Question

如果我的进程控制/ dev / ttyS2在串行端口上收到BREAK，我想收到SIGINT。我从shell运行这个程序。从我发现的只是“终端是前台进程组的控制终端，它将导致SIGINT被发送到这个前台进程组”我尝试制作进程终端的控制器，但它失败了。

#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <fcntl.h>
#include <termios.h> 
#include <errno.h>
#include <stdio.h>
#include <signal.h>
#include <string.h>

#define BAUDRATE B115200
#define MODEMDEVICE "/dev/ttyS2"
#define _POSIX_SOURCE 1 /* POSIX compliant source */
#define FALSE 0
#define TRUE 1


__sighandler_t sighandle(int signum, __sighandler_t h) { 
    fprintf(stderr, "BREAK DETECTED\n"); 
    signal(SIGINT, (__sighandler_t) sighandle); 
    return SIG_IGN; 
}
volatile int STOP=FALSE; 

int    main()
{
    int fd,c, res;
    struct termios oldtio,newtio;
    char buf[255];
    pid_t  pid; 
    signal(SIGINT, (__sighandler_t) sighandle);

    fd = open(MODEMDEVICE, O_RDWR | O_NOCTTY ); 
    if (fd <0) {perror(MODEMDEVICE); return (-1); }


    tcgetattr(fd,&oldtio); /* save current port settings */

    memset(&newtio, 0,sizeof(newtio));
    newtio.c_cflag |= BAUDRATE | CRTSCTS | CS8 | CLOCAL | CREAD | BRKINT;
    newtio.c_iflag &= ~IGNBRK ;
    newtio.c_oflag = 0;

    /* set input mode (non-canonical, no echo,...) */
    newtio.c_lflag = 0;

    newtio.c_cc[VTIME]    = 0;   /* inter-character timer unused */
    newtio.c_cc[VMIN]     = 1;   /* blocking read until 5 chars received */

    tcflush(fd, TCIFLUSH);
    tcsetattr(fd,TCSANOW,&newtio);

    if( ioctl(fd, TIOCSCTTY, 1) <0 )
    {
        printf("Error number: %d\n", errno);
    }
   if ( tcsetpgrp(fd, tcgetpgrp(0) ) < 0 )
   {
   syslog(LOG_PERROR,"tcsetpgrp failed: %d " ,errno);
   syslog(LOG_PERROR,"EBADF is %d " ,EBADF);    
   syslog(LOG_PERROR,"EINVAL is %d " ,EINVAL);
   syslog(LOG_PERROR,"ENOTTY is %d " ,ENOTTY);    
   syslog(LOG_PERROR,"EPERM is %d " ,EPERM);  
   }
    while (STOP==FALSE) {       /* loop for input */
        res = read(fd,buf,255);   /* returns after 5 chars have been input */
        buf[res]=0;               /* so we can printf... */

        printf(":%s:%d\n", buf, res);
        if (buf[0]=='z') {STOP=TRUE;}
    }
    tcsetattr(fd,TCSANOW,&oldtio);
    return 0;
}

Answer 1

我终于找到了问题的答案。我正在使用自定义板，所以它不必总是工作但是当正确配置串口时，用户可以通过串口获得cat / proc / tty / device / serial的断点数，这是我希望得到的那种功能

Answer 2

#define _POSIX_SOURCE 1除非在#include之前，否则无效。

使用C99编译器，您可以#include <stdbool.h>代替#define您自己的TRUE和FALSE。

/* from signal.h, */
typedef void(*sighandler_t)(int);
/* which means the handler must be declared thusly */
void sighandle(int);
/* as a result, no casting is necessary */
sighandler_t p_sighandle = &sighandle;

前台进程组由tcsetpgrp设置，您似乎缺少该文件。

Linux接收ttycontrol程序的信号中断

2 个答案: