Question

我想在生成的脚本中记录传递给cmake的参数。例如，“my-config.in”将由cmake处理，它的定义如下：

配置= “@ CMAKE_ARGS @”

在cmake之后，my-config将包含如下所示的行：

config =“ - DLINUX -DUSE_FOO = y -DCMAKE_INSTALL_PREFIX = / usr”

我尝试CMAKE_ARGS，CMAKE_OPTIONS，但失败了。没有文件提到这一点。： - （

Answer 1

我不知道提供此信息的任何变量，但您可以自己生成（带有一些附带条件）。

传递给CMake的任何-D参数都会添加到构建目录中的缓存文件CMakeCache.txt中，并在后续调用期间重新应用，而无需再次在命令行中指定。

因此，在您的示例中，如果您首先执行CMake

cmake ../.. -DCMAKE_INSTALL_PREFIX:PATH=/usr

然后你会发现随后只是运行

cmake .

仍然会将CMAKE_INSTALL_PREFIX设置为/usr

如果您要从CMAKE_ARGS查找的是从CMake的每次调用在命令行中定义的变量的完整列表，那么以下应该可以解决这个问题：

get_cmake_property(CACHE_VARS CACHE_VARIABLES)
foreach(CACHE_VAR ${CACHE_VARS})
  get_property(CACHE_VAR_HELPSTRING CACHE ${CACHE_VAR} PROPERTY HELPSTRING)
  if(CACHE_VAR_HELPSTRING STREQUAL "No help, variable specified on the command line.")
    get_property(CACHE_VAR_TYPE CACHE ${CACHE_VAR} PROPERTY TYPE)
    if(CACHE_VAR_TYPE STREQUAL "UNINITIALIZED")
      set(CACHE_VAR_TYPE)
    else()
      set(CACHE_VAR_TYPE :${CACHE_VAR_TYPE})
    endif()
    set(CMAKE_ARGS "${CMAKE_ARGS} -D${CACHE_VAR}${CACHE_VAR_TYPE}=\"${${CACHE_VAR}}\"")
  endif()
endforeach()
message("CMAKE_ARGS: ${CMAKE_ARGS}")

这有点脆弱，因为它取决于通过命令行设置的每个变量都有“无帮助，命令行中指定的变量”这一事实。指定为其HELPSTRING属性。如果CMake更改了此默认值HELPSTRING，则必须相应地更新if语句。

如果这不是您想要显示的CMAKE_ARGS，而是仅显示当前执行的参数，那么我认为没有办法可以做到这一点，无法破解CMake的源代码！但是，我希望这不是您想要的，因为每次都会有效地重新应用所有以前的命令行参数。

Answer 2

存储CMake命令行参数的一种方法是使用一个名为 ~/bin/cmake （*** 1）的包装器脚本，该脚本执行两项操作：

创建存储命令行参数的./cmake_call.sh
使用命令行参数

cmake

~/bin/cmake ＃代码如下所示

#!/usr/bin/env bash

#
# Place this file into this location: ~/bin/cmake
# (with executable rights)
#
# This is a wrapper for cmake!
# * It calls cmake -- see last line of the script
# It also:
# * Creates a file cmake_call.sh in the current directory (build-directory)
#   which stores the cmake-call with all it's cmake-flags etc.
#   (It also stores successive calls to cmake, so that you have a trace of all your cmake calls)
#
# You can simply reinvoke the last cmake commandline with: ./cmake_call.sh  !!!!!!!!!!
#
# cmake_call.sh is not created
#   when cmake is called without any flags,
#   or when it is called with flags such as --help, -E, -P, etc. (refer to NON_STORE_ARGUMENTS -- you might need to modify it to suit your needs)

SCRIPT_PATH=$(readlink -f "$BASH_SOURCE")
SCRIPT_DIR=$(dirname "$SCRIPT_PATH")

#http://stackoverflow.com/a/13864829
if [ -z ${SUDO_USER+x} ]; then
    # var SUDO_USER is unset
    user=$USER
else
    user=$SUDO_USER
fi


#http://stackoverflow.com/a/34621068
path_append ()  { path_remove $1 $2; export $1="${!1}:$2"; }
path_prepend()  { path_remove $1 $2; export $1="$2:${!1}"; }
path_remove ()  { export $1="`echo -n ${!1} | awk -v RS=: -v ORS=: '$1 != "'$2'"' | sed 's/:$//'`"; }

path_remove PATH ~/bin # when calling cmake (at the bottom of this script), do not invoke this script again!




