我有一张我从V2移植到V3的地图，我正在尝试更新代码以在设定的时间刷新KML数据。在这种情况下，每30秒。它只是假设更新地图上的数据并显示下次更新发生时的倒计时。
这是一个可以在V2中工作的工作版本。
以下是我更新的V3脚本中的相关代码，但它无效。我没有收到任何错误，所以我不确定我做错了什么。这是在V2工作，但我不能让它与V3一起工作。我错过了什么，忽略了什么？
//This calls genkml.php on every refresh cycle to generate a new kml file
function UpdateKML() {
//document.getElementById('TheDiv').innerHTML = '0';
var xmlhttp=false;
if (!xmlhttp && typeof XMLHttpRequest!='undefined') {
try {
xmlhttp = new XMLHttpRequest();
} catch (e) {
xmlhttp=false;
}
}
if (!xmlhttp && window.createRequest) {
try {
xmlhttp = window.createRequest();
} catch (e) {
xmlhttp=false;
}
}
xmlhttp.open("GET", "genkml.php?force=" + force + "&ofd=" + KMLdate + "&nsd=" + NSdate + "&dbg=" + dbg + "&rand="+(new Date()).valueOf(),true);
xmlhttp.onreadystatechange=function() {
if (xmlhttp.readyState==4) {
var resp = xmlhttp.responseText;
//if (resp === undefined) resp = ''; // If we get a bad response, just set resp to nothing
if (dbg == 'y') { // Check if we want debug info
var tmpresp = resp;
if (tmpresp === undefined) tmpresp = ' ';
if (document.getElementById('div1') == null) { // Check if debug div exists, if not add it to end of body
var divTag = document.createElement("div");
divTag.id = "div1";
divTag.innerHTML = 'Response Status: ' + xmlhttp.status + '<br />' + tmpresp;
document.body.appendChild(divTag);
} else { // Otherwise just update the info
document.getElementById('div1').innerHTML = 'Response Status: ' + xmlhttp.status + '<br />' + tmpresp;
}
} else { // Else check if debug div exists and remove it (will take an update to remove
if (document.getElementById('div1') != null) document.body.removeChild(document.getElementById("div1"));
}
if (resp !== undefined) { // Make sure we got data
KMLdate = resp.split("|")[0].split("~")[0];
NSdate = resp.split("|")[0].split("~")[1];
updateHTML(resp); // This calls the updateHTML function if there is info returned
}
}
}
xmlhttp.send(null);
// add back overlays
nyLayer = new google.maps.KmlLayer(null);
nyLayer.setMap(null); // Remove overlays
var nyLayer = new google.maps.KmlLayer(URLToKML + "?rand="+(new Date()).valueOf(),
{
suppressInfoWindows: false,
map: map,
preserveViewport: true,
zIndex: 999
});
// Time overlayed on map - could be in updateHTML() to just show when .kml read last
var time = CurrentTime ("B", "12a", true, TZOffset)
document.getElementById('currenttime').innerHTML = time;
}
function CurrentTime (type, hours, secs, ofs) {
/*
type (char) hours (char) secs (bool) ofs (num)
"U"-UTC "24"=24 hr time true=hh:mm:ss 0=hours from UTC
"B"-User's Browser "12"=12 hr time false=hh:mm
"S"-Web Site "12a"=am/pm
*/
if (type == null){ type = "B"; } // These are the defaults
if (hours == null){ hours = "12a"; }
if (secs == null){ secs = true; }
if (ofs == null){ ofs = 0; }
var currentHour = 0;
var currentMinute = 0;
var currentSecond = 0;
var time = 0;
var currentDate = new Date();
if (type == "U") {
currentHour = currentDate.getUTCHours(); // UTC
} else if (type == "B") {
currentHour = currentDate.getHours(); // Viewer's time
} else {
currentHour = currentDate.getUTCHours() + ofs; // your local time
if(currentHour < 0) { currentHour = currentHour + 24;}
}
currentMinute = currentDate.getMinutes();
currentMinute = (currentMinute < 10 ? "0" : "") + currentMinute;
if (hours == "24") {
if(currentHour == 24) { currentHour = 0 }; // use if wanting 24 hour time
currentHour = (currentHour < 10 ? "0" : "") + currentHour;
} else if (hours == "12") {
if(currentHour == 0) currentHour = 12;
currentHour = (currentHour < 10 ? "0" : "") + currentHour;
} else {
if(currentHour == 0) currentHour = 12; // else no leading zero for am/pm
}
time = currentHour + ":" + currentMinute;
if (secs) {
currentSecond = currentDate.getSeconds();
currentSecond = (currentSecond < 10 ? "0" : "") + currentSecond;
time = time + ":" + currentSecond;
}
if (hours == "12a") {
time = time + " " + (currentHour > 12 ? "PM" : "AM");
}
return time;
}
//This function is only used if you leave the debug checkbox below
// You can remove this function and the checkbox and set the debug
// mode using the dbg=y query parameter
function debug(obj){
if (obj.checked) {
dbg='y';
} else {
dbg='n';
if (document.getElementById('div1') != null) document.body.removeChild(document.getElementById("div1"));
//document.getElementById('TheDiv').innerHTML = '';
}
}
//This function is only used if you leave the Force Update checkbox below
// You can remove this function and the checkbox and set the force
// mode using the force=y query parameter
function forceupdate(obj){
if (obj.checked) {
force='y';
} else {
force='n';
}
}
//This function parses out the query parameter value
function gup( name ){
name = name.replace(/[\[]/,"\\\[").replace(/[\]]/,"\\\]");
var regexS = "[\\?&]"+name+"=([^&#]*)";
var regex = new RegExp( regexS );
var results = regex.exec( window.location.href );
if( results == null )
return "";
else
return results[1];
}
如果有人需要查看，这里是V3的完整.js地图代码的链接。
编辑：我认为这与我想要移除的代码片段有关，然后将更新后的KML数据添加到地图中。
这是在V2现在已经折旧了。
// add back overlays
map.removeOverlay(geoXml); //Remove overlays
geoXml = new GGeoXml(URLToKML + "?rand="+(new Date()).valueOf() ); //rand is used to trick google maps into thinking this is a new KML (don't use cache version)
map.addOverlay(geoXml); //Add the new data from the newly generated KML
代码我更新了V3，取代了通过搜索找到的上述折旧的V2代码段。不确定这是否正确，但这是我能找到的。
// add back overlays
nyLayer = new google.maps.KmlLayer(null);
nyLayer.setMap(null); // Remove overlays
function refresh(layer) {
var nyLayer = new google.maps.KmlLayer(URLToKML + "?rand="+(new Date()).valueOf(),
{
suppressInfoWindows: false,
map: map,
preserveViewport: true,
zIndex: 999
});
}
答案 0 :(得分：1)
我对它进行了分类和工作，我知道这是一个简单的编辑，但我很难找到解决方案。如果其他任何人可以帮助这就是我所做的。
在V2版本中更改了此内容。
updateHTML(resp); //This calls the updateHTML function if there is info returned
}
}
}
xmlhttp.send(null);
// add back overlays
map.removeOverlay(geoXml); //Remove overlays
geoXml = new GGeoXml(URLToKML + "?rand="+(new Date()).valueOf() ); //rand is used to trick google maps into thinking this is a new KML (don't use cache version)
map.addOverlay(geoXml); //Add the new data from the newly generated KML
V3版本中的这个。
updateHTML(resp); // This calls the updateHTML function if there is info returned
}
//remove layer
window.nyLayer.setMap(null);
//change its url so that we would force the google to refetch data
window.nyLayer.url = URLToKML + "?rand="+(new Date()).valueOf();
//and re-add layer
window.nyLayer.setMap(window.map);
}
}
xmlhttp.send(null);
map.removeOverlay和map.addOverlay在V3中已经过折旧，因此我花了很长时间才找到替代品。
答案 1 :(得分：1)
或者您可以进一步简化它并使用：
window.nyLayer.url = URLToKML + '&ver=' + Date.now();