Question

正如标题所说，在具有多个IP环境的多个以太网接口中，默认的Django测试服务器没有连接到我可以从我的PC访问的网络。有没有办法指定Django测试服务器应该使用的接口？

- 已添加 -

网络配置在这里。我通过我的电脑上的143.248.x.y地址连接到机器。（我的电脑也在143.248.a.b网络。）但我找不到这个地址。正常的apache以及在其他端口上运行的其他自定义守护进程非常有效。

配置这台机器的人不是我，所以我不太了解网络的细节......

eth0      Link encap:Ethernet  HWaddr 00:15:17:88:97:78
          inet addr:192.168.6.100  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::215:17ff:fe88:9778/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:441917680 errors:0 dropped:0 overruns:0 frame:0
          TX packets:357190979 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:191664873035 (178.5 GB)  TX bytes:324846526526 (302.5 GB)

eth1      Link encap:Ethernet  HWaddr 00:15:17:88:97:79
          inet addr:172.10.1.100  Bcast:172.10.1.255  Mask:255.255.255.0
          inet6 addr: fe80::215:17ff:fe88:9779/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1113794891 errors:0 dropped:97 overruns:0 frame:0
          TX packets:699821135 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:843942929141 (785.9 GB)  TX bytes:838436421169 (780.8 GB)
          Base address:0x2000 Memory:b8800000-b8820000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1085510396 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1085510396 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:422100792153 (393.1 GB)  TX bytes:422100792153 (393.1 GB)

peth0     Link encap:Ethernet  HWaddr 00:15:17:88:97:78
          inet6 addr: fe80::215:17ff:fe88:9778/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:441918386 errors:0 dropped:742 overruns:0 frame:0
          TX packets:515286699 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:199626686230 (185.9 GB)  TX bytes:337365591758 (314.1 GB)
          Base address:0x2020 Memory:b8820000-b8840000

veth0     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

veth1     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

veth2     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

veth3     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

vif0.0    Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

vif0.1    Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

vif0.2    Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

vif0.3    Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

- 添加（2） -

最后我使用w3m（在终端上运行的文本模式Web浏览器）从localhost连接。：P

Answer 1

我认为OP指的是在测试机器上配置了多个接口。

您可以指定Django将绑定的IP地址，如下所示：

# python manage.py runserver 0.0.0.0:8000

这会将Django绑定到端口8000上的所有接口。您可以传递任何活动的IP地址来代替0.0.0.0，因此只需使用要绑定的接口的IP地址。

希望这有帮助。

Answer 2

是的，如果您的接口的IP是例如192.168.1.2并且您想在端口8080上运行，请启动开发服务器，如下所示：

./manage.py runserver 192.168.1.2:8080

Answer 3

没有。这不是它的工作原理。 interfase有一个IP地址，你有一个与测试服务器和你的PC的网络。您应该连接到该IP（可能使用您指定的备用端口），这就是全部。如果您在网络中只有这两个设备，则它们很可能都具有静态IP地址。（或者，如果没有相互网络，则无法相互连接）。

如何指定Django测试服务器应该监听哪个eth接口？

3 个答案: