Question

我正在尝试在服务器和客户端之间进行非阻塞I / O.在连接两个之后，我正在尝试使用fork来处理IO，但是当尝试读取“传输端点未连接”时服务器端出错并且它发生了两次（因为我正在猜测叉子？）。

服务器代码

//includes taken out

#define PORT "4950"
#define STDIN 0

struct sockaddr name;

void set_nonblock(int socket) {
    int flags;
    flags = fcntl(socket,F_GETFL,0);
    assert(flags != -1);
    fcntl(socket, F_SETFL, flags | O_NONBLOCK);
}


// get sockaddr, IPv4 or IPv6:
void *get_in_addr(struct sockaddr *sa) {
    if (sa->sa_family == AF_INET)
        return &(((struct sockaddr_in*)sa)->sin_addr);

    return &(((struct sockaddr_in6*)sa)->sin6_addr);
}


int main(int agrc, char** argv) {
    int status, sock, adrlen, new_sd;

    struct addrinfo hints;
    struct addrinfo *servinfo;  //will point to the results

    //store the connecting address and size
    struct sockaddr_storage their_addr;
    socklen_t their_addr_size;

    //socket infoS
    memset(&hints, 0, sizeof hints); //make sure the struct is empty
    hints.ai_family = AF_INET;
    hints.ai_socktype = SOCK_STREAM; //tcp
    hints.ai_flags = AI_PASSIVE;     //use local-host address

    //get server info, put into servinfo
    if ((status = getaddrinfo("127.0.0.1", PORT, &hints, &servinfo)) != 0) {
        fprintf(stderr, "getaddrinfo error: %s\n", gai_strerror(status));
        exit(1);
    }

    //make socket
    sock = socket(servinfo->ai_family, servinfo->ai_socktype, servinfo->ai_protocol);
    if (sock < 0) {
        printf("\nserver socket failure %m", errno);
        exit(1);
    }

    //allow reuse of port
    int yes=1;
    if (setsockopt(sock,SOL_SOCKET,SO_REUSEADDR,&yes,sizeof(int)) == -1) {
        perror("setsockopt");
        exit(1);
    }

    //unlink and bind
    unlink("127.0.0.1");
    if(bind (sock, servinfo->ai_addr, servinfo->ai_addrlen) < 0) {
        printf("\nBind error %m", errno);
        exit(1);
    }

    freeaddrinfo(servinfo);

    //listen
    if(listen(sock, 5) < 0) {
        printf("\nListen error %m", errno);
        exit(1);
    } 
    their_addr_size = sizeof(their_addr);
    //accept
    new_sd = accept(sock, (struct sockaddr*)&their_addr, &their_addr_size);
    if( new_sd < 0) {
        printf("\nAccept error %m", errno);
        exit(1);
    }

    cout<<"\nSuccessful Connection!";

    //set nonblock
    set_nonblock(new_sd);

    char* in = new char[255];
    char* out = new char[255];
    int numSent;
    int numRead;
    pid_t pid;

    fork();
    pid = getpid();

    if(pid == 0) {

        while( !(out[0] == 'q' && out[1] == 'u' && out[2] == 'i' && out[3] == 't') ) {

            fgets(out, 255, stdin);
            numSent = send(sock, out, strlen(out), 0);

            if(numSent < 0) {
                printf("\nError sending %m", errno);
                exit(1);
            }   //end error
        }   //end while
    }   //end child

    else {
        numRead = recv(sock, in, 255, 0);
        if(numRead < 0) {
            printf("\nError reading %m", errno);
            exit(1);
        }   //end error
        else {
            cout<<in;
            for(int i=0;i<255;i++)
                in[i] = '\0';

        }   //end else
    }   //end parent

    cout<<"\n\nExiting normally\n";
    return 0;
}

客户端代码

//包括取出

#define PORT "4950"

struct sockaddr name;

void set_nonblock(int socket) {
    int flags;
    flags = fcntl(socket,F_GETFL,0);
    assert(flags != -1);
    fcntl(socket, F_SETFL, flags | O_NONBLOCK);
}


// get sockaddr, IPv4 or IPv6:
void *get_in_addr(struct sockaddr *sa) {
    if (sa->sa_family == AF_INET)
        return &(((struct sockaddr_in*)sa)->sin_addr);

    return &(((struct sockaddr_in6*)sa)->sin6_addr);
}

int main(int agrc, char** argv) {
    int status, sock, adrlen;

    struct addrinfo hints;
    struct addrinfo *servinfo;  //will point to the results

    memset(&hints, 0, sizeof hints); //make sure the struct is empty
    hints.ai_family = AF_INET;
    hints.ai_socktype = SOCK_STREAM; //tcp
    hints.ai_flags = AI_PASSIVE;     //use local-host address

    //get server info, put into servinfo
    if ((status = getaddrinfo("127.0.0.1", PORT, &hints, &servinfo)) != 0) {
        fprintf(stderr, "getaddrinfo error: %s\n", gai_strerror(status));
        exit(1);
    }

    //make socket
    sock = socket(servinfo->ai_family, servinfo->ai_socktype, servinfo->ai_protocol);
    if (sock < 0) {
        printf("\nserver socket failure %m", errno);
        exit(1);
    }

    if(connect(sock, servinfo->ai_addr, servinfo->ai_addrlen) < 0) {
        printf("\nclient connection failure %m", errno);
        exit(1);
    }

    cout<<"\nSuccessful connection!";

    //set nonblock
    set_nonblock(sock);

    char* out = new char[255];
    char* in = new char[255];
    int numRead;
    int numSent;
    pid_t pid;

    fork();
    pid = getpid();

    if(pid == 0) {

        while( !(out[0] == 'q' && out[1] == 'u' && out[2] == 'i' && out[3] == 't') ) {

            fgets(out, 255, stdin);
            numSent = send(sock, out, strlen(out), 0);

            if(numSent < 0) {
                printf("\nError sending %m", errno);
                exit(1);
            }   //end error
        }   //end while
    }   //end child process

    else {
        while( !(in[0] == 'q' && in[1] == 'u' && in[2] == 'i' && in[3] == 't') ) {
        numRead = recv(sock, in, 255, 0);
            cout<<in;
            for(int i=0;i<255;i++)
                in[i] = '\0';
        }
    }   //end parent process

    cout<<"\n\nExiting normally\n";
    return 0;
}

我也尝试使用线程来执行I / O.问题在于，当我运行程序时，它就像线程一样不会发生。该程序只运行“成功连接”，然后“正常退出”。我在while（1）循环中添加了一些cout语句，并且它们确实打印了几次，但它们只是因为某些原因而停止了。我不确定我的线程或套接字是否有问题。代码（非常类似于上面）就在这里 -

服务器

//includes taken out

#define PORT "4950"
#define STDIN 0

pthread_t readthread;
pthread_t sendthread;

char* in = new char[255];
char* out = new char[255];
int numSent;
int numRead;

struct sockaddr name;
int sock, new_sd;

void* readThread(void* threadid) {

    while(1) {

        numRead = recv(new_sd, in, 255, 0);

        if(numRead > 0) {
            cout<<"\n"<<in;
            for(int i=0;i<strlen(in);i++)
                in[i] = '\0';
        }   //end if
        else if(numRead < 0) {
            printf("\nError reading %m", errno);
            exit(1);
        }

    }   //end while
}   //END READTHREAD


void* sendThread(void* threadid) {

     while(1) {

        cin.getline(out, 255);

        numSent = send(new_sd, out, 255, 0);

        if(numSent > 0) {
            for(int i=0;i<strlen(out);i++)
                out[i] = '\0';
        }   //end if
        else if(numSent < 0) {
            printf("\nError sending %m", errno);
            exit(1);
        }
    }   //end while
}   //END SENDTHREAD

void set_nonblock(int socket) {
    int flags;
    flags = fcntl(socket,F_GETFL,0);
    assert(flags != -1);
    fcntl(socket, F_SETFL, flags | O_NONBLOCK);
}

// get sockaddr, IPv4 or IPv6:
void *get_in_addr(struct sockaddr *sa) {
    if (sa->sa_family == AF_INET)
        return &(((struct sockaddr_in*)sa)->sin_addr);

    return &(((struct sockaddr_in6*)sa)->sin6_addr);
}

int main(int agrc, char** argv) {
    int status, adrlen;

    struct addrinfo hints;
    struct addrinfo *servinfo;  //will point to the results

    //store the connecting address and size
    struct sockaddr_storage their_addr;
    socklen_t their_addr_size;

    //socket infoS
    memset(&hints, 0, sizeof hints); //make sure the struct is empty
    hints.ai_family = AF_INET;
    hints.ai_socktype = SOCK_STREAM; //tcp
    hints.ai_flags = AI_PASSIVE;     //use local-host address

    //get server info, put into servinfo
    if ((status = getaddrinfo("127.0.0.1", PORT, &hints, &servinfo)) != 0) {
        fprintf(stderr, "getaddrinfo error: %s\n", gai_strerror(status));
        exit(1);
    }

    //make socket
    sock = socket(servinfo->ai_family, servinfo->ai_socktype, servinfo->ai_protocol);
    if (sock < 0) {
        printf("\nserver socket failure %m", errno);
        exit(1);
    }

    //allow reuse of port
    int yes=1;
    if (setsockopt(sock,SOL_SOCKET,SO_REUSEADDR,&yes,sizeof(int)) == -1) {
        perror("setsockopt");
        exit(1);
    }

    //unlink and bind
    unlink("127.0.0.1");
    if(bind (sock, servinfo->ai_addr, servinfo->ai_addrlen) < 0) {
        printf("\nBind error %m", errno);
        exit(1);
    }

    freeaddrinfo(servinfo);

    //listen
    if(listen(sock, 5) < 0) {
        printf("\nListen error %m", errno);
        exit(1);
    }

    their_addr_size = sizeof(their_addr);
    //accept
    new_sd = accept(sock, (struct sockaddr*)&their_addr, &their_addr_size);
    if( new_sd < 0) {
        printf("\nAccept error %m", errno);
        exit(1);
    }  

    cout<<"\nSuccessful Connection!";

    //set nonblock
    set_nonblock(new_sd);

    pthread_attr_t attr;
    pthread_attr_init(&attr);
    pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE);

    pthread_create(&readthread, &attr, readThread, (void*)0);
    pthread_create(&sendthread, &attr, sendThread, (void*)1);

    cout<<"\n\nExiting normally\n";
    return 0;
}

客户端

#define PORT "4950"

pthread_t readthread;
pthread_t sendthread;
char* in = new char[255];
char* out = new char[255];
int numSent;
int numRead;
struct sockaddr name;
int sock;

void* readThread(void* threadid) {

    while(1) {

        numRead = recv(sock, in, 255, 0);

        if(numRead > 0) {
            cout<<"\n"<<in;
            for(int i=0;i<strlen(in);i++)
                in[i] = '\0';
        }   //end if
        else if(numRead < 0) {
            printf("\nError reading %m", errno);
            exit(1);
        }
    }   //end while
}   //END READTHREAD

void* sendThread(void* threadid) {

    while(1) {

        cin.getline(out, 255);
        numSent = send(sock, out, 255, 0);

        if(numSent > 0) {
            for(int i=0;i<strlen(out);i++)
                out[i] = '\0';
        }   //end if
        else if(numSent < 0) {
            printf("\nError sending %m", errno);
            exit(1);
        }

    }   //end while
}   //END SENDTHREAD

void set_nonblock(int socket) {
    int flags;
    flags = fcntl(socket,F_GETFL,0);
    assert(flags != -1);
    fcntl(socket, F_SETFL, flags | O_NONBLOCK);
}


// get sockaddr, IPv4 or IPv6:
void *get_in_addr(struct sockaddr *sa) {
    if (sa->sa_family == AF_INET)
        return &(((struct sockaddr_in*)sa)->sin_addr);

    return &(((struct sockaddr_in6*)sa)->sin6_addr);
}

int main(int agrc, char** argv) {
    int status, adrlen;

    struct addrinfo hints;
    struct addrinfo *servinfo;  //will point to the results

    memset(&hints, 0, sizeof hints); //make sure the struct is empty
    hints.ai_family = AF_INET;
    hints.ai_socktype = SOCK_STREAM; //tcp
    hints.ai_flags = AI_PASSIVE;     //use local-host address

    //get server info, put into servinfo
    if ((status = getaddrinfo("127.0.0.1", PORT, &hints, &servinfo)) != 0) {
        fprintf(stderr, "getaddrinfo error: %s\n", gai_strerror(status));
        exit(1);
    }

    //make socket
    sock = socket(servinfo->ai_family, servinfo->ai_socktype, servinfo->ai_protocol);
    if (sock < 0) {
        printf("\nserver socket failure %m", errno);
        exit(1);
    }

    if(connect(sock, servinfo->ai_addr, servinfo->ai_addrlen) < 0) {
        printf("\nclient connection failure %m", errno);
        exit(1);
    }

    cout<<"\nSuccessful connection!";

    //set nonblock
    set_nonblock(sock);

    pthread_attr_t attr;
    pthread_attr_init(&attr);
    pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE);

    pthread_create(&readthread, &attr, readThread, (void*)0);
    pthread_create(&sendthread, &attr, sendThread, (void*)1);

    cout<<"\n\nExiting normally\n";
    return 0;
}

我为长篇文章道歉，但我已经在这几天了，我不知道该怎么办。我尝试使用select（），但这对于1个客户端和服务器I / O来说似乎有点多。如果有人可以指出上面可能出现的问题或任何其他提示（或者我只是选择:)：我会非常感激。

Answer 1

我认为你的问题在这里：

numSent = send(sock, out, strlen(out), 0);

在这里：

numRead = recv(sock, in, 255, 0);

您正在尝试在侦听套接字上send和recv。您需要使用new_sd这是可接受的套接字。请参阅accept(2)的手册页。

Answer 2

自从我完成任何POSIX编程以来已经有一段时间了，但下面的代码看起来有点奇怪：

fork();
pid = getpid();
if(pid == 0) {

IIRC，您应该检查fork的返回值：0表示子进程的返回值，父进程中的子进程的pid。

没看过你的其余代码：）

Answer 3

我查看了前两个代码服务器和客户端。不幸的是，你错误地设计了你的程序。服务器应该执行以下操作（在多进程的情况下）：

创建套接字
绑定到端口号
更改为被动模式（通过listen（））。
转到循环以接受传入连接。这里sock仅负责监听新连接，并且不像你那样负责发送/ recv。
- 接受新连接。接受（）
- 创建新流程
- 新流程负责发送/接收。父进程应返回步骤4以侦听新连接。

这是一个伪代码

while (1) {
    new_sd = accept(....);
    if (new_sd < 0) continue; // or quit
    if (fork() == 0) {
         // do sendin and receiving USING new_sd
         exit(0);  // child terminates here
    }
}

更新：由于您正在寻找非阻塞方案，我建议您使用select（）或poll（）系统调用。

我觉得你想要创建两个进程，一个进程用于发送，另一个进程用于接收。如果是这样，那么您不需要将new_sd设置为非阻塞模式，因为这两个进程同时运行。如果您打算这样做，那么子进程将创建另一个进程，以便第一个子进行发送，第二个进行接收。如下：

while (1) {
    new_sd = accept(....);
    if (new_sd < 0) continue; // or quit
    if (fork() == 0) {
         pid = fork();
         if (pid == 0) then do_sending(new_sd);
         else do_receiving(new_sd);
         exit(0);  // child terminates here
    }
}

简单的套接字非阻塞I / O.

3 个答案: