Question

好朋友我不能把我的eth1放在模式监视器上......

Interface   Chipset     Driver

eth1        Unknown     wl - [phy0]mon0: ERROR mientras se obtenían las banderas de interfaz: No existe el dispositivo

                (monitor mode enabled on mon0)

运行时显示器显示：

sudo airodump-ng mon0Interface mon0: 
ioctl(SIOCGIFINDEX) failed: No such device

任何人都可以帮忙吗？

Answer 1

我能想到的一些事情，第一是不支持的芯片组！如果您提供信息将有所帮助。第二个是缺少库或未修补的驱动程序！

经过测试和工作的卡片

AWUS036H (rtl8187, r8187) - both mac80211 and IEEE drivers - passed
AWUS036NH (Ralink RT2870/3070) - using the mac80211 rt2x00usb drivers - passed
BCM4312 802.11b/g LP-PHY (rev 01) - using the mac80211 b43, works well - passed
Rockland N3 - (Ralink RT2870/3070) - using the mac80211 rt2x00usb drivers -passed
Edimax EW-7318USG USB - (Ralink RT2501/RT2573) - using the mac80211 rt2500usb/rt73usb drivers -passed
ASUSTek Computer, Inc. RT2573 - using the mac80211 rt2500usb/rt73usb drivers -passed
Linksys WUSB54GC ver 3 - using the mac80211 rt2800usb drivers -passed
Ubiquiti SRC - using the mac80211 ath9k drivers-passed
Internal Intel Corporation PRO/Wireless 3945ABG - using the mac80211 iwl3945 drivers-passed
Dlink WNA-2330 PCMCIA - using the mac80211 ath5k drivers-passed
Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) - using the mac80211 ath9k drivers-passed
Netgear wg111v2 - using the mac80211 rtl8187 drivers-passed
ZyXEL AG-225H v2 - using the mac80211 zd1211 drivers - passed
Intel 4956/5xxx - using the iwlagn drivers - passed

工作，无需注射

Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03)
Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

非工作卡

D-Link DWL-122 - using the mac80211 prism2_usb drivers - fail
Linksys WUSB600N v2 - using the mac80211 rt2800usb drivers - fail
AWUS051NH - fail

Answer 2

您的芯片组不支持注射。尝试使用kali linux http://www.kali.org

我在设置模式监视器airmon-ng start eth1时出错

2 个答案: