Question

我有一个存储过程的层次结构，如下所示：

1
 2
  3

现在我在做的是：首先，我展示了最低级别的第3级sp。

CREATE proc [dbo].[proc_tblUserScheduleNewUpdateOnly] 
(      
@Scheduleid bigint=258,                            
@Contactid uniqueidentifier='EDE3E474-02CA-49C7-86DD-AA97794ECF8A',                                     
@ScheduleDate datetime= '2012-07-16 00:00:00.000',                                    
@StartTime varchar(20)='12:03:00.0000000',                                    
@EndTime varchar(20)='15:00:00.0000000',                                    
@Location bigint=8,                                    
@Area bigint=7,                                    
@Room bigint=9,                        
@Enddate datetime='2012-07-16 00:00:00.000',                    
@CurrentTime Datetime='2012-07-16 12:00:35.900',      
@ModifiedBy uniqueidentifier='0BF84A77-FAC2-44E5-AF9B-39740415DBD2',                  
@schedulefileidNew bigint=''         
)      
as      
Declare @schedulefileid bigint      
if @schedulefileidNew=0                
 begin                
   set @schedulefileid=null                
 end                
else                
 begin                
set @schedulefileid=@schedulefileidNew                
end       
update tblUserScheduleNew   set Contactid=@Contactid,      
ScheduleDate =@ScheduleDate,      
StartTime = @StartTime,      
EndTime =@EndTime,      
Location =@Location,      
Area=@Area,      
Room =@Room,      
LastModifiedDate=@CurrentTime ,EndDate=@Enddate,      
ModifiedBy=@ModifiedBy,      
ScheduleFileId=@schedulefileid      
where ScheduleId=@Scheduleid and IsDeleted=0 and isActive=1      
select 1

现在是第二级：

CREATE Proc [dbo].[proc_tblUserScheduleNewFutureUpdate]
(          
@StartDatePassed datetime='8/2/2012 12:00:00 AM',       
@EndDatePassed datetime='8/2/2012 12:00:00 AM', --='2012-07-11 00:00:00.000',          
@StartTimePassed varchar(20)='13:00:00',--='02:00:00.0000000',          
@EndTimePassed varchar(20)='21:00:00',--='03:00:00.0000000',          
@CurrentDateTime Datetime ='8/1/2012 5:50:31 AM', --='2012-07-11 02:07:35.900'          
@Scheduleid bigint=0x0000000000000166,          
@Contactid uniqueidentifier='77680636-bc4b-4489-9cec-3bc000ffe773',          
@Location bigint=11,          
@Area bigint=10,          
@Room bigint=11,          
@ModifiedBy uniqueidentifier='acf7961c-4111-49ad-a66a-ce7f9ce131bd',          
@schedulefileidNew bigint=null         
)          
as  
declare @ResultForInsertUpdate varchar(200);  
if CONVERT(date,@StartDatePassed,101)>CONVERT(date,@CurrentDateTime,101) and     
CONVERT(date,@EndDatePassed,101)>CONVERT(date,@CurrentDateTime,101) and
 CONVERT(date,@EndDatePassed,101)>CONVERT(date,@StartDatePassed,101)           
  begin -- it will run when the Start date and end date passed are greater than Current date and EndDate is greater than Start date.          
Print 'Update'          
exec @ResultForInsertUpdate =  dbo.proc_tblUserScheduleNewUpdateOnly @Scheduleid,@Contactid,@StartDatePassed,@StartTimePassed,@EndTimePassed,@Location,@Area,@Room,@EndDatePassed,@CurrentDateTime,@ModifiedBy,@schedulefileidNew          
select @ResultForInsertUpdate;  
  end          
else
begin
select 2
end

现在是第3级和最后级

Alter Proc proc_tblUserScheduleNewUpdateWithAllRoomsOption
(
@StartDatePassed datetime='2013-04-29 00:00:00.000',
@EndDatePassed datetime='2013-04-29 00:00:00.000',
@StartTimePassed varchar(20)='15:00:00',
@EndTimePassed varchar(20)='20:00:00',
@CurrentDateTime Datetime ='2013-04-25 00:00:00.000',
@Scheduleid bigint=1,
@Contactid uniqueidentifier='FD3E0DDF-8B91-493F-94DF-B8280AC33BC0',
@Location bigint=17,
@Area bigint=0,
@Room bigint=0,
@ModifiedBy uniqueidentifier='ACF7961C-4111-49AD-A66A-CE7F9CE131BD',
@schedulefileidNew bigint=null,
@OldStartDate Datetime='2013-04-26 00:00:00.000',
@OldEndDate DateTime='2013-04-26 00:00:00.000',
@OldStartTime varchar(20)='11:11:11.0000000',
@OldEndTime varchar(20)='22:22:22.0000000',
@OldContactid uniqueidentifier='DA101C1D-45A1-4F9A-B19B-4E88DDE01B10',
@OldLocation bigint=18,
@OldArea bigint=17,
@OldRoom bigint=22
)
as
-- declare variables Starts here       
declare @row_count int;        
DECLARE @intFlag INT=0;      
declare @locationIdForLoop bigint  ;      
declare @AreaIdForLoop bigint  ;      
declare @RoomIdForLoop bigint  ;   
DECLARE @ResultForInsertUpdate INT      
set @ResultForInsertUpdate=1;
-- declare tempraroy table to store location, Area and rooms Starts here      
CREATE TABLE  #tempTable (      
RowNum int,        
LocationId bigint,
AreaId bigint,
RoomId bigint
)
-- declare tempraroy table to store location, Area and rooms Ends here
if @Area=0 and @Room=0
begin
insert into #tempTable (RowNum,LocationId,AreaId,RoomId) (select ROW_NUMBER() OVER 
(ORDER BY LocationId desc) RowNum, LocationId,AreaId,RoomId from
tblroomnew where areaid in(select Areaid from tblareanew where locationid=@Location))
set @row_count=(select count(*) from #tempTable)
SET @intFlag = 1
WHILE (@intFlag <=@row_count)
BEGIN
-- Do what ever you want to do here
set @locationIdForLoop=(select locationid from #tempTable where RowNum=@intFlag)
set @AreaIdForLoop=(select areaid from #tempTable where RowNum=@intFlag)
set @RoomIdForLoop=(select roomid from #tempTable where RowNum=@intFlag)
if @ResultForInsertUpdate=1
begin
if exists(select 1 from tbluserschedulenew where 
convert(datetime,ScheduleDate,101)=convert(datetime,@OldStartDate,101) and
Convert(datetime,EndDate,101)=convert(datetime,@OldEndDate,101) and 
convert(Time,StartTime,108)=convert(Time,@OldStartTime,108) and
convert(Time,EndTime,108) =convert(Time,@OldEndTime,108) and contactid=@OldContactid 
and
Location=@OldLocation and Area=@OldArea and Room=@OldRoom )
begin
Print 'Update First record'
exec @ResultForInsertUpdate = proc_tblUserScheduleNewFutureUpdate @StartDatePassed,@EndDatePassed,@StartTimePassed,@EndTimePassed,@CurrentDateTime,@Scheduleid,@Contactid,
@locationIdForLoop,@AreaIdForLoop,@RoomIdForLoop,@ModifiedBy,@schedulefileidNew
--set @ResultForInsertUpdate=1
print @ResultForInsertUpdate
--select @ResultForInsertUpdate
end
else
begin
print 'insert karna hai record'
exec  proc_tblUserScheduleNewLatestInsert @Contactid,@StartDatePassed,@StartTimePassed,@EndTimePassed,
@locationIdForLoop,@AreaIdForLoop,@RoomIdForLoop, @EndDatePassed,@ModifiedBy,0,@CurrentDateTime
--print @ResultForInsertUpdate
end
end
else
begin
select @ResultForInsertUpdate
end
SET @intFlag = @intFlag + 1
END
end
else
begin
if @Area!=0 and @Room=0
begin
insert into #tempTable (RowNum,LocationId,AreaId,RoomId) (select ROW_NUMBER() OVER (ORDER BY LocationId desc) RowNum, LocationId,AreaId,RoomId from
tblroomnew where areaid =@Area)
set @row_count=(select count(*) from #tempTable)
end
else
begin
print 'chalan do jo chal reha'
exec proc_tblUserScheduleNewFutureUpdate @StartDatePassed,@EndDatePassed,@StartTimePassed,@EndTimePassed,@CurrentDateTime,@Scheduleid,@Contactid,
 @location,@Area,@Room,@ModifiedBy,@schedulefileidNew
--print 'simple update'
end
end

现在我的问题是什么：

我选择1作为第3级的结果，将在第二级存储在“ @ResultForInsertUpdate ”中，再次存储在第3级...

我在@ResultForInsertUpdate中得到0我不知道为什么，请帮我解决这个问题

Answer 1

这可能对你有所帮助 -

<强> 1

CREATE PROCEDURE [dbo].[proc_tblUserScheduleNewUpdateOnly]
(
      @Scheduleid BIGINT
    , @Contactid UNIQUEIDENTIFIER
    , @ScheduleDate DATETIME
    , @StartTime VARCHAR(20)
    , @EndTime VARCHAR(20)
    , @Location BIGINT
    , @Area BIGINT
    , @Room BIGINT
    , @Enddate DATETIME
    , @CurrentTime DATETIME
    , @ModifiedBy UNIQUEIDENTIFIER
    , @schedulefileidNew BIGINT
)
AS BEGIN

    UPDATE dbo.tblUserScheduleNew
    SET     
          Contactid = @Contactid 
        , ScheduleDate = @ScheduleDate 
        , StartTime = @StartTime 
        , EndTime = @EndTime 
        , location = @Location 
        , Area = @Area 
        , Room = @Room 
        , LastModifiedDate = @CurrentTime 
        , EndDate = @Enddate 
        , ModifiedBy = @ModifiedBy 
        , ScheduleFileId = NULLIF(@schedulefileidNew, 0)
    WHERE ScheduleID = @Scheduleid 
        AND IsDeleted = 0
        AND isActive = 1

    RETURN 1

END

2。

CREATE PROCEDURE [dbo].[proc_tblUserScheduleNewFutureUpdate] 
(
      @StartDatePassed DATETIME
    , @EndDatePassed DATETIME
    , @StartTimePassed VARCHAR(20)
    , @EndTimePassed VARCHAR(20)
    , @CurrentDateTime DATETIME
    , @Scheduleid BIGINT
    , @Contactid UNIQUEIDENTIFIER
    , @Location BIGINT
    , @Area BIGINT
    , @Room BIGINT
    , @ModifiedBy UNIQUEIDENTIFIER
    , @schedulefileidNew BIGINT
)
AS BEGIN

    IF 
          CONVERT(DATE, @StartDatePassed, 101) > CONVERT(DATE, @CurrentDateTime, 101) 
        AND
          CONVERT(DATE, @EndDatePassed, 101) > CONVERT(DATE, @CurrentDateTime, 101) 
        AND
          CONVERT(DATE, @EndDatePassed, 101) > CONVERT(DATE, @StartDatePassed, 101)

    BEGIN    

        DECLARE @ResultForInsertUpdate VARCHAR(200)

        EXEC @ResultForInsertUpdate = dbo.proc_tblUserScheduleNewUpdateOnly 
                @Scheduleid
            ,   @Contactid
            ,   @StartDatePassed
            ,   @StartTimePassed
            ,   @EndTimePassed
            ,   @Location
            ,   @Area
            ,   @Room
            ,   @EndDatePassed
            ,   @CurrentDateTime
            ,   @ModifiedBy
            ,   @schedulefileidNew

        RETURN @ResultForInsertUpdate

    END
    ELSE BEGIN

        RETURN 2

    END

END

第3

CREATE PROCEDURE proc_tblUserScheduleNewUpdateWithAllRoomsOption ( @StartDatePassed DATETIME, @EndDatePassed DATETIME, @StartTimePassed VARCHAR(20), @EndTimePassed VARCHAR(20), @CurrentDateTime DATETIME, @Scheduleid BIGINT, @Contactid UNIQUEIDENTIFIER, @Location BIGINT, @Area BIGINT, @Room BIGINT, @ModifiedBy UNIQUEIDENTIFIER, @schedulefileidNew BIGINT, @OldStartDate DATETIME, @OldEndDate DATETIME, @OldStartTime VARCHAR(20), @OldEndTime VARCHAR(20), @OldContactid UNIQUEIDENTIFIER, @OldLocation BIGINT, @OldArea BIGINT, @OldRoom BIGINT ) AS BEGIN DECLARE @row_count INT , @intFlag INT = 0 , @locationIdForLoop BIGINT , @AreaIdForLoop BIGINT , @RoomIdForLoop BIGINT , @ResultForInsertUpdate INT = 1 CREATE TABLE #tempTable (RowNum INT, LocationId BIGINT, AreaId BIGINT, RoomId BIGINT) IF @Area = 0 AND @Room = 0 BEGIN INSERT INTO #tempTable (RowNum, LocationId, AreaId, RoomId) SELECT ROW_NUMBER() OVER (ORDER BY LocationId DESC) RowNum , LocationId , AreaId , RoomId FROM dbo.tblroomnew a WHERE a.AreaId IN ( SELECT b.AreaId FROM dbo.tblareanew b WHERE b.LocationId = @Location ) SELECT @row_count = COUNT(1) , @intFlag = 1 FROM #tempTable WHILE (@intFlag <= @row_count) BEGIN SELECT @locationIdForLoop = LocationId , @AreaIdForLoop = AreaId , @RoomIdForLoop = RoomId FROM #tempTable WHERE RowNum=@intFlag IF @ResultForInsertUpdate = 1 BEGIN IF EXISTS ( SELECT 1 FROM dbo.tbluserschedulenew WHERE CONVERT(DATETIME,ScheduleDate,101)=CONVERT(DATETIME,@OldStartDate,101) AND CONVERT(DATETIME,EndDate,101)=CONVERT(DATETIME,@OldEndDate,101) AND CONVERT(TIME,StartTime,108)=CONVERT(TIME,@OldStartTime,108) AND CONVERT(TIME,EndTime,108)=CONVERT(TIME,@OldEndTime,108) AND contactid=@OldContactid AND location=@OldLocation AND Area=@OldArea AND Room=@OldRoom ) BEGIN PRINT 'Update First record' EXEC @ResultForInsertUpdate=proc_tblUserScheduleNewFutureUpdate @StartDatePassed , @EndDatePassed , @StartTimePassed , @EndTimePassed , @CurrentDateTime , @Scheduleid , @Contactid , @locationIdForLoop , @AreaIdForLoop , @RoomIdForLoop , @ModifiedBy , @schedulefileidNew RETURN @ResultForInsertUpdate END ELSE BEGIN EXEC proc_tblUserScheduleNewLatestInsert @Contactid , @StartDatePassed , @StartTimePassed , @EndTimePassed , @locationIdForLoop , @AreaIdForLoop , @RoomIdForLoop , @EndDatePassed , @ModifiedBy , 0 , @CurrentDateTime END END ELSE BEGIN RETURN @ResultForInsertUpdate END SELECT @intFlag = @intFlag + 1 END END ELSE BEGIN IF @Area != 0 AND @Room = 0 BEGIN INSERT INTO #tempTable (RowNum, LocationId, AreaId, RoomId) SELECT ROW_NUMBER() OVER (ORDER BY LocationId DESC) RowNum , LocationId , AreaId , RoomId FROM dbo.tblroomnew a SELECT @row_count = COUNT(1) FROM #tempTable END ELSE BEGIN EXEC dbo.proc_tblUserScheduleNewFutureUpdate @StartDatePassed , @EndDatePassed , @StartTimePassed , @EndTimePassed , @CurrentDateTime , @Scheduleid , @Contactid , @location , @Area , @Room , @ModifiedBy , @schedulefileidNew END END END

无法在变量中获取存储过程的结果？

1 个答案: