FlowMonitor不显示统计信息，但PyViz和跟踪文件显示它
有一个简单的数据传输模型。
/* -*- Mode:C++; c-file-style:"gnu"; indent-tabs-mode:nil; -*- */
#include <iostream>
#include <fstream>
#include <string>
#include <cassert>
#include "ns3/core-module.h"
#include "ns3/network-module.h"
#include "ns3/csma-module.h"
#include "ns3/internet-module.h"
#include "ns3/point-to-point-module.h"
#include "ns3/applications-module.h"
#include "ns3/ipv4-global-routing-helper.h"
#include "ns3/flow-monitor-module.h"
//
// Network Topology
//
// n0 (source)
// |
// |
// |
// |
// |
// -------------------n1 n2 n3--------n4 n5 n6 (sink)
// point-to-point | | | | | |
// 10.1.1.0 ================== ==========
// LAN 10.1.2.0 LAN 10.1.3.0
// (CSMA subnet 1) (CSMA subnet 2)
using namespace ns3;
int main (int argc, char *argv[])
{
Config::SetDefault ( "ns3::OnOffApplication::PacketSize", UintegerValue ( 700 ) );
Config::SetDefault ( "ns3::OnOffApplication::DataRate", StringValue ( "1000000" ) );
CommandLine cmd;
cmd.Parse(argc,argv);
NodeContainer p2pNodes;
p2pNodes.Create(2);
NodeContainer csmaNodesSubNetOne;
csmaNodesSubNetOne.Add(p2pNodes.Get(1));
csmaNodesSubNetOne.Create(2);
NodeContainer csmaNodesSubNetTwo;
csmaNodesSubNetTwo.Add(csmaNodesSubNetOne.Get(2));
csmaNodesSubNetTwo.Create(2);
PointToPointHelper pointToPoint;
pointToPoint.SetDeviceAttribute("DataRate", StringValue ("100Mbps"));
pointToPoint.SetDeviceAttribute("Mtu", UintegerValue(1000));
pointToPoint.SetChannelAttribute("Delay", TimeValue (NanoSeconds (6560)));
NetDeviceContainer p2pDevices;
p2pDevices = pointToPoint.Install(p2pNodes);
CsmaHelper csmaHelperSubNetOne;
csmaHelperSubNetOne.SetChannelAttribute("DataRate", StringValue ("100Mbps"));
csmaHelperSubNetOne.SetChannelAttribute("Delay", TimeValue (NanoSeconds (6560)));
csmaHelperSubNetOne.SetDeviceAttribute("Mtu", UintegerValue(1000));
NetDeviceContainer csmaDevicesSubNetOne;
csmaDevicesSubNetOne = csmaHelperSubNetOne.Install(csmaNodesSubNetOne);
CsmaHelper csmaHelperSubNetTwo;
csmaHelperSubNetTwo.SetChannelAttribute("DataRate", StringValue ("100Mbps"));
csmaHelperSubNetTwo.SetChannelAttribute("Delay", TimeValue (NanoSeconds (6560)));
csmaHelperSubNetTwo.SetDeviceAttribute("Mtu", UintegerValue(1000));
NetDeviceContainer csmaDevicesSubNetTwo;
csmaDevicesSubNetTwo = csmaHelperSubNetTwo.Install(csmaNodesSubNetTwo);
InternetStackHelper internetStackHelper;
internetStackHelper.Install(p2pNodes.Get(0));
internetStackHelper.Install(csmaNodesSubNetOne.Get(0));
internetStackHelper.Install(csmaNodesSubNetOne.Get(1));
internetStackHelper.Install(csmaNodesSubNetTwo.Get(0));
internetStackHelper.Install(csmaNodesSubNetTwo.Get(1));
internetStackHelper.Install(csmaNodesSubNetTwo.Get(2));
Ipv4AddressHelper address;
address.SetBase ("10.1.1.0", "255.255.255.0");
Ipv4InterfaceContainer p2pInterfaces;
p2pInterfaces = address.Assign (p2pDevices);
address.SetBase ("10.1.2.0", "255.255.255.0");
Ipv4InterfaceContainer csmaInterfacesSubNetOne;
csmaInterfacesSubNetOne = address.Assign (csmaDevicesSubNetOne);
address.SetBase ("10.1.3.0", "255.255.255.0");
Ipv4InterfaceContainer csmaInterfacesSubNetTwo;
csmaInterfacesSubNetTwo = address.Assign (csmaDevicesSubNetTwo);
InetSocketAddress dst = InetSocketAddress ( csmaInterfacesSubNetTwo.GetAddress ( 2 ) );
OnOffHelper onoff = OnOffHelper ( "ns3::Ipv4RawSocketFactory", dst );
ApplicationContainer apps = onoff.Install( p2pNodes.Get(0) );
apps.Start ( Seconds (2.0) );
apps.Stop ( Seconds (10.0) );
PacketSinkHelper sink = PacketSinkHelper ("ns3::Ipv4RawSocketFactory", dst);
apps = sink.Install (csmaNodesSubNetTwo.Get( 2 ));
apps.Start (Seconds (1.0));
apps.Stop (Seconds (10.0));
Ipv4GlobalRoutingHelper::PopulateRoutingTables( );
csmaHelperSubNetTwo.EnablePcap ("sniffer", csmaDevicesSubNetTwo.Get (1), true);
AsciiTraceHelper ascii;
csmaHelperSubNetTwo.EnableAsciiAll( ascii.CreateFileStream( "receiver-trace.tr" ) );
Simulator::Stop (Seconds (11));
FlowMonitorHelper flowmon;
Ptr<FlowMonitor> monitor = flowmon.InstallAll();
monitor = flowmon.GetMonitor();
Simulator::Run ();
monitor->CheckForLostPackets ();
Ptr<Ipv4FlowClassifier> classifier = DynamicCast<Ipv4FlowClassifier> (flowmon.GetClassifier ());
std::map<FlowId, FlowMonitor::FlowStats> stats = monitor->GetFlowStats ();
for(std::map<FlowId, FlowMonitor::FlowStats>::const_iterator i = stats.begin (); i != stats.end (); ++i)
{
Ipv4FlowClassifier::FiveTuple t = classifier->FindFlow (i->first);
std::cout << " Flow " << i->first << " (" << t.sourceAddress << " -> " << t.destinationAddress << ")\n";
std::cout << " Tx Bytes: " << i->second.txBytes << "\n";
std::cout << " Rx Bytes: " << i->second.rxBytes << "\n";
std::cout << " Throughput: " << i->second.rxBytes * 8.0 / 10.0 / 1024 / 1024 << " Mbps\n";
}
monitor->SerializeToXmlFile("serialize-stat.flowmon", true, true);
Simulator::Destroy();
return 0;
}
我可以构建并运行此模型，并在PyViz中查看结果。
同样在PyViz中，我看到了节点接收器的统计信息。
跟踪文件包含数据。这是大跟踪文件中的一行。
...
r 3.00585 /NodeList/5/DeviceList/0/$ns3::CsmaNetDevice/MacRx ns3::EthernetHeader ( length/type=0x800, source=00:00:00:00:00:06, destination=00:00:00:00:00:08) ns3::Ipv4Header (tos 0x0 DSCP Default ECN Not-ECT ttl 62 id 0 protocol 0 offset (bytes) 0 flags [none] length: 720 10.1.1.1 > 10.1.3.3) Payload (size=700) ns3::EthernetTrailer (fcs=0)
...
我可以使用AWK解析此跟踪文件。
[root@localhost ns-3.16]# awk '{print $2 ", " $28}' receiver-trace.tr >grab.dat
[root@localhost ns-3.16]# cat grab.dat
...
3.00578, 720
3.00578, 720
3.00585, 720
3.01126, 720
3.01126, 720
3.01133, 720
3.01133, 720
3.01133, 720
3.0114, 720
3.01686, 720
3.01686, 720
3.01693, 720
3.01693, 720
3.01693, 720
3.017, 720
3.02246, 720
...
但是FlowMonitor没有显示，xml文件没有有用的信息。
<?xml version="1.0" ?>
<FlowMonitor>
<FlowStats>
</FlowStats>
<Ipv4FlowClassifier>
</Ipv4FlowClassifier>
<FlowProbes>
<FlowProbe index="0">
</FlowProbe>
<FlowProbe index="1">
</FlowProbe>
<FlowProbe index="2">
</FlowProbe>
<FlowProbe index="3">
</FlowProbe>
<FlowProbe index="4">
</FlowProbe>
<FlowProbe index="5">
</FlowProbe>
</FlowProbes>
</FlowMonitor>
可能是什么原因？
1 个答案:
答案 0 :(得分：1)
作为替代方案，可以使用回调。
...
static void PrintRx ( Ptr< const Packet > p, const Address &ad )
{
std::string traceLine = boost::lexical_cast< string >( *p );
std::cout << Simulator::Now().GetSeconds () << " " << traceLine << std::endl;
}
int main (int argc, char *argv[])
{
...
Config::ConnectWithoutContext ("/NodeList/*/ApplicationList/0/$ns3::PacketSink/Rx", MakeCallback (&PrintRx));
Packet::EnablePrinting ();
...
如下图所示，可以查看收到的数据包的内容，然后创建自己的统计分析工具。
...
19.881 ns3::Ipv4Header (tos 0x0 DSCP Default ECN Not-ECT ttl 62 id 3192 protocol 2 offset (bytes) 0 flags [none] length: 720 10.1.1.1 > 10.1.3.3) Payload (size=700)
19.8866 ns3::Ipv4Header (tos 0x0 DSCP Default ECN Not-ECT ttl 62 id 3193 protocol 2 offset (bytes) 0 flags [none] length: 720 10.1.1.1 > 10.1.3.3) Payload (size=700)
19.8922 ns3::Ipv4Header (tos 0x0 DSCP Default ECN Not-ECT ttl 62 id 3194 protocol 2 offset (bytes) 0 flags [none] length: 720 10.1.1.1 > 10.1.3.3) Payload (size=700)
19.8978 ns3::Ipv4Header (tos 0x0 DSCP Default ECN Not-ECT ttl 62 id 3195 protocol 2 offset (bytes) 0 flags [none] length: 720 10.1.1.1 > 10.1.3.3) Payload (size=700)
19.9034 ns3::Ipv4Header (tos 0x0 DSCP Default ECN Not-ECT ttl 62 id 3196 protocol 2 offset (bytes) 0 flags [none] length: 720 10.1.1.1 > 10.1.3.3) Payload (size=700)
...
相关问题
最新问题
- 我写了这段代码，但我无法理解我的错误
- 我无法从一个代码实例的列表中删除 None 值，但我可以在另一个实例中。为什么它适用于一个细分市场而不适用于另一个细分市场？
- 是否有可能使 loadstring 不可能等于打印？卢阿
- java中的random.expovariate()
- Appscript 通过会议在 Google 日历中发送电子邮件和创建活动
- 为什么我的 Onclick 箭头功能在 React 中不起作用？
- 在此代码中是否有使用“this”的替代方法？
- 在 SQL Server 和 PostgreSQL 上查询，我如何从第一个表获得第二个表的可视化
- 每千个数字得到
- 更新了城市边界 KML 文件的来源？