Question

我正在尝试使用D3D11在Windows Phone 8上显示一个场景。我没有深度缓冲区（主要使用Windows手机SDK样本）工作。但现在我实际上需要一个深度缓冲来正确渲染场景。我在Windows Phone模拟器（win32版本）上使用了深度缓冲区，但是当我在任何Windows手机（ARM版本）上测试它时，我什么也得不到（黑屏）。

所以我必须点击我的计算机上的图形卡能够理解的东西（这是我认为未完全模拟的Windows手机模拟器的唯一部分），但是实际手机上的图形卡无法获得。< / p>

如果你有任何想法让我知道，我迷路了。这是我的代码：

UINT creationFlags = D3D11_CREATE_DEVICE_BGRA_SUPPORT;

  D3D_FEATURE_LEVEL featureLevels[] = 
  {
    D3D_FEATURE_LEVEL_9_3
  };

  // Create the Direct3D 11 API device object and a corresponding context.
  ComPtr<ID3D11Device> device;
  ComPtr<ID3D11DeviceContext> context;
  ThrowIfFailed(
    D3D11CreateDevice(
    nullptr, // Specify nullptr to use the default adapter.
    D3D_DRIVER_TYPE_HARDWARE,
    nullptr,
    creationFlags, // Set set debug and Direct2D compatibility flags.
    featureLevels, // List of feature levels this app can support.
    ARRAYSIZE(featureLevels),
    D3D11_SDK_VERSION, // Always set this to D3D11_SDK_VERSION.
    &device, // Returns the Direct3D device created.
    &m_featureLevel, // Returns feature level of device created.
    &context // Returns the device immediate context.
    )
    );

  // Get the Direct3D 11.1 API device and context interfaces.
  ThrowIfFailed(
    device.As(&m_d3dDevice)
    );

  ThrowIfFailed(
    context.As(&m_d3dContext)
    );

现在为深度缓冲区：

CD3D11_TEXTURE2D_DESC renderTargetDesc(
    DXGI_FORMAT_B8G8R8A8_UNORM,
    static_cast<UINT>(m_renderTargetSize.Width),
    static_cast<UINT>(m_renderTargetSize.Height),
    1,
    1,
    D3D11_BIND_RENDER_TARGET | D3D11_BIND_SHADER_RESOURCE
    );
  renderTargetDesc.MiscFlags = D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX | D3D11_RESOURCE_MISC_SHARED_NTHANDLE;

  // Allocate a 2-D surface as the render target buffer.
  ThrowIfFailed(
    m_d3dDevice->CreateTexture2D(
    &renderTargetDesc,
    nullptr,
    &m_renderTarget
    )
    );

  ThrowIfFailed(
    m_d3dDevice->CreateRenderTargetView(
    m_renderTarget.Get(),
    nullptr,
    &m_renderTargetView
    )
    );

  // Create a depth stencil view.
 CD3D11_TEXTURE2D_DESC depthBufferDesc(
    DXGI_FORMAT_D24_UNORM_S8_UINT,
    static_cast<UINT>(m_renderTargetSize.Width),
    static_cast<UINT>(m_renderTargetSize.Height),
    1,
    1,
    D3D11_BIND_DEPTH_STENCIL); //tried with D3D11_BIND_RENDER_TARGET with a format DXGI_FORMAT_R24G8_TYPELESS in didn't change anything

  ThrowIfFailed(
    m_d3dDevice->CreateTexture2D(
    &depthBufferDesc,
    nullptr,
    &m_depthStencilBuffer
    )
    );

  D3D11_DEPTH_STENCIL_DESC depthStencilDesc;
// Set up the description of the stencil state.
depthStencilDesc.DepthEnable = true;
depthStencilDesc.DepthWriteMask = D3D11_DEPTH_WRITE_MASK_ALL;
depthStencilDesc.DepthFunc = D3D11_COMPARISON_LESS;

depthStencilDesc.StencilEnable = true;
depthStencilDesc.StencilReadMask = 0xFF;
depthStencilDesc.StencilWriteMask = 0xFF;

// Stencil operations if pixel is front-facing.
depthStencilDesc.FrontFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.FrontFace.StencilDepthFailOp = D3D11_STENCIL_OP_INCR;
depthStencilDesc.FrontFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.FrontFace.StencilFunc = D3D11_COMPARISON_ALWAYS;

// Stencil operations if pixel is back-facing.
depthStencilDesc.BackFace.StencilFailOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.BackFace.StencilDepthFailOp = D3D11_STENCIL_OP_DECR;
depthStencilDesc.BackFace.StencilPassOp = D3D11_STENCIL_OP_KEEP;
depthStencilDesc.BackFace.StencilFunc = D3D11_COMPARISON_ALWAYS;

  ThrowIfFailed(
    m_d3dDevice->CreateDepthStencilState(
    &depthStencilDesc,
    &m_depthStencilState
    )
    );

  m_d3dContext->OMSetDepthStencilState(m_depthStencilState.Get(), 1);

  CD3D11_DEPTH_STENCIL_VIEW_DESC depthStencilViewDesc(
    D3D11_DSV_DIMENSION_TEXTURE2D, DXGI_FORMAT_D24_UNORM_S8_UINT, 0);
  ThrowIfFailed(
    m_d3dDevice->CreateDepthStencilView(
    m_depthStencilBuffer.Get(),
    &depthStencilViewDesc,
    &m_depthStencilView
    )
    );
  m_d3dContext->OMSetRenderTargets(1, m_renderTargetView.GetAddressOf(), m_depthStencilView.Get());

  CD3D11_VIEWPORT viewport(
    0.0f,
    0.0f,
    m_renderTargetSize.Width,
    m_renderTargetSize.Height
    );

  m_d3dContext->RSSetViewports(1, &viewport);

最后在绘图之前：

const float midnightBlue[] = { 245.0f/255.0f, 241.0/255.0f, 196.0f/255.0f, 1.000f };
    m_d3dContext->ClearRenderTargetView(
        m_renderTargetView.Get(),
        midnightBlue
        );

  m_d3dContext->ClearDepthStencilView(
        m_depthStencilView.Get(),
        D3D11_CLEAR_DEPTH,
        1.0f,
        0
        );

  m_d3dContext->OMSetRenderTargets(1, m_renderTargetView.GetAddressOf(), m_depthStencilView.Get()); //This only works in the Emulator.
  //m_d3dContext->OMSetRenderTargets(1, m_renderTargetView.GetAddressOf(), nullptr); This works fine but doesn't use the Depth buffer, so the scene is not very good.

WP8深度缓冲区在仿真器中工作，而不在ARM设备上工作

0 个答案: