Question

我正在尝试使用python和amp;来自动执行完整的CTS设置和执行。 Ubuntu上的monkeyrunner，其中大部分都进展顺利。作为最后一步，我尝试执行以下python命令在特定设备上启动CTS：

cts_tradefed_script = "./android-cts/tools/cts-tradefed"
process = subprocess.Popen([cts_tradefed_script, "run", "cts", "-s", '"' + serialno + '"', "--plan", "CTS"], shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)

相当于：

./android-cts/tools/cts-tradefed run cts -s "R32CB054TSZ" --plan CTS

在命令行中，我得到：

Android CTS 4.2_r4
No commands for non-interactive mode; exiting.
06-17 17:32:32 I/: Detected new device R32CB054TSZ
Saved log to /tmp/tradefed_global_log_9173619073367947049.txt
06-17 17:32:32 I/CommandScheduler: All done

CTS测试不执行。是否存在我忘记的命令，或者使用Python是不可能的？

Answer 1

cts_tradefed_script = "./android-cts/tools/cts-tradefed"
process = subprocess.Popen([cts_tradefed_script + " " + serialno], shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)

编辑：没有必要使用脚本。只需将所有内容输入为串联字符串即可。

Answer 2

非交互式的问题是，您只能运行一个命令，所以您应该尝试以交互式模式运行。

要以交互方式运行，这是一种方法：

#pip install paramiko
import paramiko
import time

def run_remote_command(channel, command):
  channel.send(command)
  whole_output = ""
  while True:
    if channel.recv_ready():
      output = channel.recv(1024)
      whole_output+=output
    else:
      time.sleep(0.5)
      if not(channel.recv_ready()):
        return whole_output

server ="fill you own here"
username = "fill you own here"
password = "fill you own here"
ssh = paramiko.SSHClient()
ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy())
ssh.connect(server, 22 ,username, password)
channel =ssh.get_transport().open_session()
channel.get_pty()
channel.invoke_shell()


run_1 =run_remote_command(channel,"~/android/out/host/linux-x86/cts/android-cts/tools/cts-tradefed list devices" + "\n")
print run_1

run_2 =run_remote_command(channel,"run cts" + "\n")
print run_2

run_3 =run_remote_command(channel,"l i" + "\n")
print run_3

使用python自动化android CTS

2 个答案: