使用超时重试Bash命令

Question

如何重试bash命令，直到状态正常或达到超时为止？

我最好的镜头（我正在寻找更简单的东西）：

NEXT_WAIT_TIME=0
COMMAND_STATUS=1
until [ $COMMAND_STATUS -eq 0 || $NEXT_WAIT_TIME -eq 4 ]; do
  command
  COMMAND_STATUS=$?
  sleep $NEXT_WAIT_TIME
  let NEXT_WAIT_TIME=NEXT_WAIT_TIME+1
done

Answer 1

您可以通过将command置于测试中并稍微改变一点来简化一些事情。否则脚本看起来很好：

NEXT_WAIT_TIME=0
until command || [ $NEXT_WAIT_TIME -eq 4 ]; do
   sleep $(( NEXT_WAIT_TIME++ ))
done

Answer 2

组合一些工具。

重试：https://github.com/kadwanev/retry

超时：http://manpages.courier-mta.org/htmlman1/timeout.1.html

然后看魔术

retry timeout 3 ping google.com

PING google.com (173.194.123.97): 56 data bytes
64 bytes from 173.194.123.97: icmp_seq=0 ttl=55 time=13.982 ms
64 bytes from 173.194.123.97: icmp_seq=1 ttl=55 time=44.857 ms
64 bytes from 173.194.123.97: icmp_seq=2 ttl=55 time=64.187 ms
Before retry #1: sleeping 0.3 seconds
PING google.com (173.194.123.103): 56 data bytes
64 bytes from 173.194.123.103: icmp_seq=0 ttl=55 time=56.549 ms
64 bytes from 173.194.123.103: icmp_seq=1 ttl=55 time=60.220 ms
64 bytes from 173.194.123.103: icmp_seq=2 ttl=55 time=8.872 ms
Before retry #2: sleeping 0.6 seconds
PING google.com (173.194.123.103): 56 data bytes
64 bytes from 173.194.123.103: icmp_seq=0 ttl=55 time=25.819 ms
64 bytes from 173.194.123.103: icmp_seq=1 ttl=55 time=16.382 ms
64 bytes from 173.194.123.103: icmp_seq=2 ttl=55 time=3.224 ms
Before retry #3: sleeping 1.2 seconds
PING google.com (173.194.123.103): 56 data bytes
64 bytes from 173.194.123.103: icmp_seq=0 ttl=55 time=58.438 ms
64 bytes from 173.194.123.103: icmp_seq=1 ttl=55 time=94.828 ms
64 bytes from 173.194.123.103: icmp_seq=2 ttl=55 time=61.075 ms
Before retry #4: sleeping 2.4 seconds
PING google.com (173.194.123.103): 56 data bytes
64 bytes from 173.194.123.103: icmp_seq=0 ttl=55 time=43.361 ms
64 bytes from 173.194.123.103: icmp_seq=1 ttl=55 time=32.171 ms
...

检查退出状态是否为最终通过/失败。

Answer 3

重试功能来自：

http://fahdshariff.blogspot.com/2014/02/retrying-commands-in-shell-scripts.html

#!/bin/bash

# Retries a command on failure.
# $1 - the max number of attempts
# $2... - the command to run
retry() {
    local -r -i max_attempts="$1"; shift
    local -r cmd="$@"
    local -i attempt_num=1

    until $cmd
    do
        if (( attempt_num == max_attempts ))
        then
            echo "Attempt $attempt_num failed and there are no more attempts left!"
            return 1
        else
            echo "Attempt $attempt_num failed! Trying again in $attempt_num seconds..."
            sleep $(( attempt_num++ ))
        fi
    done
}

# example usage:
retry 5 ls -ltr foo

如果你想在你的脚本中重试一个函数，你应该这样做：

# example usage:
foo()
{
   #whatever you want do.
}

declare -fxr foo
retry 3 timeout 60 bash -ce 'foo'

Answer 4

我对this作出了一些调整，使您可以打开是否已达到超时或命令是否成功。另外，在此版本中，每秒重试一次：

ELAPSED=0
started=$(mktemp)
echo "False" > $started
until the_command_here && echo "True" > $started || [ $ELAPSED -eq 30 ]
do
   sleep 1
   (( ELAPSED++ ))
done

if [[ $(cat $started) == "True" ]]                                                                                                                                                                                                                            
then                                                                                                                    
    echo "the command completed after $ELAPSED seconds"                                                                                              
else                                                                                                                    
    echo "timed out after $ELAPSED seconds"                                                                               
    exit 111                                                                                                            
fi

Answer 5

一行最短，也许是最好的方法：

timeout 12h bash -c 'until ssh root@mynewvm; do sleep 10; done'

由http://jeromebelleman.gitlab.io/posts/devops/until/

授予