Question

我正在尝试从python客户端向服务器发送和接收C结构数据，反之亦然。客户端和服务器在连接和交换数据时都能顺利运行。客户端向服务器发送ctype结构，服务器再次将其发送回去。问题是我不知道如何解释客户端收到的消息，并以结构格式提取数据。我的最终想法是让python服务器和C-client相互通信并以预定义的结构交换数据。

以下是我在Python中为客户端和服务器提供的代码：

客户代码

import socket
import sys
import time

from ctypes import *

class payload_t(Structure):
    _fields_ = [("ms", c_ulong),
                ("counter", c_ulong),
                ("DHT_temperature", c_float),
                ("DHT_humidity", c_float),
                ("DS_temperature", c_float),
                ("temperature_setpoint", c_float),
                ("time_setpoint", c_float)]

# Create a TCP/IP socket
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)

# Connect the socket to the port where the server is listening
server_address = ('localhost', 10000)
print >>sys.stderr, 'connecting to %s port %s' % server_address
sock.connect(server_address)

try:
    for i in range(0,10):
        # Send data
        payload=payload_t(i*1000,i+1,25.2,45.7,25.8,33.22,3600.0)
        message = payload
        # 'This is the message.  It will be repeated.'
        print 'length of message %d' % sizeof(message)
        print 'sending "', message.ms, message.counter, message.DHT_temperature, message.DHT_humidity, message.DS_temperature, message.temperature_setpoint, message.time_setpoint, '"'
        sock.sendall(message)
        # time.sleep(0.1)
        # Look for the response
        amount_received = 0
        amount_expected = sizeof(message)

        while amount_received < amount_expected:
            datap = sock.recv(sizeof(message))
            amount_received += len(datap)
        print >>sys.stderr, 'received "%s"' % datap
        print type(datap)
        payload=payload_t()
        datap.readinto(payload)
        data=datap.readinto(payload_t)
        data=struct.unpack(payload_t,datap)
            print 'Received "', data.ms, data.counter, data.DHT_temperature, data.DHT_humidity, data.DS_temperature, data.temperature_setpoint, data.time_setpoint, '"'

finally:
    print >>sys.stderr, 'closing socket'
    sock.close()

服务器代码

import socket
import sys
from ctypes import *

class payload_t(Structure):
    _fields_ = [("ms", c_ulong),
                ("counter", c_ulong),
                ("DHT_temperature", c_float),
                ("DHT_humidity", c_float),
                ("DS_temperature", c_float),
                ("temperature_setpoint", c_float),
                ("time_setpoint", c_float)]

# Create a TCP/IP socket
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)

# Bind the socket to the port
server_address = ('localhost', 10000)
print >>sys.stderr, 'starting up on %s port %s' % server_address
sock.bind(server_address)

# Listen for incoming connections
sock.listen(1)
payload=payload_t(0,0,0.0,0.0,0.0,0.0,0.0)
while True:
    # Wait for a connection
    print >>sys.stderr, 'waiting for a connection'
    connection, client_address = sock.accept()

    try:
        print >>sys.stderr, 'connection from', client_address

        # Receive the data in small chunks and retransmit it
        while True:
            data = connection.recv(sizeof(payload))
            print >>sys.stderr, 'received "%s"' % data
            if data:
                print >>sys.stderr, 'sending data back to the client'
                connection.sendall(data)
            else:
                print >>sys.stderr, 'no more data from', client_address
                break

    finally:
        # Clean up the connection
        connection.close()

Answer 1

首先，您正在转储收到的数据。您在每次循环迭代中重新分配变量'datap'。

做一些类似的事情：

datap += sock.recv(sizeof(message) - amount_received)

（当然，这不是最有效的代码，但你明白了。）

当您在'datap'var中组装结构时，可以使用'from_buffer'或'from_buffer_copy'方法将其加载到ctype类中。

payload = payload_t.from_buffer_copy(datap)

后者在您的情况下更好，因为重新绑定'datap'var时，您的缓冲区可能会消失。

Answer 2

如何通过调用recv_into提供ctypes.Structure的实例呢？

这是服务器代码的修改版本，希望我没有删除您要保留的功能

AddScoped

因此，基本上，我所做的唯一一件事就是使用socket.recv_in直接调用结构的实例： https://docs.python.org/3/library/socket.html#socket.recv_into

这使我以后可以直接访问结构属性。

我猜它的结构足够小（28个八位位组），这样数据就可以放在单个recv_into调用中。如果您需要多次调用recv_into来构建完整的结构，那么...

如果您使用python 3.7，则可以使用切片memoryviews对结构进行多次调用：

import socket
import sys
from ctypes import *

class payload_t(Structure):
    _fields_ = [("ms", c_ulong),
                ("counter", c_ulong),
                ("DHT_temperature", c_float),
                ("DHT_humidity", c_float),
                ("DS_temperature", c_float),
                ("temperature_setpoint", c_float),
                ("time_setpoint", c_float)]

# Create a TCP/IP socket
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)

# Bind the socket to the port
server_address = ('localhost', 10000)
print >>sys.stderr, 'starting up on %s port %s' % server_address
sock.bind(server_address)

# Listen for incoming connections
sock.listen(1)
payload=payload_t()
while True:
    # Wait for a connection
    print >>sys.stderr, 'waiting for a connection'
    connection, client_address = sock.accept()

    try:
        print >>sys.stderr, 'connection from', client_address

        # Receive the data in small chunks and retransmit it
        while True:
            data = connection.recv_into(payload)
            print >>sys.stderr, 'received "%s"' % data
            if data:
                print >>sys.stderr, 'sending data back to the client'
                print >>sys.stderr, 'time_setpoint "%f"' % payload.time_setpoint
                connection.sendall(payload)
            else:
                print >>sys.stderr, 'no more data from', client_address
                break

    finally:
        # Clean up the connection
        connection.close()

没有任何东西可以保证诚实。使用早期版本的Python，尝试在memoryview上强制转换为“ B”时可能会出现异常。回想一下ctypes上的memoryview.Structure是0-dim，那么在没有强制转换的情况下将其切片几乎是不可能的...

使用python和ctype结构通过套接字发送/接收数据

2 个答案: