Question

这个让我难过。

我的驱动程序在所有来宾虚拟系统（Windows xp / 7 x86和x64）以及一些特定主机上运行良好。

然而，在我的 PC上，当我在OSRLoader中启动驱动程序时，我正在收到一个0x7E停止代码。

是的，Testsigning和调试模式都已启用。

这是一些转储信息（警告，巨大）：

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffff80000003, The exception code that was not handled
Arg2: fffff88000c0af0f, The address that the exception occurred at
Arg3: fffff88002fb1d78, Exception Record Address
Arg4: fffff88002fb15e0, Context Record Address

Debugging Details:
------------------


EXCEPTION_CODE: (HRESULT) 0x80000003 (2147483651) - One or more arguments are invalid

FAULTING_IP: 
CI!CiValidateImageHeader+167
fffff880`00c0af0f cc              int     3

EXCEPTION_RECORD:  fffff88002fb1d78 -- (.exr 0xfffff88002fb1d78)
ExceptionAddress: fffff88000c0af0f (CI!CiValidateImageHeader+0x0000000000000167)
   ExceptionCode: 80000003 (Break instruction exception)
  ExceptionFlags: 00000000
NumberParameters: 1
   Parameter[0]: 0000000000000000

CONTEXT:  fffff88002fb15e0 -- (.cxr 0xfffff88002fb15e0)
rax=0000000000000000 rbx=00000000000000ff rcx=1748c3f2dac60000
rdx=0000000000000008 rsi=fffff88002fb2100 rdi=00000000c0000428
rip=fffff88000c0af0f rsp=fffff88002fb1fb0 rbp=0000000000000000
 r8=0000000000000001  r9=fffff80002d0bbe0 r10=fffff80002e4a900
r11=fffff88002fb1fa8 r12=0000000000006000 r13=fffff98018700000
r14=fffffa8002621520 r15=0000000000000001
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00000282
CI!CiValidateImageHeader+0x167:
fffff880`00c0af0f cc              int     3
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x7E

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0x80000003 - {EXCEPTION}  Breakpoint  A breakpoint has been reached.

EXCEPTION_PARAMETER1:  0000000000000000

LAST_CONTROL_TRANSFER:  from fffff80002f35b18 to fffff88000c0af0f

STACK_TEXT:  
fffff880`02fb1fb0 fffff800`02f35b18 : 00000000`00000006 00000000`000fffff fffffa80`02621520 00000000`00000000 : CI!CiValidateImageHeader+0x167
fffff880`02fb2090 fffff800`02f3591a : 00000000`00000000 00000000`01000000 fffffa80`055e6010 00000000`00000000 : nt!SeValidateImageHeader+0x58
fffff880`02fb20d0 fffff800`0302dea2 : fffffa80`02621520 fffffa80`055e6010 00000000`00000001 00000000`00000006 : nt!MiValidateImageHeader+0x21a
fffff880`02fb21a0 fffff800`02fba3cf : fffff880`02fb2400 00000000`00000000 fffff880`02fb26b8 fffff880`02fb23f8 : nt! ?? ::NNGAKEGL::`string'+0x4e3e3
fffff880`02fb23b0 fffff800`02cce293 : fffffa80`02505b60 fffff880`02fb2658 fffff880`02fb2448 00000000`00000000 : nt!NtCreateSection+0x162
fffff880`02fb2430 fffff800`02cca830 : fffff800`030a7f16 00000000`00000000 fffff800`02fbc607 00000000`00000001 : nt!KiSystemServiceCopyEnd+0x13
fffff880`02fb2638 fffff800`030a7f16 : 00000000`00000000 fffff800`02fbc607 00000000`00000001 fffffa80`0254c518 : nt!KiServiceLinkage
fffff880`02fb2640 fffff800`030a82dc : ffffffff`80000ea4 fffffa80`00100000 fffffa80`0254c518 00000000`00000000 : nt!MmCheckSystemImage+0x96
fffff880`02fb2770 fffff800`030a84f7 : ffffffff`80000ea4 fffff800`00000001 fffff8a0`0b36c500 00000000`00000000 : nt!MiCreateSectionForDriver+0xcc
fffff880`02fb2820 fffff800`030b3d9a : 00000000`00000000 fffff880`02fb29f8 fffffa80`02505b60 fffff800`02e48e00 : nt!MiObtainSectionForDriver+0xd7
fffff880`02fb2880 fffff800`030b69bd : fffff880`02fb29f8 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MmLoadSystemImage+0x23a
fffff880`02fb29a0 fffff800`030b7375 : 00000000`00000001 00000000`00000000 00000000`00000000 fffffa80`02829388 : nt!IopLoadDriver+0x44d
fffff880`02fb2c70 fffff800`02cdc1e1 : fffff8a0`00000000 ffffffff`80000e90 fffff800`030b7320 fffffa80`02505b60 : nt!IopLoadUnloadDriver+0x55
fffff880`02fb2cb0 fffff800`02f6e6e6 : b9ce705b`ee973fcb fffffa80`02505b60 00000000`00000080 fffffa80`024ef5f0 : nt!ExpWorkerThread+0x111
fffff880`02fb2d40 fffff800`02cad566 : fffff880`009eb180 fffffa80`02505b60 fffff880`009f5f40 50320c1b`3fdc0847 : nt!PspSystemThreadStartup+0x5a
fffff880`02fb2d80 00000000`00000000 : fffff880`02fb3000 fffff880`02fad000 fffff880`02fb13f0 00000000`00000000 : nt!KiStartSystemThread+0x16


FOLLOWUP_IP: 
CI!CiValidateImageHeader+167
fffff880`00c0af0f cc              int     3

SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  CI!CiValidateImageHeader+167

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: CI

IMAGE_NAME:  CI.dll

DEBUG_FLR_IMAGE_TIMESTAMP:  4a5be01d

STACK_COMMAND:  .cxr 0xfffff88002fb15e0 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_CI!CiValidateImageHeader+167

BUCKET_ID:  X64_0x7E_CI!CiValidateImageHeader+167

Followup: MachineOwner
---------

作为顶级状态的一点点，我已经启动了/ DEBUG并且它只显示了我已经拥有的内容。

我的代码中的第一个日志甚至没有被点击：

/*
 * DriverEntry
 *  Driver entry point
 */
NTSTATUS DriverEntry(IN PDRIVER_OBJECT driver, IN PUNICODE_STRING path)
{
    // Setup vars
    UNICODE_STRING devLink, devName;
    PDEVICE_OBJECT devObj = NULL;
    NTSTATUS ntsReturn;

    // Log Entry
    LOG("Driver Entry");

    // Setup driver unload function
    driver->DriverUnload = DrvUnload;

WinDbg在其视图中没有显示任何类型。

我如何知道造成这种情况的原因？断点在未连接windbg时会导致BSOD，并且（显然）在连接时会冻结我的计算机，从而没有真正可用的数据。

Answer 1

看起来你在CI.dll中遇到了调试断言。您只需从调试器中键入g并继续加载驱动程序。

这是Windows的x64版本的默认行为。如果您不希望看到该断言，则必须在引导时使用F8并选择“禁用驱动程序签名强制”，这对于每次启动都是有效的。（每次重启时都必须这样做）。或者，您可以使用32位Windows和32位版本的驱动程序进行调试。

以下是更多信息：

http://msdn.microsoft.com/en-us/library/ff547565(v=vs.85).aspx

Windows驱动程序BugCheck 7E驱动程序加载

1 个答案: