我在CentOS6上使用过cassandra。我已经安装了java，下载并且没有配备cassandra tar，使用：
启动cassandrabin/cassandra
然后使用来自coppied文件的cqlsh：
bin/cqlsh
现在在cqlsh上一切正常，我创建了密钥空间，创建了表和测试查询，但是当我尝试导入大约198GB的csv文件时，我在5分钟后出现rpc超时错误，而没有超时在conf / cassandra.yaml配置文件名为rpc中，我将写入超时增加到20000ms，但没有任何改进。然后我选择了pycassa的解决方案并尝试使用insert命令导入，但是经过一段时间插入30K到180K记录程序失败并出现超时错误。
pycassa.pool.AllServersUnavailable: An attempt was made to connect to each of the servers twice, but none of the attempts succeeded. The last failure was timeout: timed out
我是否需要正确安装。我们注意到的另一件事是，复制数据时速度非常慢而且没有使用服务器资源，而在使用复制命令时，它应该使用内存和处理器来达到峰值容量，因为没有其他进程正在运行。你能建议配置设置吗？
我的节点已启动并正在运行？
nodetool status
Note: Ownership information does not include topology; for complete information, specify a keyspace
Datacenter: datacenter1
=======================
Status=Up/Down
|/ State=Normal/Leaving/Joining/Moving
-- Address Load Owns Host ID Token Rack
UN 127.0.0.1 25.54 MB 100.0% 6bc340b2-4534-400f-b23d-9fe3ed0c6971 -9120530846114649324 rack1
服务器配置：
OS CentOS 6.5版（最终版） 硬盘8Tb所有SSD驱动器 RAM 32GB 进程：型号名称：Intel（R）Xeon（R）CPU E5-2620 v2 @ 2.10GHz，24核（2个物理处理器，每个12核）
CONF / cassandra.yaml
# Cassandra storage config YAML
cluster_name: 'Test Cluster'
# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
num_tokens: 256
# that do not have vnodes enabled.
# initial_token:
hinted_handoff_enabled: true
max_hint_window_in_ms: 10800000 # 3 hours
hinted_handoff_throttle_in_kb: 1024
max_hints_delivery_threads: 2
batchlog_replay_throttle_in_kb: 1024
authenticator: AllowAllAuthenticator
authorizer: AllowAllAuthorizer
permissions_validity_in_ms: 2000
partitioner: org.apache.cassandra.dht.Murmur3Partitioner
data_file_directories:
- /data/cassandra/data
# commit log
commitlog_directory: /var/lib/cassandra/commitlog
disk_failure_policy: stop
commit_failure_policy: stop
# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
key_cache_size_in_mb:
# Default is 14400 or 4 hours.
key_cache_save_period: 14400
# Default value is 0, to disable row caching.
row_cache_size_in_mb: 0
# Duration in seconds after which Cassandra should
# safe the row cache. Caches are saved to saved_caches_directory as specified
# in this configuration file.
#
# Saved caches greatly improve cold-start speeds, and is relatively cheap in
# terms of I/O for the key cache. Row cache saving is much more expensive and
# has limited use.
#
# Default is 0 to disable saving the row cache.
row_cache_save_period: 0
# Number of keys from the row cache to save
# Disabled by default, meaning all keys are going to be saved
# row_cache_keys_to_save: 100
# The off-heap memory allocator. Affects storage engine metadata as
# well as caches. Experiments show that JEMAlloc saves some memory
# than the native GCC allocator (i.e., JEMalloc is more
# fragmentation-resistant).
#
# Supported values are: NativeAllocator, JEMallocAllocator
#
# If you intend to use JEMallocAllocator you have to install JEMalloc as library and
# modify cassandra-env.sh as directed in the file.
#
# Defaults to NativeAllocator
# memory_allocator: NativeAllocator
# saved caches
saved_caches_directory: /var/lib/cassandra/saved_caches
# commitlog_sync: batch
# commitlog_sync_batch_window_in_ms: 50
#
# It should be at least as large as the concurrent_writes setting.
commitlog_sync: periodic
commitlog_sync_period_in_ms: 10000
# commitlog_periodic_queue_size:
commitlog_segment_size_in_mb: 32
# any class that implements the SeedProvider interface and has a
# constructor that takes a Map<String, String> of parameters will do.
seed_provider:
# multiple nodes!
- class_name: org.apache.cassandra.locator.SimpleSeedProvider
parameters:
# seeds is actually a comma-delimited list of addresses.
# Ex: "<ip1>,<ip2>,<ip3>"
- seeds: "127.0.0.1"
# your system; (8 * number_of_cores) is a good rule of thumb.
concurrent_reads: 32
concurrent_writes: 32
# Total memory to use for sstable-reading buffers. Defaults to
# the smaller of 1/4 of heap or 512MB.
# file_cache_size_in_mb: 512
# Total memory to use for memtables. Cassandra will flush the largest
# memtable when this much memory is used.
# If omitted, Cassandra will set it to 1/4 of the heap.
# memtable_total_space_in_mb: 2048
# Total space to use for commitlogs. Since commitlog segments are
# mmapped, and hence use up address space, the default size is 32
# on 32-bit JVMs, and 1024 on 64-bit JVMs.
#
# If space gets above this value (it will round up to the next nearest
# segment multiple), Cassandra will flush every dirty CF in the oldest
# segment and remove it. So a small total commitlog space will tend
# to cause more flush activity on less-active columnfamilies.
# commitlog_total_space_in_mb: 4096
# This sets the amount of memtable flush writer threads. These will
# be blocked by disk io, and each one will hold a memtable in memory
# while blocked. If you have a large heap and many data directories,
# you can increase this value for better flush performance.
# By default this will be set to the amount of data directories defined.
#memtable_flush_writers: 1
# the number of full memtables to allow pending flush, that is,
# waiting for a writer thread. At a minimum, this should be set to
# the maximum number of secondary indexes created on a single CF.
memtable_flush_queue_size: 4
# Whether to, when doing sequential writing, fsync() at intervals in
# order to force the operating system to flush the dirty
# buffers. Enable this to avoid sudden dirty buffer flushing from
# impacting read latencies. Almost always a good idea on SSDs; not
# necessarily on platters.
trickle_fsync: false
trickle_fsync_interval_in_kb: 10240
# TCP port, for commands and data
storage_port: 7000
# SSL port, for encrypted communication. Unused unless enabled in
# encryption_options
ssl_storage_port: 7001
# Address to bind to and tell other Cassandra nodes to connect to. You
# _must_ change this if you want multiple nodes to be able to
# communicate!
#
# Leaving it blank leaves it up to InetAddress.getLocalHost(). This
# will always do the Right Thing _if_ the node is properly configured
# (hostname, name resolution, etc), and the Right Thing is to use the
# address associated with the hostname (it might not be).
#
# Setting this to 0.0.0.0 is always wrong.
listen_address: localhost
# Address to broadcast to other Cassandra nodes
# Leaving this blank will set it to the same value as listen_address
# broadcast_address: 1.2.3.4
# Internode authentication backend, implementing IInternodeAuthenticator;
# used to allow/disallow connections from peer nodes.
# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator
# Whether to start the native transport server.
# Please note that the address on which the native transport is bound is the
# same as the rpc_address. The port however is different and specified below.
start_native_transport: true
# port for the CQL native transport to listen for clients on
native_transport_port: 9042
# The maximum threads for handling requests when the native transport is used.
# This is similar to rpc_max_threads though the default differs slightly (and
# there is no native_transport_min_threads, idle threads will always be stopped
# after 30 seconds).
# native_transport_max_threads: 128
#
# The maximum size of allowed frame. Frame (requests) larger than this will
# be rejected as invalid. The default is 256MB.
# native_transport_max_frame_size_in_mb: 256
# Whether to start the thrift rpc server.
start_rpc: true
# The address to bind the Thrift RPC service and native transport
# server -- clients connect here.
#
# Leaving this blank has the same effect it does for ListenAddress,
# (i.e. it will be based on the configured hostname of the node).
#
# Note that unlike ListenAddress above, it is allowed to specify 0.0.0.0
# here if you want to listen on all interfaces, but that will break clients
# that rely on node auto-discovery.
rpc_address: localhost
# port for Thrift to listen for clients on
rpc_port: 9160
# enable or disable keepalive on rpc connections
rpc_keepalive: true
# Cassandra provides two out-of-the-box options for the RPC Server:
#
# sync -> One thread per thrift connection. For a very large number of clients, memory
# will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size
# per thread, and that will correspond to your use of virtual memory (but physical memory
# may be limited depending on use of stack space).
#
# hsha -> Stands for "half synchronous, half asynchronous." All thrift clients are handled
# asynchronously using a small number of threads that does not vary with the amount
# of thrift clients (and thus scales well to many clients). The rpc requests are still
# synchronous (one thread per active request).
#
# The default is sync because on Windows hsha is about 30% slower. On Linux,
# sync/hsha performance is about the same, with hsha of course using less memory.
#
# Alternatively, can provide your own RPC server by providing the fully-qualified class name
# of an o.a.c.t.TServerFactory that can create an instance of it.
rpc_server_type: sync
# Uncomment rpc_min|max_thread to set request pool size limits.
#
# Regardless of your choice of RPC server (see above), the number of maximum requests in the
# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
# RPC server, it also dictates the number of clients that can be connected at all).
#
# The default is unlimited and thus provides no protection against clients overwhelming the server. You are
# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
#
# rpc_min_threads: 16
# rpc_max_threads: 2048
# uncomment to set socket buffer sizes on rpc connections
# rpc_send_buff_size_in_bytes:
# rpc_recv_buff_size_in_bytes:
# Uncomment to set socket buffer size for internode communication
# Note that when setting this, the buffer size is limited by net.core.wmem_max
# and when not setting it it is defined by net.ipv4.tcp_wmem
# See:
# /proc/sys/net/core/wmem_max
# /proc/sys/net/core/rmem_max
# /proc/sys/net/ipv4/tcp_wmem
# /proc/sys/net/ipv4/tcp_wmem
# and: man tcp
# internode_send_buff_size_in_bytes:
# internode_recv_buff_size_in_bytes:
# Frame size for thrift (maximum message length).
thrift_framed_transport_size_in_mb: 15
# Set to true to have Cassandra create a hard link to each sstable
# flushed or streamed locally in a backups/ subdirectory of the
# keyspace data. Removing these links is the operator's
# responsibility.
incremental_backups: false
# Whether or not to take a snapshot before each compaction. Be
# careful using this option, since Cassandra won't clean up the
# snapshots for you. Mostly useful if you're paranoid when there
# is a data format change.
snapshot_before_compaction: false
# Whether or not a snapshot is taken of the data before keyspace truncation
# or dropping of column families. The STRONGLY advised default of true
# should be used to provide data safety. If you set this flag to false, you will
# lose data on truncation or drop.
auto_snapshot: true
# When executing a scan, within or across a partition, we need to keep the
# tombstones seen in memory so we can return them to the coordinator, which
# will use them to make sure other replicas also know about the deleted rows.
# With workloads that generate a lot of tombstones, this can cause performance
# problems and even exaust the server heap.
# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets)
# Adjust the thresholds here if you understand the dangers and want to
# scan more tombstones anyway. These thresholds may also be adjusted at runtime
# using the StorageService mbean.
tombstone_warn_threshold: 1000
tombstone_failure_threshold: 100000
# Add column indexes to a row after its contents reach this size.
# Increase if your column values are large, or if you have a very large
# number of columns. The competing causes are, Cassandra has to
# deserialize this much of the row to read a single column, so you want
# it to be small - at least if you do many partial-row reads - but all
# the index data is read for each access, so you don't want to generate
# that wastefully either.
column_index_size_in_kb: 64
# Size limit for rows being compacted in memory. Larger rows will spill
# over to disk and use a slower two-pass compaction process. A message
# will be logged specifying the row key.
in_memory_compaction_limit_in_mb: 64
# Number of simultaneous compactions to allow, NOT including
# validation "compactions" for anti-entropy repair. Simultaneous
# compactions can help preserve read performance in a mixed read/write
# workload, by mitigating the tendency of small sstables to accumulate
# during a single long running compactions. The default is usually
# fine and if you experience problems with compaction running too
# slowly or too fast, you should look at
# compaction_throughput_mb_per_sec first.
#
# concurrent_compactors defaults to the number of cores.
# Uncomment to make compaction mono-threaded, the pre-0.8 default.
#concurrent_compactors: 1
# Multi-threaded compaction. When enabled, each compaction will use
# up to one thread per core, plus one thread per sstable being merged.
# This is usually only useful for SSD-based hardware: otherwise,
# your concern is usually to get compaction to do LESS i/o (see:
# compaction_throughput_mb_per_sec), not more.
multithreaded_compaction: false
# Throttles compaction to the given total throughput across the entire
# system. The faster you insert data, the faster you need to compact in
# order to keep the sstable count down, but in general, setting this to
# 16 to 32 times the rate you are inserting data is more than sufficient.
# Setting this to 0 disables throttling. Note that this account for all types
# of compaction, including validation compaction.
compaction_throughput_mb_per_sec: 16
# Track cached row keys during compaction, and re-cache their new
# positions in the compacted sstable. Disable if you use really large
# key caches.
compaction_preheat_key_cache: true
# Throttles all outbound streaming file transfers on this node to the
# given total throughput in Mbps. This is necessary because Cassandra does
# mostly sequential IO when streaming data during bootstrap or repair, which
# can lead to saturating the network connection and degrading rpc performance.
# When unset, the default is 200 Mbps or 25 MB/s.
# stream_throughput_outbound_megabits_per_sec: 200
# How long the coordinator should wait for read operations to complete
read_request_timeout_in_ms: 5000
# How long the coordinator should wait for seq or index scans to complete
range_request_timeout_in_ms: 10000
# How long the coordinator should wait for writes to complete
write_request_timeout_in_ms: 20000
# How long a coordinator should continue to retry a CAS operation
# that contends with other proposals for the same row
cas_contention_timeout_in_ms: 1000
# How long the coordinator should wait for truncates to complete
# (This can be much longer, because unless auto_snapshot is disabled
# we need to flush first so we can snapshot before removing the data.)
truncate_request_timeout_in_ms: 60000
# The default timeout for other, miscellaneous operations
request_timeout_in_ms: 10000
# Enable operation timeout information exchange between nodes to accurately
# measure request timeouts. If disabled, replicas will assume that requests
# were forwarded to them instantly by the coordinator, which means that
# under overload conditions we will waste that much extra time processing
# already-timed-out requests.
#
# Warning: before enabling this property make sure to ntp is installed
# and the times are synchronized between the nodes.
cross_node_timeout: false
# Enable socket timeout for streaming operation.
# When a timeout occurs during streaming, streaming is retried from the start
# of the current file. This _can_ involve re-streaming an important amount of
# data, so you should avoid setting the value too low.
# Default value is 0, which never timeout streams.
# streaming_socket_timeout_in_ms: 0
# phi value that must be reached for a host to be marked down.
# most users should never need to adjust this.
# phi_convict_threshold: 8
# endpoint_snitch -- Set this to a class that implements
# IEndpointSnitch. The snitch has two functions:
# - it teaches Cassandra enough about your network topology to route
# requests efficiently
# - it allows Cassandra to spread replicas around your cluster to avoid
# correlated failures. It does this by grouping machines into
# "datacenters" and "racks." Cassandra will do its best not to have
# more than one replica on the same "rack" (which may not actually
# be a physical location)
#
# IF YOU CHANGE THE SNITCH AFTER DATA IS INSERTED INTO THE CLUSTER,
# YOU MUST RUN A FULL REPAIR, SINCE THE SNITCH AFFECTS WHERE REPLICAS
# ARE PLACED.
#
# Out of the box, Cassandra provides
# - SimpleSnitch:
# Treats Strategy order as proximity. This can improve cache
# locality when disabling read repair. Only appropriate for
# single-datacenter deployments.
# - GossipingPropertyFileSnitch
# This should be your go-to snitch for production use. The rack
# and datacenter for the local node are defined in
# cassandra-rackdc.properties and propagated to other nodes via
# gossip. If cassandra-topology.properties exists, it is used as a
# fallback, allowing migration from the PropertyFileSnitch.
# - PropertyFileSnitch:
# Proximity is determined by rack and data center, which are
# explicitly configured in cassandra-topology.properties.
# - Ec2Snitch:
# Appropriate for EC2 deployments in a single Region. Loads Region
# and Availability Zone information from the EC2 API. The Region is
# treated as the datacenter, and the Availability Zone as the rack.
# Only private IPs are used, so this will not work across multiple
# Regions.
# - Ec2MultiRegionSnitch:
# Uses public IPs as broadcast_address to allow cross-region
# connectivity. (Thus, you should set seed addresses to the public
# IP as well.) You will need to open the storage_port or
# ssl_storage_port on the public IP firewall. (For intra-Region
# traffic, Cassandra will switch to the private IP after
# establishing a connection.)
# - RackInferringSnitch:
# Proximity is determined by rack and data center, which are
# assumed to correspond to the 3rd and 2nd octet of each node's IP
# address, respectively. Unless this happens to match your
# deployment conventions, this is best used as an example of
# writing a custom Snitch class and is provided in that spirit.
#
# You can use a custom Snitch by setting this to the full class name
# of the snitch, which will be assumed to be on your classpath.
endpoint_snitch: SimpleSnitch
# controls how often to perform the more expensive part of host score
# calculation
dynamic_snitch_update_interval_in_ms: 100
# controls how often to reset all host scores, allowing a bad host to
# possibly recover
dynamic_snitch_reset_interval_in_ms: 600000
# if set greater than zero and read_repair_chance is < 1.0, this will allow
# 'pinning' of replicas to hosts in order to increase cache capacity.
# The badness threshold will control how much worse the pinned host has to be
# before the dynamic snitch will prefer other replicas over it. This is
# expressed as a double which represents a percentage. Thus, a value of
# 0.2 means Cassandra would continue to prefer the static snitch values
# until the pinned host was 20% worse than the fastest.
dynamic_snitch_badness_threshold: 0.1
# request_scheduler -- Set this to a class that implements
# RequestScheduler, which will schedule incoming client requests
# according to the specific policy. This is useful for multi-tenancy
# with a single Cassandra cluster.
# NOTE: This is specifically for requests from the client and does
# not affect inter node communication.
# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
# client requests to a node with a separate queue for each
# request_scheduler_id. The scheduler is further customized by
# request_scheduler_options as described below.
request_scheduler: org.apache.cassandra.scheduler.NoScheduler
# Scheduler Options vary based on the type of scheduler
# NoScheduler - Has no options
# RoundRobin
# - throttle_limit -- The throttle_limit is the number of in-flight
# requests per client. Requests beyond
# that limit are queued up until
# running requests can complete.
# The value of 80 here is twice the number of
# concurrent_reads + concurrent_writes.
# - default_weight -- default_weight is optional and allows for
# overriding the default which is 1.
# - weights -- Weights are optional and will default to 1 or the
# overridden default_weight. The weight translates into how
# many requests are handled during each turn of the
# RoundRobin, based on the scheduler id.
#
# request_scheduler_options:
# throttle_limit: 80
# default_weight: 5
# weights:
# Keyspace1: 1
# Keyspace2: 5
# request_scheduler_id -- An identifier based on which to perform
# the request scheduling. Currently the only valid option is keyspace.
# request_scheduler_id: keyspace
# Enable or disable inter-node encryption
# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that
# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher
# suite for authentication, key exchange and encryption of the actual data transfers.
# Use the DHE/ECDHE ciphers if running in FIPS 140 compliant mode.
# NOTE: No custom encryption options are enabled at the moment
# The available internode options are : all, none, dc, rack
#
# If set to dc cassandra will encrypt the traffic between the DCs
# If set to rack cassandra will encrypt the traffic between the racks
#
# The passwords used in these options must match the passwords used when generating
# the keystore and truststore. For instructions on generating these files, see:
# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
#
server_encryption_options:
internode_encryption: none
keystore: conf/.keystore
keystore_password: cassandra
truststore: conf/.truststore
truststore_password: cassandra
# More advanced defaults below:
# protocol: TLS
# algorithm: SunX509
# store_type: JKS
# cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
# require_client_auth: false
# enable or disable client/server encryption.
client_encryption_options:
enabled: false
keystore: conf/.keystore
keystore_password: cassandra
# require_client_auth: false
# Set trustore and truststore_password if require_client_auth is true
# truststore: conf/.truststore
# truststore_password: cassandra
# More advanced defaults below:
# protocol: TLS
# algorithm: SunX509
# store_type: JKS
# cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
# internode_compression controls whether traffic between nodes is
# compressed.
# can be: all - all traffic is compressed
# dc - traffic between different datacenters is compressed
# none - nothing is compressed.
internode_compression: all
# Enable or disable tcp_nodelay for inter-dc communication.
# Disabling it will result in larger (but fewer) network packets being sent,
# reducing overhead from the TCP protocol itself, at the cost of increasing
# latency if you block for cross-datacenter responses.
inter_dc_tcp_nodelay: false
# Enable or disable kernel page cache preheating from contents of the key cache after compaction.
# When enabled it would preheat only first "page" (4KB) of each row to optimize
# for sequential access. Note: This could be harmful for fat rows, see CASSANDRA-4937
# for further details on that topic.
preheat_kernel_page_cache: false
答案 0 :(得分：1)
您可以尝试一些建议：