Question

目前，在Python可以与设备通信之前，python程序必须知道设备（Arduino）所在的端口。

问题：每当设备拔出并重新插入时，其COM端口都会发生变化，因此必须再次向Python提供正确的串口才能找到该设备。

Python（使用pySerial）如何自动搜索要使用的正确串口？ python是否可以将串口上的设备正确识别为Arduino？

Answer 1

使用以下代码查看所有可用的串行端口：

import serial.tools.list_ports
ports = list(serial.tools.list_ports.comports())
for p in ports:
    print p

这给了我以下内容：

('COM4', 'Arduino Due Programming Port (COM4)', 'USB VID:PID=2341:003D SNR=75330303035351300230')
('COM11', 'RS-232 Port (COM11)', 'FTDIBUS\\VID_0856+PID_AC27+BBOPYNPPA\\0000')

如果它是Arduino，你可以做类似的事情：

    if "Arduino" in p[1]:
        print "This is an Arduino!"

Answer 2

使用serial.tools.list_ports.comports，我们可以找到并连接到arduino：

import warnings
import serial
import serial.tools.list_ports

arduino_ports = [
    p.device
    for p in serial.tools.list_ports.comports()
    if 'Arduino' in p.description  # may need tweaking to match new arduinos
]
if not arduino_ports:
    raise IOError("No Arduino found")
if len(arduino_ports) > 1:
    warnings.warn('Multiple Arduinos found - using the first')

ser = serial.Serial(arduino_ports[0])

如果您知道每次都在寻找完全相同的arduino，则可以p.serial_number过滤

import serial.tools.list_ports

def find_arduino(serial_number):
    for pinfo in serial.tools.list_ports.comports():
        if pinfo.serial_number == serial_number:
            return serial.Serial(pinfo.device)
    raise IOError("Could not find an arduino - is it plugged in?")

ser = find_arduino(serial_number='85430353531351B09121')

Answer 3

"""
Written on a Windows 10 Computer, Python 2.7.9 Version.

This program automatically detects and lists ports.  If no ports are found, it simply shells out.  In the printout below "list(serial.tools.list_ports.comports())" finds two ports and the program lists them out - a listout shown below:

     COM5 - USB-SERIAL CH340 (COM5)
     Found Arduino Uno on COM5
     COM4 - Microsoft USB GPS Port (COM4)

As each port is found, "CH340," (the name of the Adruino Uno) is searched for in the listed port with the "while int1 < 9:" loop.  The first "If" statement looks for "CH340" and when found the integer value "int1" will be the same as the com port #. With a concatination,  the operation "str1 = "COM" + str2" gives the com port name of the Adruino, eg. "COM5."  The next "IF" statement looks for both "CH340" AND str1, ("COM5") in the above case.  The statement "Found Arduino Uno on COM5" prints out, and "str1" is used in setting up the com port:

ser = serial.Serial(str1, 9600, timeout=10)

This program goes on to open the com port and prints data from the Adruino.

The modules "serial, sys, time, serial.tools.list_ports" must all be imported.

Written by Joseph F. Mack 01/29/2016.  "A BIG Thank you" to all the individuals whose programs I "borrowed" from that are available in the many forums for Python and PYGame users!
"""

import serial
import sys
import time
import serial.tools.list_ports

serPort = ""
int1 = 0
str1 = ""
str2 = ""

# Find Live Ports
ports = list(serial.tools.list_ports.comports())
for p in ports:
   print p # This causes each port's information to be printed out.
           # To search this p data, use p[1].

   while int1 < 9:   # Loop checks "COM0" to "COM8" for Adruino Port Info. 

      if "CH340" in p[1]:  # Looks for "CH340" in P[1].
            str2 = str(int1) # Converts an Integer to a String, allowing:
            str1 = "COM" + str2 # add the strings together.

      if "CH340" in p[1] and str1 in p[1]: # Looks for "CH340" and "COM#"
         print "Found Arduino Uno on " + str1
         int1 = 9 # Causes loop to end.

      if int1 == 8:
         print "UNO not found!"
         sys.exit() # Terminates Script.

      int1 = int1 + 1

time.sleep(5)  # Gives user 5 seconds to view Port information -- can be   changed/removed.

# Set Port
ser = serial.Serial(str1, 9600, timeout=10) # Put in your speed and timeout value.

# This begins the opening and printout of data from the Adruino.

ser.close()  # In case the port is already open this closes it.
ser.open()   # Reopen the port.

ser.flushInput()
ser.flushOutput()

int1 = 0
str1 = ""
str2 = ""

while int1==0:

   if "\n" not in str1:        # concatinates string on one line till a line feed "\n"
      str2 = ser.readline()    # is found, then prints the line.
      str1 += str2
   print(str1)
   str1=""
   time.sleep(.1)

print 'serial closed'
ser.close()

Answer 4

尝试以下代码（仅适用于Windows用户。MAC用户可以从此概念中撤消想法）

import serial
import time
list=['COM1','COM2','COM3','COM4','COM5','COM6','COM7','COM8','COM9','COM10','COM11','COM12','COM13','COM14','COM15','COM16','COM17','COM18',]



COM1='COM1'
COM2='COM2'
COM3='COM3'
COM4='COM4'
COM5='COM5'
COM6='COM6'
COM7='COM7'
COM8='COM8'
COM9='COM9'
COM10='COM10'
COM11='COM11'
COM12='COM12'
COM13='COM13'
COM14='COM14'
COM15='COM15'
COM16='COM16'
COM17='COM17'
COM18='COM18'
COM19='COM19'
time.sleep(1)
ser = serial.Serial()

ser.baudrate = 9600

i=1

while True:
    time.sleep(.2)
    print(i)
    ser.port = list[i]
    try:

        ser.open()
        if ser.isOpen()==True:
            print('connected')
            #print('arduino is on COMPORT'.join(i))
            break
        break

    except:
        print('waiting')
        i=i+1
        if i==18:
            print('Kindly remove usb cable and try again')
            break


print('here we go')
while True:
    print(ser.readline())

Python自动选择串口（适用于Arduino）

4 个答案: