unknown partition table
[ 1.827830] rtc-max77686 max77686-rtc: setting system clock to 2014-11-28 03:21:35 UTC (1417144895)
[ 1.829538] VDD_ARM : L0, 1200000 uV
[ 1.831224] VDD_ARM : L1, 1162500 uV
[ 1.832911] VDD_ARM : L2, 1112500 uV
[ 1.834545] VDD_ARM : L3, 1075000 uV
[ 1.836153] VDD_ARM : L4, 1050000 uV
[ 1.837754] VDD_ARM : L5, 1012500 uV
[ 1.839316] VDD_ARM : L6, 987500 uV
[ 1.840856] VDD_ARM : L7, 962500 uV
[ 1.842372] VDD_ARM : L8, 937500 uV
[ 1.843887] VDD_ARM : L9, 925000 uV
[ 1.845360] VDD_ARM : L10, 900000 uV
[ 1.846813] VDD_ARM : L11, 900000 uV
[ 1.848245] VDD_ARM : L12, 900000 uV
[ 1.849625] VDD_ARM : L13, 900000 uV
[ 1.850987] VDD_ARM : L14, 900000 uV
[ 1.852320] VDD_ARM : L15, 900000 uV
[ 1.853666] mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 784314Hz, actual 781250HZ div = 64)
[ 1.855168] NOT Capping CPU0 frequency
[ 1.856621] cpufreq_interactive: monitoring input on chromeos-ec-i2c
[ 1.859051] cpufreq_interactive: monitoring input on Cypress APA Trackpad (cyapa)
[ 1.862486] ALSA device list:
[ 1.863873] No soundcards found.
[ 1.871006] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.872490] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 1.874820] devtmpfs: mounted
[ 1.876421] Freeing init memory: 288K
[ 1.882183] mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 50000000Hz, actual 50000000HZ div = 1)
[ 1.888002] mmc2: new high speed SDIO card at address 0001
[ 2.077677] usb 1-2.2: new high-speed USB device number 3 using s5p-ehci
[ 2.168816] systemd[1]: systemd 217 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN )
[ 2.195639] systemd[1]: Detected architecture 'arm'.
[ 2.215721] systemd[1]: Inserted module 'autofs4'
[ 2.218120] systemd[1]: Set hostname to <alarm>.
[ 2.261983] usb 1-2.2: New USB device found, idVendor=2232, idProduct=1037
[ 2.263572] usb 1-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.265090] usb 1-2.2: Product: WebCam SC-03FFM12339N
[ 2.266588] usb 1-2.2: Manufacturer: Generic
[ 2.268132] usb 1-2.2: SerialNumber: 200901010001
[ 2.375968] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 2.379217] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.381051] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.382783] systemd[1]: Starting Remote File Systems.
[ 2.386682] systemd[1]: Reached target Remote File Systems.
[ 2.388427] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 2.392599] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.394462] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.396432] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.398373] systemd[1]: Starting Paths.
[ 2.402638] systemd[1]: Reached target Paths.
[ 2.404588] systemd[1]: Starting Encrypted Volumes.
[ 2.408968] systemd[1]: Reached target Encrypted Volumes.
[ 2.410995] systemd[1]: Starting Swap.
[ 2.415525] systemd[1]: Reached target Swap.
[ 2.417635] systemd[1]: Starting Root Slice.
[ 2.440477] systemd[1]: Created slice Root Slice.
[ 2.442547] systemd[1]: Starting User and Session Slice.
[ 2.447764] systemd[1]: Created slice User and Session Slice.
[ 2.449806] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 2.454437] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.456484] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.461419] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.463501] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.468030] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.469992] systemd[1]: Starting Journal Socket (/dev/log).
[ 2.474273] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.476189] systemd[1]: Starting udev Control Socket.
[ 2.480522] systemd[1]: Listening on udev Control Socket.
[ 2.482484] systemd[1]: Starting udev Kernel Socket.
[ 2.486794] systemd[1]: Listening on udev Kernel Socket.
[ 2.488746] systemd[1]: Starting LVM2 metadata daemon socket.
[ 2.493100] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.495079] systemd[1]: Starting Journal Socket.
[ 2.499305] systemd[1]: Listening on Journal Socket.
[ 2.501174] systemd[1]: Starting System Slice.
[ 2.505969] systemd[1]: Created slice System Slice.
[ 2.507813] systemd[1]: Starting system-getty.slice.
[ 2.512563] systemd[1]: Created slice system-getty.slice.
[ 2.515561] systemd[1]: Started Load Kernel Modules.
[ 2.517298] systemd[1]: Starting udev Coldplug all Devices...
[ 2.538637] systemd[1]: Started Set Up Additional Binary Formats.
[ 2.540539] systemd[1]: Mounted Configuration File System.
[ 2.542389] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.597844] systemd[1]: Starting Apply Kernel Variables...
[ 2.647828] systemd[1]: Starting Setup Virtual Console...
[ 2.692909] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.752802] systemd[1]: Mounted FUSE Control File System.
[ 2.756466] systemd[1]: Mounted Huge Pages File System.
[ 2.760106] systemd[1]: Mounting Debug File System...
[ 2.802760] systemd[1]: Starting Journal Service...
[ 2.862961] systemd[1]: Starting Slices.
[ 2.871376] systemd[1]: Reached target Slices.
[ 2.874693] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.927903] systemd[1]: Mounting Temporary Directory...
[ 2.986596] systemd[1]: Mounted Debug File System.
[ 2.990647] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.139951] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.179860] systemd[1]: Started Apply Kernel Variables.
[ 3.224836] systemd[1]: Started Setup Virtual Console.
[ 3.289819] systemd[1]: Started Remount Root and Kernel File Systems.
[ 3.294353] systemd[1]: Mounted Temporary Directory.
[ 3.352266] systemd[1]: Started udev Coldplug all Devices.
[ 3.362806] systemd[1]: Started Journal Service.
[ 3.767678] systemd-journald[121]: Received request to flush runtime journal from PID 1
[ 3.955174] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[ 3.957272] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[ 4.092868] Bluetooth: Core ver 2.16
[ 4.094773] NET: Registered protocol family 31
[ 4.096184] cfg80211: Calling CRDA to update world regulatory domain
[ 4.096606] Bluetooth: HCI device and connection manager initialized
[ 4.100348] Bluetooth: HCI socket layer initialized
[ 4.102338] Bluetooth: L2CAP socket layer initialized
[ 4.104439] Bluetooth: SCO socket layer initialized
[ 4.136034] industrialio: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.140745] Bluetooth: vendor=0x2df, device=0x912a, class=255, fn=2
[ 4.150380] uvcvideo: Found UVC 1.00 device WebCam SC-03FFM12339N (2232:1037)
[ 4.153883] isl29018: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.160270] s5p-mfc s5p-mfc-v6: state restore latency exceeded, new value 1458 ns
[ 4.162314] s5p-mfc s5p-mfc-v6: stop latency exceeded, new value 833 ns
[ 4.164524] s5p-sysmmu s5p-sysmmu.4: state restore latency exceeded, new value 8000 ns
[ 4.166543] s5p-sysmmu s5p-sysmmu.4: stop latency exceeded, new value 708 ns
[ 4.168971] s5p-sysmmu s5p-sysmmu.3: state restore latency exceeded, new value 6667 ns
[ 4.171019] s5p-sysmmu s5p-sysmmu.3: stop latency exceeded, new value 709 ns
[ 4.173651] input: WebCam SC-03FFM12339N as /devices/s5p-ehci/usb1/1-2/1-2.2/1-2.2:1.0/input/input3
[ 4.176805] usbcore: registered new interface driver uvcvideo
[ 4.178824] USB Video Class driver (1.1.1)
[ 4.286038] sbs-battery 4-000b: sbs-battery: battery gas gauge device registered
[ 4.288155] i2c-core: driver [sbs-battery] using legacy suspend method
[ 4.699776] netlink: 12 bytes leftover after parsing attributes.
[ 4.701645] netlink: 12 bytes leftover after parsing attributes.
[ 4.710445] netlink: 12 bytes leftover after parsing attributes.
[ 4.949498] netlink: 12 bytes leftover after parsing attributes.
[ 4.951280] netlink: 12 bytes leftover after parsing attributes.
[ 4.953064] netlink: 12 bytes leftover after parsing attributes.
[ 35.858710] netlink: 20 bytes leftover after parsing attributes.
[ 35.861808] netlink: 20 bytes leftover after parsing attributes.
[ 35.864968] netlink: 20 bytes leftover after parsing attributes.
[ 64.648157] mwifiex_sdio mmc2:0001:1: Failed to get firmware mrvl/sd8797_uapsta.bin
[ 64.662412] Bluetooth: request_firmware(firmware) failed, error code = -2
[ 64.662928] s5p_mfc_load_firmware:92: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ 64.662956] s5p-mfc s5p-mfc-v6: stop latency exceeded, new value 958 ns
[ 64.662997] s5p-sysmmu s5p-sysmmu.4: start latency exceeded, new value 959 ns
[ 64.663013] s5p-sysmmu s5p-sysmmu.4: state save latency exceeded, new value 4708 ns
[ 64.663025] s5p-sysmmu s5p-sysmmu.4: stop latency exceeded, new value 709 ns
[ 64.663043] s5p-sysmmu s5p-sysmmu.3: state save latency exceeded, new value 5208 ns
[ 64.663054] s5p-sysmmu s5p-sysmmu.3: stop latency exceeded, new value 750 ns
[ 64.665289] Bluetooth: Failed to download firmware!
[ 64.665820] s5p-sysmmu s5p-sysmmu.4: state restore latency exceeded, new value 8958 ns
[ 64.688390] Bluetooth: Downloading firmware failed!
[ 107.212639] usb 1-1: new high-speed USB device number 4 using s5p-ehci
[ 107.350866] usb 1-1: New USB device found, idVendor=0951, idProduct=1625
[ 107.360898] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 107.370961] usb 1-1: Product: DT 101 II
[ 107.374259] usb 1-1: Manufacturer: Kingston
[ 107.377391] usb 1-1: SerialNumber: 001372982955F9A186760E05
[ 107.381506] scsi0 : usb-storage 1-1:1.0
[ 107.392162] usbcore: registered new interface driver uas
[ 108.384887] scsi 0:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 108.400442] sd 0:0:0:0: [sda] 3913664 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 108.413391] sd 0:0:0:0: [sda] Write Protect is off
[ 108.414722] sd 0:0:0:0: [sda] Mode Sense: 16 25 09 51
[ 108.415261] sd 0:0:0:0: [sda] Incomplete mode parameter data
[ 108.416597] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 108.420884] sd 0:0:0:0: [sda] Incomplete mode parameter data
[ 108.422269] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 108.424299] sda: sda1
[ 108.428013] sd 0:0:0:0: [sda] Incomplete mode parameter data
[ 108.429339] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 108.430615] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 117.588871] EXT4-fs (sda1): recovery complete
[ 117.591537] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 125.607903] s5p_mfc_load_firmware:92: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ 125.615713] s5p-mfc s5p-mfc-v6: stop latency exceeded, new value 1250 ns
[ 125.619540] s5p-sysmmu s5p-sysmmu.4: stop latency exceeded, new value 792 ns
[ 125.623354] s5p-sysmmu s5p-sysmmu.4: state save latency exceeded, new value 4917 ns
[ 125.627072] s5p-sysmmu s5p-sysmmu.4: stop latency exceeded, new value 875 ns
[ 125.630803] s5p-sysmmu s5p-sysmmu.3: state save latency exceeded, new value 6458 ns
[ 125.634707] s5p-sysmmu s5p-sysmmu.3: stop latency exceeded, new value 1000 ns
这看起来是相关部分：
[ 64.648157] mwifiex_sdio mmc2:0001:1: Failed to get firmware mrvl/sd8797_uapsta.bin
sd8797_uapsta.bin确实存在于/lib/firmware/mvrl/sd8797_uapsta.bin
我不知道mwifiex_sdio驱动程序是如何工作的，谷歌搜索似乎只是让我走进了兔子洞。我提到我确实设法在sd卡的双启动环境中使用网络连接来运行arch（使用上面第二个链接的指令），但那是在我将nv_uboot闪存到SPI闪存之前。据我所知，SPI闪存中签名的u-boot之前加载了一个驻留在SD卡上的未经验证的u-boot，后者又加载了arch内核。使用我根据上面第一个链接设置的系统，SPI闪存中的nv_uboot直接加载内核而无需中间引导加载程序。我最好的猜测是，这个中间阶段的某些东西被忽略了，不应该是。
来自lsblk的输出以获得良好的衡量标准：
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 1 1.9G 0 disk
-sda1 8:1 1 1.9G 0 part /mnt
mmcblk0boot0 179:16 0 2M 1 disk
mmcblk0boot1 179:32 0 2M 1 disk
mmcblk0 179:0 0 14.7G 0 disk
|-mmcblk0p1 179:1 0 16M 0 part
-mmcblk0p2 179:2 0 14.7G 0 part /
mmcblk0p1包含arch内核
mmcblk0p2是rootfs
那么有没有人有任何调试这个系统的建议？如何确保mwifiex_sdio找到其固件？
对不起，如果我不够冗长，那是我第一次在这里发帖。如果您需要查看更多输出，请告诉我，我会发布它们。
答案 0 :(得分：2)
systemd存在问题。内核现在负责加载固件，但是Arch Linux Arm仍然停留在无法加载固件的内核3.4上，但在升级systemd后它也无法升级固件。
将systemd systemd-sysvcompat和libsystemd添加到/etc/pacman.conf中的IgnorePackages并从回滚重新安装systemd-216。