# when called with no arguments, don't create cmake_call.sh
if [[ -z "$@" ]]; then
   cmake "$@"
   exit
fi


# variable NON_STORE_ARGUMENTS stores flags which, if any are present, cause cmake_call.sh to NOT be created
read -r -d '' NON_STORE_ARGUMENTS <<'EOF'
-E
--build
#-N
-P
--graphviz
--system-information
--debug-trycompile
#--debug-output
--help
-help
-usage
-h
-H
--version
-version
/V
--help-full
--help-manual
--help-manual-list
--help-command
--help-command-list
--help-commands
--help-module
--help-module-list
--help-modules
--help-policy
--help-policy-list
--help-policies
--help-property
--help-property-list
--help-properties
--help-variable
--help-variable-list
--help-variables
EOF

NON_STORE_ARGUMENTS=$(echo "$NON_STORE_ARGUMENTS" | head -c -1 `# remove last newline` | sed "s/^/^/g" `#begin every line with ^` | tr '\n' '|')

#echo "$NON_STORE_ARGUMENTS" ## for debug purposes

## store all the args
ARGS_STR=
for arg in "$@"; do
    if cat <<< "$arg" | grep -E -- "$NON_STORE_ARGUMENTS" &> /dev/null; then  # don't use   echo "$arg"  ....
                                                                              # since echo "-E"    does not do what you want here,
                                                                              # but   cat <<< "-E" does what you want (print minus E)
        # do not create cmake_call.sh
        cmake "$@"
        exit
    fi

    # concatenate to ARGS_STR
    ARGS_STR="${ARGS_STR}$(echo -n " \"$arg\"" | sed "s,\($(pwd)\)\(\([/ \t,:;'\"].*\)\?\)$,\$(pwd)\2,g")"
    #                                             replace $(pwd) followed by
    #                                                                  /             or
    #                                                                   whitespace   or
    #                                                                      ,         or
    #                                                                       :        or
    #                                                                        ;       or
    #                                                                         '      or
    #                                                                           "
    #                                                                    or nothing
    #                                             with \$(pwd)
done









if [[ ! -e $(pwd)/cmake_call.sh ]]; then
echo    "#!/usr/bin/env bash" >  $(pwd)/cmake_call.sh

# escaping:
# note in the HEREDOC below, \\ means \ in the output!!
#                            \$ means $ in the output!!
#                            \` means ` in the output!!
cat <<EOF                     >>  $(pwd)/cmake_call.sh


#http://stackoverflow.com/a/34621068
path_remove ()  { export \$1="\`echo -n \${!1} | awk -v RS=: -v ORS=: '\$1 != "'\$2'"' | sed 's/:\$//'\`"; }

path_remove PATH ~/bin # when calling cmake (at the bottom of this script), do not invoke ~/bin/cmake but real cmake!


EOF
else
    # remove bottom 2 lines from cmake_call.sh
    sed -i '$ d' $(pwd)/cmake_call.sh
    sed -i '$ d' $(pwd)/cmake_call.sh
fi


echo "ARGS='${ARGS_STR}'" >> $(pwd)/cmake_call.sh
echo "echo cmake \"\$ARGS\""  >> $(pwd)/cmake_call.sh
echo "eval cmake \"\$ARGS\""  >> $(pwd)/cmake_call.sh
#echo "eval which cmake"       >> $(pwd)/cmake_call.sh

chmod +x     $(pwd)/cmake_call.sh
chown $user: $(pwd)/cmake_call.sh

cmake "$@"

用法：

mkdir build
cd    build
cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_INSTALL_PREFIX=$(pwd)/install ..

这将使用以下内容创建cmake_call.sh：

#!/usr/bin/env bash


#http://stackoverflow.com/a/34621068
path_remove ()  { export $1="`echo -n ${!1} | awk -v RS=: -v ORS=: '$1 != "'$2'"' | sed 's/:$//'`"; }

path_remove PATH ~/bin # when calling cmake (at the bottom of this script), do not invoke ~/bin/cmake but real cmake!


ARGS=' "-DCMAKE_BUILD_TYPE=Debug" "-DCMAKE_INSTALL_PREFIX=$(pwd)/install" ".."'
echo cmake "$ARGS"
eval cmake "$ARGS"

第3行最后一行存储cmake参数。您现在可以通过简单地调用：

来重新调用您使用的确切命令行

./cmake_call.sh

脚注：

由于~/bin/cmake，

（*** 1）~/.profile通常位于PATH中。在第一次创建~/bin/cmake时，可能需要注销并重新登录，以便.profile看到~/bin。

Answer 3

一种非常特定于Linux的实现相同目标的方法：

if(${CMAKE_SYSTEM_NAME} STREQUAL Linux)
    file(STRINGS /proc/self/status _cmake_process_status)

    # Grab the PID of the parent process
    string(REGEX MATCH "PPid:[ \t]*([0-9]*)" _ ${_cmake_process_status})

    # Grab the absolute path of the parent process
    file(READ_SYMLINK /proc/${CMAKE_MATCH_1}/exe _cmake_parent_process_path)

    # Compute CMake arguments only if CMake was not invoked by the native build
    # system, to avoid dropping user specified options on re-triggers.
    if(NOT ${_cmake_parent_process_path} STREQUAL ${CMAKE_MAKE_PROGRAM})
        execute_process(COMMAND bash -c "tr '\\0' ' ' < /proc/$PPID/cmdline"
                        OUTPUT_VARIABLE _cmake_args)

        string(STRIP "${_cmake_args}" _cmake_args)

        set(CMAKE_ARGS "${_cmake_args}"
            CACHE STRING "CMake command line args (set by end user)" FORCE)
    endif()
    message(STATUS "User Specified CMake Arguments: ${CMAKE_ARGS}")
endif()

如何捕获CMake命令行参数？

3 个答案: