Question

您好我正在使用Linux usb小工具工具来模拟USB闪存驱动器。它的工作正常，但性能非常低。

我使用由dd创建的4Gb文件，并在其上创建了一个ext2或vfat（尝试过两者）分区。比我使用以下命令序列安装它：

# modprobe dummy_hcd is_super_speed=1 # I tried is_high_speed=1, and no parameter too
# modprobe g_mass_storage file=/home/del/img/flash stall=0 # tried w/o stall=0 too
# mount /dev/sdc1 /mnt/tmp

之后我在dmesg中创建/ dev / sdc和/ dev / sdc1设备时没有任何错误：

[1256700.986581] usb 3-1: reset high-speed USB device number 5 using dummy_hcd
[1256701.022551]  gadget: high-speed config #1: Linux File-Backed Storage
[1256701.242481] usb 3-1: reset high-speed USB device number 5 using dummy_hcd
[1256701.278422]  gadget: high-speed config #1: Linux File-Backed Storage
[1256701.422339]  gadget: high-speed config #1: Linux File-Backed Storage
[1256934.915697] usb 3-1: reset high-speed USB device number 5 using dummy_hcd
[1256934.951628]  gadget: high-speed config #1: Linux File-Backed Storage
[1256935.915155] usb 3-1: reset high-speed USB device number 5 using dummy_hcd
[1256935.951090]  gadget: high-speed config #1: Linux File-Backed Storage
[1256936.095018]  gadget: high-speed config #1: Linux File-Backed Storage
[1317073.396892] usb-storage 3-1:1.0: Quirks match for vid 0525 pid a4a5: 10000
[1317073.396995] scsi53 : usb-storage 3-1:1.0
[1317074.411883] scsi 53:0:0:0: Direct-Access     Linux    File-CD Gadget   0302 PQ: 0 ANSI: 2
[1317074.412669] sd 53:0:0:0: Attached scsi generic sg3 type 0
[1317074.431910] sd 53:0:0:0: [sdc] 8388608 512-byte logical blocks: (4.29 GB/4.00 GiB)
[1317074.443816] sd 53:0:0:0: [sdc] Write Protect is off
[1317074.443821] sd 53:0:0:0: [sdc] Mode Sense: 0f 00 00 00
[1317074.455839] sd 53:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[1317074.551757]  sdc: sdc1
[1317074.683704] sd 53:0:0:0: [sdc] Attached SCSI removable disk

问题是IO性能非常差。编写200Mb文件需要相当长的时间：

$ ls -lh file
-rw-rw-r-- 1 root del 206M Sep  4 09:34 file
$ time sudo cp file /mnt/tmp/
real    11m59.618s
user    0m0.000s
sys     0m0.260s

大约300K /秒。但是，同一系统上的同一文件会在不到一分钟的时间内复制到真正的USB闪存中。

Iotop显示的内容如下：

 TID  PRIO  USER     DISK READ  DISK WRITE  SWAPIN     IO>    COMMAND                
 9986 be/4 root        0.00 B/s  262.05 K/s  0.00 % 99.86 % cp file /mnt/tmp/
20651 be/4 root       51.77 K/s  238.95 K/s  0.00 % 93.23 % [file-storage]

可以采取哪些措施来改善g_mass_storage仿真USB驱动器的性能？

PS：我正在使用内核

$ uname -rm
3.2.0-4-686-pae i686

Answer 1

同样在这里。

在6点的一个晚上后，我找到了解决方案。

modprobe g_mass_storage file=/home/del/img/flash stall=0 buflen=65536

这最多可达5MByte / sec

modprobe g_mass_storage file=/home/del/img/flash stall=0 nofua=1

这最多可达11MByte / sec

＆＃34; buflen＆＃34;的组合和＆＃34; nofua＆＃34;没有真正的帮助。关于＆＃34; nufua＆＃34;在这里阅读：http://lxr.free-electrons.com/source/drivers/usb/gadget/file_storage.c?v=3.5

Ultrasoft /

g_mass_storage虚拟usb设备的性能非常低

1 个答案: