Question

更新1-13-10 我已经能够使用下面的代码找到一些成功的映射。我基本上忽略了没有映射的任何属性，然后映射它们。我希望得到关于我是否以最佳方式进行此项讨论的反馈意见。另外，我不知道如何进行单元测试这种映射。我的印象是使用AutoMapper应该有助于减轻检查每个属性的繁琐。

这是我的新代码：

Mapper.CreateMap<MoveEntity, MoveEntityDto>()
           .ForMember(dest => dest.PrimaryOriginTransferee, opt => opt.Ignore())
           .ForMember(dest => dest.PrimaryDestinationTransferee, opt => opt.Ignore())
           .ForMember(dest => dest.Customer, opt => opt.Ignore())
           .ForMember(dest => dest.DestinationAddress, opt => opt.Ignore())
           .ForMember(dest => dest.OriginAddress, opt => opt.Ignore())
           .ForMember(dest => dest.Order, opt => opt.Ignore())
           .ForMember(dest => dest.Shipment, opt => opt.Ignore())
           .ForMember(dest => dest.SourceSystemName, opt => opt.Ignore());

        Mapper.CreateMap<ContactEntity, TransfereeEntityDto>();
        Mapper.CreateMap<CustomerEntity, CustomerEntityDto>();
        Mapper.CreateMap<AddressEntity, AddressEntityDto>();
        Mapper.CreateMap<OrderEntity, OrderEntityDto>()
            .ForMember(dest => dest.OrderForwarding, opt => opt.Ignore())
            .ForMember(dest => dest.Forwarder, opt => opt.Ignore());
        Mapper.CreateMap<ShipmentEntity, ShipmentEntityDto>()
            .ForMember(dest => dest.Services, opt => opt.Ignore());
        Mapper.CreateMap<ServiceEntity, ServiceEntityDto>()
            .ForMember(dest => dest.ServiceTypeCode, opt => opt.Ignore()) //TODO: ServiceTypeCode not being mapped, should it?
            .ForMember(dest => dest.SourceSystemName, opt => opt.MapFrom(src => Enum.GetName(typeof(SourceSystemName), src.SourceSystemName)));
        Mapper.CreateMap<OrderForwardingEntity, OrderForwardingEntityDto>();


        Mapper.AssertConfigurationIsValid();


        MoveEntityDto moveEntityDto = Mapper.Map<MoveEntity, MoveEntityDto>(moveEntity);
        moveEntityDto.PrimaryDestinationTransferee = Mapper.Map<ContactEntity, TransfereeEntityDto>(moveEntity.PrimaryDestinationTransferee);
        moveEntityDto.PrimaryOriginTransferee = Mapper.Map<ContactEntity, TransfereeEntityDto>(moveEntity.PrimaryOriginTransferee);
        moveEntityDto.Customer = Mapper.Map<CustomerEntity, CustomerEntityDto>(moveEntity.Customer);
        moveEntityDto.DestinationAddress = Mapper.Map<AddressEntity, AddressEntityDto>(moveEntity.DestinationAddress);
        moveEntityDto.OriginAddress = Mapper.Map<AddressEntity, AddressEntityDto>(moveEntity.OriginAddress);
        moveEntityDto.Order = Mapper.Map<OrderEntity, OrderEntityDto>(moveEntity.Order);
        moveEntityDto.Order.OrderForwarding = Mapper.Map<OrderForwardingEntity, OrderForwardingEntityDto>(moveEntity.Order.OrderForwarding);
        //moveEntityDto.Order.Forwarder = Mapper.Map<ForwarderEntity, ForwarderEntityDto>(moveEntity.Order.Forwarder);  //Apparently there is no forwarder entity for an Order
        moveEntityDto.Shipment = Mapper.Map<ShipmentEntity, ShipmentEntityDto>(moveEntity.Shipment);
        moveEntityDto.Shipment.Services = Mapper.Map<ServiceEntity[], ServiceEntityDto[]>(moveEntity.Shipment.ServiceEntities);

原帖：

我第一次尝试使用AutoMapper，以便从Bussiness对象映射到DTO。我遇到了一些我不知道如何排除故障的问题，包括以下异常：

AutoMapper.AutoMapperMappingException：尝试将Graebel.SP.BO.MoveEntity映射到Graebel.SOA.Contracts.DataContracts.SP.MoveEntity。抛出了“AutoMapper.AutoMapperMappingException”类型的异常

以下是我正在运行的AutoMapper代码：

public MoveEntityDto MapMoveEntityToMoveEntityDto(MoveEntity moveEntity)
    {
        Mapper.CreateMap<MoveEntity, MoveEntityDto>()
            .ForMember(dest => dest.PrimaryOriginTransferee, opt => opt.MapFrom(src => src.PrimaryOriginTransferee))
            .ForMember(dest => dest.PrimaryDestinationTransferee,opt => opt.MapFrom(src => src.PrimaryDestinationTransferee))
            .ForMember(dest => dest.Customer, opt => opt.MapFrom(src => src.Customer))
            .ForMember(dest => dest.DestinationAddress, opt => opt.MapFrom(src => src.DestinationAddress))
            .ForMember(dest => dest.Order, opt => opt.MapFrom(src => src.Order))
            .ForMember(dest => dest.OriginAddress, opt => opt.MapFrom(src => src.OriginAddress))
            .ForMember(dest => dest.Shipment, opt => opt.MapFrom(src => src.Shipment))
            .ForMember(dest => dest.SourceSystemName, opt => opt.Ignore());

        Mapper.AssertConfigurationIsValid();
        MoveEntityDto moveEntityDto = Mapper.Map<MoveEntity, MoveEntityDto>(moveEntity);

        return moveEntityDto;
    }

这是我试图映射的DTO（MoveEntityDto）：

public class MoveEntityDto
{       
    public bool IsOrderDetailPageModified { get; set; }  
    public bool IsRoutingPageModified { get; set; }  
    public bool IsServicePageModified { get; set; }  
    public bool IsContentAndContainerPageModified { get; set; }   
    public string FamilyRange { get; set; }  
    public string Office { get; set; }
    public string ActivityType { get; set; }
    public string ActivitySubject { get; set; }
    public string ActivityNote { get; set; }
    public TransfereeEntity PrimaryOriginTransferee { get; set; }
    public TransfereeEntity PrimaryDestinationTransferee { get; set; }
    public CustomerEntity Customer { get; set; }
    public AddressEntity OriginAddress { get; set; }
    public AddressEntity DestinationAddress { get; set; }
    public OrderEntity Order { get; set; }
    public ShipmentEntity Shipment { get; set; }
    public string PortalId { get; set; }
    public string SourceSystemId { get; set; }
    public EnterpriseEnums.SourceSystemName SourceSystemName { get; set; }

    public MoveEntity()
    {
        PrimaryOriginTransferee = new TransfereeEntity();
        PrimaryDestinationTransferee = new TransfereeEntity();
        Customer = new CustomerEntity();
        OriginAddress = new AddressEntity();
        DestinationAddress = new AddressEntity();
        Order = new OrderEntity();
        Shipment = new ShipmentEntity();
    }

    public bool HasShipment()
    {
        if (Shipment.ExternalShipmentId > 0)
        {
            return true;
        }
        return false;
    }
 }

这是我想要从

映射的业务对象（MoveEntity）

 public class MoveEntity
{
    public int SourceId { get; set; }
    public int MoveId { get; set; }
    public bool IsOrderDetailPageModified { get; set; }  // TODO: Internal -  Remove from data contract
    public bool IsRoutingPageModified { get; set; }  // TODO: Internal -  Remove from data contract
    public bool IsServicePageModified { get; set; }  // TODO: Internal -  Remove from data contract
    public bool IsContentAndContainerPageModified { get; set; }  // Rmove from data contract
    public string FamilyRange { get; set; } // TODO: Is this being used?
    public string Office { get; set; }
    public string ActivityType { get; set; }
    public string ActivitySubject { get; set; }
    public string ActivityNote { get; set; }
    public ContactEntity PrimaryOriginTransferee { get; set; }
    public ContactEntity PrimaryDestinationTransferee { get; set; }
    public CustomerEntity Customer { get; set; }
    public AddressEntity OriginAddress { get; set; }
    public AddressEntity DestinationAddress { get; set; }
    public OrderEntity Order { get; set; }
    public ShipmentEntity Shipment { get; set; }
    public string CreatedBy { get; set; }
    public DateTime CreatedDate { get; set; }
    public string ModifiedBy { get; set; }
    public DateTime ModifiedDate { get; set; }
    public string SourceSystemId { get; set; }
    public string SourceSystemName { get; set; }
    public string Version { get; set; }
    public string PortalId { get; set; }

    public MoveEntity()
    {
        PrimaryOriginTransferee = new ContactEntity
        {
            ContactTypeId = ContactEntity.ContactType.PrimaryOriginationTransferee
        };

        PrimaryDestinationTransferee = new ContactEntity
        {
            ContactTypeId = ContactEntity.ContactType.PrimaryDestinationTransferee
        };

        OriginAddress = new AddressEntity
        {
            AddressTypeId = AddressEntity.AddressType.Origination
        };

        DestinationAddress = new AddressEntity
        {
            AddressTypeId = AddressEntity.AddressType.Destination
        };

        Order = new OrderEntity();
        Customer = new CustomerEntity();
        Shipment = new ShipmentEntity();
    }

    public bool HasShipment()
    {
        if (Shipment.ShipmentId > 0)
        {
            return true;
        }
        return false;
    }
}

每个类中的属性几乎完全符合名称，但它们的类型不同。因此，我尝试使用“MapFrom”表达式执行自定义映射。但是，AutoMapper似乎无法让我在没有抱怨的情况下从一种对象类型指向另一种对象类型。

我也尝试过映射属性到属性，没有运气。它看起来像这样：

.ForMember(dest => dest.PrimaryOriginTransferee.Email, opt => opt.MapFrom(src => src.PrimaryOriginTransferee.Email))

然而，在尝试此操作时，我收到以下异常：

必须解析为顶级会员。参数名称：lambdaExpression。

我一直在寻找AutoMapper可用的文档很难理解。有人可以指出我正确的方向如何正确使用这个实用程序？

提前感谢您的帮助！

亚当

Answer 1

我终于让我自己开始工作了。我最终使用的代码发布在下面。以正确的顺序创建对象的地图被证明是重要的。我通过这件事学到了很多东西。

我已经将我的映射组织到一个配置文件中，我不会进入这里，只要说如果你可以在继承自AutoMapper Profile类的类之外使用我的例子，你就会想要使用Mapper .CreateMap而不仅仅是Create Map。

 private void CreateMaps()
    {

        CreateMap<ContactEntity, TransfereeEntityDto>();

        //ContactEntity Mapping
        CreateMap<ContactEntity, TransfereeEntityDto>();

        //CustomerEntity Mapping
        CreateMap<CustomerEntity, CustomerEntityDto>();

        //AddressEntity Mapping
        CreateMap<AddressEntity, AddressEntityDto>();

        //ServiceEntity Mapping
        CreateMap<ServiceEntity, ServiceEntityDto>()
          .ForMember(dto => dto.ServiceTypeCode, opt => opt.MapFrom(source => source.TypeCode))
          .ForMember(dto => dto.ServiceDescriptionCode, opt => opt.MapFrom(source => source.DescriptionCode))
          .ForMember(dest => dest.SourceSystemName, opt => opt.ResolveUsing<SourceSystemNameResolver>().FromMember(entity => entity.SourceSystemName));


        //VehicleEntity Mapping
        CreateMap<VehicleEntity, VehicleEntityDto>()
            .ForMember(dest => dest.SourceSystemName, opt => opt.ResolveUsing<SourceSystemNameResolver>().FromMember(entity => entity.SourceSystemName))
            .ForMember(dto => dto.PortalId, option => option.Ignore());  //TODO: Should PortalID be mapped to anything? It is not in the entity.

        //ContentEntity Mapping
        CreateMap<ContentEntity, ContentEntityDto>()
            .ForMember(dest => dest.SourceSystemName, opt => opt.ResolveUsing<SourceSystemNameResolver>().FromMember(entity => entity.SourceSystemName));

        //OrderForwardingEntity Mapping
        CreateMap<OrderForwardingEntity, OrderForwardingEntityDto>();

        //ContainerEntity Mapping
        CreateMap<ContainerEntity, ContainerEntityDto>()
            .ForMember(dest => dest.SourceSystemName, opt => opt.ResolveUsing<SourceSystemNameResolver>().FromMember(entity => entity.SourceSystemName));

        //ShipmentForwardingEntity Mapping
        CreateMap<ShipmentForwardingEntity, ShipmentForwardingEntityDto>();


        //ShipmentRouting Mapping
        CreateMap<ShipmentRoutingEntity, ShipmentRoutingEntityDto>();

        //ShipmentEntity Mapping
        CreateMap<ShipmentEntity, ShipmentEntityDto>()
            .ForMember(dest => dest.SourceSystemName, opt => opt.ResolveUsing<SourceSystemNameResolver>().FromMember(entity => entity.SourceSystemName))
            .ForMember(dto => dto.Services, option => option.MapFrom(source => source.ServiceEntities));

        //Forwarder mapping
        CreateMap<ContactEntity, ForwarderEntityDto>();
        //TODO: This property doesn't have any properties in the data contract

        //OrderEntity Mapping
        CreateMap<OrderEntity, OrderEntityDto>()
            .ForMember(dest => dest.SourceSystemName,
                       opt => opt.ResolveUsing<SourceSystemNameResolver>().FromMember(entity => entity.SourceSystemName));
            //.ForMember(dto => dto.Forwarder, option => option.MapFrom(entity=>entity.Forwarder)

        //MoveEntityMapping
        CreateMap<MoveEntity, MoveEntityDto>()
            .ForMember(dto => dto.SourceSystemName, opt => opt.ResolveUsing<SourceSystemNameResolver>().FromMember(entity => entity.SourceSystemName));

    }

Answer 2

我知道你已经有了这个工作但我会把它扔到那里以防其他人降落在这里。

在AutoMapper中，当你有嵌套的需要映射的对象时，即使它们完全相同（即一个契约类和一个匹配的模型类），你必须为子类定义映射，然后当定义父级的地图，在“.ForMember”选项中，您可以使用这些子级映射来映射父级。我知道这可能听起来令人困惑，但一个例子会说清楚。

说你有以下内容：

namespace Contracts.Entities
{
    public class Person
    {
        public string FirstName {get; set;}

        public string LastName {get; set;}

        public Address Address {get; set;}        
    }

    public class Address
    {
        public string Street {get; set;}

        public string City {get; set;}

        public string State {get; set;}        
    }
}

namespace Model.Entities
{
    public class Person
    {
        public string FirstName {get; set;}

        public string LastName {get; set;}

        public Address Address {get; set;}        
    }

    public class Address
    {
        public string Street {get; set;}

        public string City {get; set;}

        public string State {get; set;}        
    }
}

然后你去定义以下地图：

  Mapper.CreateMap<Contracts.Entities.Person, Model.Entities.Person>();
  Mapper.CreateMap<Contracts.Entities.Address, Model.Entities.Address>();

您可能认为AutoMapper在将Contract人员映射到模型人员时会知道使用地址映射，但事实并非如此。相反，这是你必须做的：

      Mapper.CreateMap<Contracts.Entities.Person, Model.Entities.Person>()
                    .ForMember(dest => dest.Address, opt => opt.MapFrom(src => Mapper.Map<Contracts.Entities.Address, Model.Entities.Address>(src.Address)));

 Mapper.CreateMap<Contracts.Entities.Address, Model.Entities.Address>();

因此，在您的情况下，您可以定义Mapper.CreateMap<ContactEntity,TransfereeEntity>()地图，然后在为PrimaryOriginTransferee定义地图时以与上述地址相同的方式调用该地图。即。

 Mapper.CreateMap<MoveEntity, MoveEntityDto>()
 .ForMember(dest => dest.PrimaryOriginTransferee , opt => opt.MapFrom(src => Mapper.Map<ContactEntity,TransfereeEntity>(src.PrimaryOriginTransferee )));

希望这有助于某人！

Answer 3

您需要为目标属性类型与目标属性类型不同的属性类型添加映射配置。

    Mapper.CreateMap<ContactEntity, TransfereeEntity>();

自动映射自定义映射异常

3 个答案: