Question

这是对先前询问的与EW7811U WiFi适配器相关的问题的评论（该主题已关闭，因此我无法直接回答）。我有相同的Edimax EW7811U适配器，这是我如何使用Red Pitaya和我的WPA2保护的802.11n网络。

首先关闭Red Pitaya，取出存储卡并将其连接到PC（我使用存储卡附带的适配器并将其插入笔记本电脑的存储卡插槽中。）

编辑文件/etc/network/wpa_supplicant.conf并插入ssid和psk字符串：

# WPA2 configuration example
network={
   ssid="ssid-string"
   psk="password-string"
   proto=WPA2
   key_mgmt=WPA-PSK
   pairwise=CCMP
   group=CCMP
   auth_alg=OPEN
}

保存文件并将存储卡放回Red Pitaya并重新启动。

在我的控制台中，我可以看到wlan0接口已初始化，DHCP客户端获取IP地址：

++ Bringing up wlan0
Successfully initialized wpa_supplicant
rfkill: Cannot open RFKILL control device
ioctl[SIOCSIWAP]: Operation not permitted
udhcpc (v1.20.1) started
Sending discover...
Sending discover...
Sending discover...
Sending select for 192.168.11.115...
Lease of 192.168.11.115 obtained, lease time 43200

您可以使用iwconfig检查接口状态：

redpitaya> iwconfig
wlan0     IEEE 802.11bgn  ESSID:"my-ssid"  Nickname:"<WIFI@REALTEK>"
      Mode:Managed  Frequency:2.412 GHz  Access Point: 20:C9:D0:1D:AB:CD   
      Bit Rate:150 Mb/s   Sensitivity:0/0  
      Retry:off   RTS thr:off   Fragment thr:off
      Encryption key:****-****-****-****-****-****-****-****   Security mode:open
      Power Management:off
      Link Quality=100/100  Signal level=83/100  Noise level=0/100
      Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
      Tx excessive retries:0  Invalid misc:0   Missed beacon:0

Red Pitaya WiFi适配器Edimax EW7811U

0 个答案: