我刚刚实现了转录音频文件的转录演示 .. 我的音频文件是.wav文件，其中只包含“BHAVIK”“ANKIT”等名称 “SAGAR”
我的语法文件由以下语法组成： -
public =（JAY）|（SAGAR）|（BHAVIK）|（ANKIT）|（MIRAJ）|（YAGNESH）;
但问题是抄录员演示没有提供正确的结果.. 当我给“JAY”的.wav文件时，只是给我一些其他的东西..不给 正确的结果..
为什么会这样？ 我的.wav文件在这里你可以听到..
http://www.crocko.com/62E9703E57844AE6B7A172D5CBBB8DE3/Vocaroo_s0dmd1kxVSfJ.wav
请帮帮我...... 提前致谢 我已经在adnroid中实现了这样的逻辑......我使用一个类名作为extaudiorecorder。
公共类ExtAudioRecorder
{ private final static int [] sampleRates = {44100,22050,11025,16000};
public static ExtAudioRecorder getInstanse(Boolean recordingCompressed)
{
ExtAudioRecorder result = null;
if(recordingCompressed)
{
result = new ExtAudioRecorder( false,
AudioSource.MIC,
sampleRates[3],
AudioFormat.CHANNEL_CONFIGURATION_MONO,
AudioFormat.ENCODING_PCM_16BIT);
}
else
{
int i=0;
do
{
result = new ExtAudioRecorder( true,
AudioSource.MIC,
sampleRates[i],
AudioFormat.CHANNEL_CONFIGURATION_MONO,
AudioFormat.ENCODING_PCM_16BIT);
} while((++i<sampleRates.length) & !(result.getState() == ExtAudioRecorder.State.INITIALIZING));
}
return result;
}
/**
* INITIALIZING : recorder is initializing;
* READY : recorder has been initialized, recorder not yet started
* RECORDING : recording
* ERROR : reconstruction needed
* STOPPED: reset needed
*/
public enum State {INITIALIZING, READY, RECORDING, ERROR, STOPPED};
public static final boolean RECORDING_UNCOMPRESSED = true;
public static final boolean RECORDING_COMPRESSED = false;
// The interval in which the recorded samples are output to the file
// Used only in uncompressed mode
private static final int TIMER_INTERVAL = 120;
// Toggles uncompressed recording on/off; RECORDING_UNCOMPRESSED / RECORDING_COMPRESSED
private boolean rUncompressed;
// Recorder used for uncompressed recording
private AudioRecord audioRecorder = null;
// Recorder used for compressed recording
private MediaRecorder mediaRecorder = null;
// Stores current amplitude (only in uncompressed mode)
private int cAmplitude= 0;
// Output file path
private String filePath = null;
// Recorder state; see State
private State state;
// File writer (only in uncompressed mode)
private RandomAccessFile randomAccessWriter;
// Number of channels, sample rate, sample size(size in bits), buffer size, audio source, sample size(see AudioFormat)
private short nChannels;
private int sRate;
private short bSamples;
private int bufferSize;
private int aSource;
private int aFormat;
// Number of frames written to file on each output(only in uncompressed mode)
private int framePeriod;
// Buffer for output(only in uncompressed mode)
private byte[] buffer;
// Number of bytes written to file after header(only in uncompressed mode)
// after stop() is called, this size is written to the header/data chunk in the wave file
private int payloadSize;
/**
*
* Returns the state of the recorder in a RehearsalAudioRecord.State typed object.
* Useful, as no exceptions are thrown.
*
* @return recorder state
*/
public State getState()
{
return state;
}
/*
*
* Method used for recording.
*
*/
private AudioRecord.OnRecordPositionUpdateListener updateListener = new AudioRecord.OnRecordPositionUpdateListener()
{
public void onPeriodicNotification(AudioRecord recorder)
{
audioRecorder.read(buffer, 0, buffer.length); // Fill buffer
try
{
randomAccessWriter.write(buffer); // Write buffer to file
payloadSize += buffer.length;
if (bSamples == 16)
{
for (int i=0; i<buffer.length/2; i++)
{ // 16bit sample size
short curSample = getShort(buffer[i*2], buffer[i*2+1]);
if (curSample > cAmplitude)
{ // Check amplitude
cAmplitude = curSample;
}
}
}
else
{ // 8bit sample size
for (int i=0; i<buffer.length; i++)
{
if (buffer[i] > cAmplitude)
{ // Check amplitude
cAmplitude = buffer[i];
}
}
}
}
catch (IOException e)
{
Log.e(ExtAudioRecorder.class.getName(), "Error occured in updateListener, recording is aborted");
//stop();
}
}
public void onMarkerReached(AudioRecord recorder)
{
// NOT USED
}
};
/**
*
*
* Default constructor
*
* Instantiates a new recorder, in case of compressed recording the parameters can be left as 0.
* In case of errors, no exception is thrown, but the state is set to ERROR
*
*/
public ExtAudioRecorder(boolean uncompressed, int audioSource, int sampleRate, int channelConfig, int audioFormat)
{
try
{
rUncompressed = uncompressed;
if (rUncompressed)
{ // RECORDING_UNCOMPRESSED
if (audioFormat == AudioFormat.ENCODING_PCM_16BIT)
{
bSamples = 16;
}
else
{
bSamples = 8;
}
if (channelConfig == AudioFormat.CHANNEL_CONFIGURATION_MONO)
{
nChannels = 1;
}
else
{
nChannels = 2;
}
aSource = audioSource;
sRate = sampleRate;
aFormat = audioFormat;
framePeriod = sampleRate * TIMER_INTERVAL / 1000;
bufferSize = framePeriod * 2 * bSamples * nChannels / 8;
if (bufferSize < AudioRecord.getMinBufferSize(sampleRate, channelConfig, audioFormat))
{ // Check to make sure buffer size is not smaller than the smallest allowed one
bufferSize = AudioRecord.getMinBufferSize(sampleRate, channelConfig, audioFormat);
// Set frame period and timer interval accordingly
framePeriod = bufferSize / ( 2 * bSamples * nChannels / 8 );
Log.w(ExtAudioRecorder.class.getName(), "Increasing buffer size to " + Integer.toString(bufferSize));
}
audioRecorder = new AudioRecord(audioSource, sampleRate, channelConfig, audioFormat, bufferSize);
if (audioRecorder.getState() != AudioRecord.STATE_INITIALIZED)
throw new Exception("AudioRecord initialization failed");
audioRecorder.setRecordPositionUpdateListener(updateListener);
audioRecorder.setPositionNotificationPeriod(framePeriod);
} else
{ // RECORDING_COMPRESSED
mediaRecorder = new MediaRecorder();
mediaRecorder.setAudioSource(MediaRecorder.AudioSource.MIC);
mediaRecorder.setOutputFormat(MediaRecorder.OutputFormat.THREE_GPP);
mediaRecorder.setAudioEncoder(MediaRecorder.AudioEncoder.AMR_NB);
}
cAmplitude = 0;
filePath = null;
state = State.INITIALIZING;
} catch (Exception e)
{
if (e.getMessage() != null)
{
Log.e(ExtAudioRecorder.class.getName(), e.getMessage());
}
else
{
Log.e(ExtAudioRecorder.class.getName(), "Unknown error occured while initializing recording");
}
state = State.ERROR;
}
}
/**
* Sets output file path, call directly after construction/reset.
*
* @param output file path
*
*/
public void setOutputFile(String argPath)
{
try
{
if (state == State.INITIALIZING)
{
filePath = argPath;
if (!rUncompressed)
{
mediaRecorder.setOutputFile(filePath);
}
}
}
catch (Exception e)
{
if (e.getMessage() != null)
{
Log.e(ExtAudioRecorder.class.getName(), e.getMessage());
}
else
{
Log.e(ExtAudioRecorder.class.getName(), "Unknown error occured while setting output path");
}
state = State.ERROR;
}
}
/**
*
* Returns the largest amplitude sampled since the last call to this method.
*
* @return returns the largest amplitude since the last call, or 0 when not in recording state.
*
*/
public int getMaxAmplitude()
{
if (state == State.RECORDING)
{
if (rUncompressed)
{
int result = cAmplitude;
cAmplitude = 0;
return result;
}
else
{
try
{
return mediaRecorder.getMaxAmplitude();
}
catch (IllegalStateException e)
{
return 0;
}
}
}
else
{
return 0;
}
}
/**
*
* Prepares the recorder for recording, in case the recorder is not in the INITIALIZING state and the file path was not set
* the recorder is set to the ERROR state, which makes a reconstruction necessary.
* In case uncompressed recording is toggled, the header of the wave file is written.
* In case of an exception, the state is changed to ERROR
*
*/
public void prepare()
{
try
{
if (state == State.INITIALIZING)
{
if (rUncompressed)
{
if ((audioRecorder.getState() == AudioRecord.STATE_INITIALIZED) & (filePath != null))
{
// write file header
randomAccessWriter = new RandomAccessFile(filePath, "rw");
randomAccessWriter.setLength(0); // Set file length to 0, to prevent unexpected behavior in case the file already existed
randomAccessWriter.writeBytes("RIFF");
randomAccessWriter.writeInt(0); // Final file size not known yet, write 0
randomAccessWriter.writeBytes("WAVE");
randomAccessWriter.writeBytes("fmt ");
randomAccessWriter.writeInt(Integer.reverseBytes(16)); // Sub-chunk size, 16 for PCM
randomAccessWriter.writeShort(Short.reverseBytes((short) 1)); // AudioFormat, 1 for PCM
randomAccessWriter.writeShort(Short.reverseBytes(nChannels));// Number of channels, 1 for mono, 2 for stereo
randomAccessWriter.writeInt(Integer.reverseBytes(sRate)); // Sample rate
randomAccessWriter.writeInt(Integer.reverseBytes(sRate*bSamples*nChannels/8)); // Byte rate, SampleRate*NumberOfChannels*BitsPerSample/8
randomAccessWriter.writeShort(Short.reverseBytes((short)(nChannels*bSamples/8))); // Block align, NumberOfChannels*BitsPerSample/8
randomAccessWriter.writeShort(Short.reverseBytes(bSamples)); // Bits per sample
randomAccessWriter.writeBytes("data");
randomAccessWriter.writeInt(0); // Data chunk size not known yet, write 0
buffer = new byte[framePeriod*bSamples/8*nChannels];
state = State.READY;
}
else
{
Log.e(ExtAudioRecorder.class.getName(), "prepare() method called on uninitialized recorder");
state = State.ERROR;
}
}
else
{
mediaRecorder.prepare();
state = State.READY;
}
}
else
{
Log.e(ExtAudioRecorder.class.getName(), "prepare() method called on illegal state");
release();
state = State.ERROR;
}
}
catch(Exception e)
{
if (e.getMessage() != null)
{
Log.e(ExtAudioRecorder.class.getName(), e.getMessage());
}
else
{
Log.e(ExtAudioRecorder.class.getName(), "Unknown error occured in prepare()");
}
state = State.ERROR;
}
}
/**
*
*
* Releases the resources associated with this class, and removes the unnecessary files, when necessary
*
*/
public void release()
{
if (state == State.RECORDING)
{
stop();
}
else
{
if ((state == State.READY) & (rUncompressed))
{
try
{
randomAccessWriter.close(); // Remove prepared file
}
catch (IOException e)
{
Log.e(ExtAudioRecorder.class.getName(), "I/O exception occured while closing output file");
}
(new File(filePath)).delete();
}
}
if (rUncompressed)
{
if (audioRecorder != null)
{
audioRecorder.release();
}
}
else
{
if (mediaRecorder != null)
{
mediaRecorder.release();
}
}
}
/**
*
*
* Resets the recorder to the INITIALIZING state, as if it was just created.
* In case the class was in RECORDING state, the recording is stopped.
* In case of exceptions the class is set to the ERROR state.
*
*/
public void reset()
{
try
{
if (state != State.ERROR)
{
release();
filePath = null; // Reset file path
cAmplitude = 0; // Reset amplitude
if (rUncompressed)
{
audioRecorder = new AudioRecord(aSource, sRate, nChannels+1, aFormat, bufferSize);
}
else
{
mediaRecorder = new MediaRecorder();
mediaRecorder.setAudioSource(MediaRecorder.AudioSource.MIC);
mediaRecorder.setOutputFormat(MediaRecorder.OutputFormat.THREE_GPP);
mediaRecorder.setAudioEncoder(MediaRecorder.AudioEncoder.AMR_NB);
}
state = State.INITIALIZING;
}
}
catch (Exception e)
{
Log.e(ExtAudioRecorder.class.getName(), e.getMessage());
state = State.ERROR;
}
}
/**
*
*
* Starts the recording, and sets the state to RECORDING.
* Call after prepare().
*
*/
public void start()
{
if (state == State.READY)
{
if (rUncompressed)
{
payloadSize = 0;
audioRecorder.startRecording();
audioRecorder.read(buffer, 0, buffer.length);
}
else
{
mediaRecorder.start();
}
state = State.RECORDING;
}
else
{
Log.e(ExtAudioRecorder.class.getName(), "start() called on illegal state");
state = State.ERROR;
}
}
/**
*
*
* Stops the recording, and sets the state to STOPPED.
* In case of further usage, a reset is needed.
* Also finalizes the wave file in case of uncompressed recording.
*
*/
public void stop()
{
if (state == State.RECORDING)
{
if (rUncompressed)
{
audioRecorder.stop();
try
{
randomAccessWriter.seek(4); // Write size to RIFF header
randomAccessWriter.writeInt(Integer.reverseBytes(36+payloadSize));
randomAccessWriter.seek(40); // Write size to Subchunk2Size field
randomAccessWriter.writeInt(Integer.reverseBytes(payloadSize));
randomAccessWriter.close();
}
catch(IOException e)
{
Log.e(ExtAudioRecorder.class.getName(), "I/O exception occured while closing output file");
state = State.ERROR;
}
}
else
{
mediaRecorder.stop();
}
state = State.STOPPED;
}
else
{
Log.e(ExtAudioRecorder.class.getName(), "stop() called on illegal state");
state = State.ERROR;
}
}
/*
*
* Converts a byte[2] to a short, in LITTLE_ENDIAN format
*
*/
private short getShort(byte argB1, byte argB2)
{
return (short)(argB1 | (argB2 << 8));
}
}
我在我的主要活动中使用该课程如此...按下按钮时录制声音并在另一个按钮上停止点击
package com.test.android_recorder;
import android.os.Bundle;
import android.os.Environment;
import android.app.Activity;
import android.view.Menu;
import android.widget.Button;
import android.widget.TextView;
import android.view.View;
import android.view.View.OnClickListener;
public class AndroidRecorder extends Activity {
ExtAudioRecorder extAudioRecorder;
@Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(com.test.android_recorder.R.layout.activity_android_recorder);
Button button = (Button) findViewById(R.id.button1);
Button buttonstop = (Button) findViewById(R.id.buttonstop);
// Start recording
extAudioRecorder = ExtAudioRecorder.getInstanse(true);
button.setOnClickListener(new OnClickListener()
{
public void onClick(View v)
{
TextView txt1=(TextView)findViewById(com.test.android_recorder.R.id.textView1);
txt1.setText("Button clciked");
// Compressed recording (AMR)
//extAudioRecorder = ExtAudioRecorder.getInstanse(false); // Uncompressed recording (WAV)
extAudioRecorder.setOutputFile(Environment.getExternalStorageDirectory().getAbsolutePath() + "/javarecorder");
extAudioRecorder.prepare();
extAudioRecorder.start();
// ImageView iv = (ImageView) findViewById(R.id.imageview1);
//iv.setVisibility(View.VISIBLE);
}
});
buttonstop.setOnClickListener(new OnClickListener()
{
public void onClick(View v)
{
//TextView txt1=(TextView)findViewById(com.test.android_recorder.R.id.textView1);
// txt1.setText("Button clciked");
// ImageView iv = (ImageView) findViewById(R.id.imageview1);
//iv.setVisibility(View.VISIBLE);
// Stop recording
extAudioRecorder.stop();
extAudioRecorder.release();
}
});
/*
*/
}
@Override
public boolean onCreateOptionsMenu(Menu menu) {
getMenuInflater().inflate(com.test.android_recorder.R.menu.activity_android_recorder, menu);
return true;
}
}
When i run this code then nothing is happening and in logcat i have following error
Start() called in illegel state.
preapare() called in illegel state.
stop() called in illegel state.
Please Help me Out
答案 0 :(得分：3)
我见过的一个问题是，将Wav文件与其他识别器一起使用会导致文件必须采用支持的格式。 WAV是一种通用文件类型，可以支持不同格式的音频（样本大小，单声道/立体声，不同的采样率等）。识别器不如媒体播放器灵活，因此您必须确保您的wav文件采用识别器处理的格式。
http://cmusphinx.sourceforge.net/wiki/faq说：
准确性差的主要原因是：
- 传入音频的采样率不匹配。肯定是 16khz 16bit单声道小端文件。你需要修正的采样率 重新采样的来源。验证采样率以便测试。
如果您的文件不是此格式，则可以使用Audacity
重新取样顺便说一句，我无法使用QuickTime或Windows Media播放器播放您的wav文件。它的格式或编码是什么？