只需遵循本教程：http://www.venkysblog.com/setup-django-on-windows-with-apache-and-mysql（在https://docs.djangoproject.com/en/1.4/howto/deployment/wsgi/modwsgi/的帮助下）
我很高兴并设置到第5阶段，其中以下两行导致我的浏览器出现“问题加载页面”错误消息：
LoadModule wsgi_module modules/mod_wsgi.so
WSGIScriptAlias / c:/wamp/www/testproject/django.wsgi
WSGIPythonPath c:/wamp/www/testproject
我把我的django文件夹放在www目录下，django.wsgi作为上面的文件目录建议（看起来像......）
import os, sys
sys.path.append('c:/wamp/www/')
os.environ['DJANGO_SETTINGS_MODULE'] = 'testproject.settings'
import django.core.handlers.wsgi
application = django.core.handlers.wsgi.WSGIHandler()
有没有其他人在这里遇到问题或者知道我哪里可能出错？
P.S。为了完整性，我的完整httpd.conf如下所示 - 请告诉我是否应该回复更多文件
p.p.s。我已经尝试了WSGIScriptAlias / WSGIPythonPath上路径周围的引号的所有变体 - 所需的组合是什么？
的httpd.conf：
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "c:/wamp/bin/apache/apache2.2.22"
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 0.0.0.0:80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule php5_module "c:/wamp/bin/php/php5.3.13/php5apache2_2.dll"
LoadModule wsgi_module modules/mod_wsgi.so
WSGIScriptAlias / "c:/wamp/www/testproject/django.wsgi"
WSGIPythonPath "c:/wamp/www/testproject"
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin admin@localhost
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "c:/wamp/www/"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "c:/wamp/www/">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride all
#
# Controls who can get stuff from this server.
#
# onlineoffline tag - don't remove
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.php index.php3 index.html index.htm
</IfModule>
<Directory c:/wamp/www/testproject>
<Files wsgi.py>
Order deny,allow
Allow from all
</Files>
</Directory>
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "c:/wamp/logs/apache_error.log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "c:/wamp/logs/access.log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://localhost/bar
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "cgi-bin/"
</IfModule>
<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>
#
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-httpd-php .php
AddType application/x-httpd-php .php3
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Include "c:/wamp/alias/*"
Apache错误日志：
[Tue Mar 05 14:34:34 2013] [notice] Child 2020: Exit event signaled. Child process is ending.
[Tue Mar 05 14:34:35 2013] [notice] Child 2020: Released the start mutex
[Tue Mar 05 14:34:36 2013] [notice] Child 2020: All worker threads have exited.
[Tue Mar 05 14:34:36 2013] [notice] Child 2020: Child process is exiting
[Tue Mar 05 14:34:36 2013] [notice] Parent: Child process exited successfully.
[Tue Mar 05 16:01:21 2013] [notice] Apache/2.2.22 (Win64) PHP/5.3.13 configured -- resuming normal operations
[Tue Mar 05 16:01:21 2013] [notice] Server built: May 13 2012 19:41:17
[Tue Mar 05 16:01:21 2013] [notice] Parent: Created child process 5228
[Tue Mar 05 16:01:21 2013] [notice] Child 5228: Child process is running
[Tue Mar 05 16:01:21 2013] [notice] Child 5228: Acquired the start mutex.
[Tue Mar 05 16:01:21 2013] [notice] Child 5228: Starting 64 worker threads.
[Tue Mar 05 16:01:21 2013] [notice] Child 5228: Starting thread to listen on port 80.
[Tue Mar 05 16:01:40 2013] [error] [client 127.0.0.1] client denied by server configuration: C:/apache2, referer: http://localhost/testproject/
[Tue Mar 05 16:01:40 2013] [error] [client 127.0.0.1] client denied by server configuration: C:/apache2, referer: http://localhost/testproject/
[Tue Mar 05 16:01:40 2013] [error] [client 127.0.0.1] client denied by server configuration: C:/apache2, referer: http://localhost/testproject/
[Tue Mar 05 16:01:40 2013] [error] [client 127.0.0.1] client denied by server configuration: C:/apache2, referer: http://localhost/testproject/
[Tue Mar 05 16:01:40 2013] [error] [client 127.0.0.1] client denied by server configuration: C:/apache2, referer: http://localhost/testproject/
[Tue Mar 05 16:07:25 2013] [error] [client 127.0.0.1] PHP Notice: Undefined offset: 0 in C:\\wamp\\apps\\webgrind1.0\\index.php on line 28, referer: http://localhost/webgrind/
[Tue Mar 05 16:07:25 2013] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://localhost/webgrind/
[Tue Mar 05 16:07:25 2013] [error] [client 127.0.0.1] PHP 1. {main}() C:\\wamp\\apps\\webgrind1.0\\index.php:0, referer: http://localhost/webgrind/
[Tue Mar 05 16:07:25 2013] [error] [client 127.0.0.1] PHP Fatal error: Uncaught exception 'Exception' with message 'Could not open C:\\wamp\\tmp/ for reading.' in C:\\wamp\\apps\\webgrind1.0\\library\\Preprocessor.php:49\nStack trace:\n#0 C:\\wamp\\apps\\webgrind1.0\\library\\FileHandler.php(171): Webgrind_Preprocessor::parse('C:\\wamp\\tmp/', 'C:\\Windows\\Temp...')\n#1 C:\\wamp\\apps\\webgrind1.0\\index.php(30): Webgrind_FileHandler->getTraceReader(NULL, 'percent')\n#2 {main}\n thrown in C:\\wamp\\apps\\webgrind1.0\\library\\Preprocessor.php on line 49, referer: http://localhost/webgrind/
[Tue Mar 05 16:07:33 2013] [error] [client 127.0.0.1] PHP Notice: Undefined offset: 0 in C:\\wamp\\apps\\webgrind1.0\\index.php on line 28, referer: http://localhost/webgrind/
[Tue Mar 05 16:07:33 2013] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://localhost/webgrind/
[Tue Mar 05 16:07:33 2013] [error] [client 127.0.0.1] PHP 1. {main}() C:\\wamp\\apps\\webgrind1.0\\index.php:0, referer: http://localhost/webgrind/
[Tue Mar 05 16:07:33 2013] [error] [client 127.0.0.1] PHP Fatal error: Uncaught exception 'Exception' with message 'Could not open C:\\wamp\\tmp/ for reading.' in C:\\wamp\\apps\\webgrind1.0\\library\\Preprocessor.php:49\nStack trace:\n#0 C:\\wamp\\apps\\webgrind1.0\\library\\FileHandler.php(171): Webgrind_Preprocessor::parse('C:\\wamp\\tmp/', 'C:\\Windows\\Temp...')\n#1 C:\\wamp\\apps\\webgrind1.0\\index.php(30): Webgrind_FileHandler->getTraceReader(NULL, 'percent')\n#2 {main}\n thrown in C:\\wamp\\apps\\webgrind1.0\\library\\Preprocessor.php on line 49, referer: http://localhost/webgrind/
[Tue Mar 05 16:07:38 2013] [notice] Parent: Received shutdown signal -- Shutting down the server.
[Tue Mar 05 16:07:38 2013] [notice] Child 5228: Exit event signaled. Child process is ending.
[Tue Mar 05 16:07:39 2013] [notice] Child 5228: Released the start mutex
[Tue Mar 05 16:07:40 2013] [notice] Child 5228: All worker threads have exited.
[Tue Mar 05 16:07:40 2013] [notice] Child 5228: Child process is exiting
[Tue Mar 05 16:07:40 2013] [notice] Parent: Child process exited successfully.
[Tue Mar 05 16:45:41 2013] [notice] Apache/2.2.22 (Win64) PHP/5.3.13 configured -- resuming normal operations
[Tue Mar 05 16:45:41 2013] [notice] Server built: May 13 2012 19:41:17
[Tue Mar 05 16:45:42 2013] [notice] Parent: Created child process 5320
[Tue Mar 05 16:45:42 2013] [notice] Child 5320: Child process is running
[Tue Mar 05 16:45:42 2013] [notice] Child 5320: Acquired the start mutex.
[Tue Mar 05 16:45:42 2013] [notice] Child 5320: Starting 64 worker threads.
[Tue Mar 05 16:45:42 2013] [notice] Child 5320: Starting thread to listen on port 80.
[Tue Mar 05 16:46:15 2013] [notice] Parent: Received shutdown signal -- Shutting down the server.
[Tue Mar 05 16:46:15 2013] [notice] Child 5320: Exit event signaled. Child process is ending.
[Tue Mar 05 16:46:16 2013] [notice] Child 5320: Released the start mutex
[Tue Mar 05 16:46:17 2013] [notice] Child 5320: All worker threads have exited.
[Tue Mar 05 16:46:17 2013] [notice] Child 5320: Child process is exiting
[Tue Mar 05 16:46:17 2013] [notice] Parent: Child process exited successfully.
[Tue Mar 05 16:46:18 2013] [notice] Apache/2.2.22 (Win64) PHP/5.3.13 configured -- resuming normal operations
[Tue Mar 05 16:46:18 2013] [notice] Server built: May 13 2012 19:41:17
[Tue Mar 05 16:46:19 2013] [notice] Parent: Created child process 4556
[Tue Mar 05 16:46:19 2013] [notice] Child 4556: Child process is running
[Tue Mar 05 16:46:19 2013] [notice] Child 4556: Acquired the start mutex.
[Tue Mar 05 16:46:19 2013] [notice] Child 4556: Starting 64 worker threads.
[Tue Mar 05 16:46:19 2013] [notice] Child 4556: Starting thread to listen on port 80.
[Tue Mar 05 16:47:23 2013] [notice] Parent: Received shutdown signal -- Shutting down the server.
[Tue Mar 05 16:47:23 2013] [notice] Child 4556: Exit event signaled. Child process is ending.
[Tue Mar 05 16:47:24 2013] [notice] Child 4556: Released the start mutex
[Tue Mar 05 16:47:25 2013] [notice] Child 4556: All worker threads have exited.
[Tue Mar 05 16:47:25 2013] [notice] Child 4556: Child process is exiting
[Tue Mar 05 16:47:25 2013] [notice] Parent: Child process exited successfully.