Question

我试图第一次使用Yocto工具为我的BeagleBoneBlack。

首先，我运行此bash文件来安装Yocto：

#!/bin/bash
WKDIR=/work
mkdir -p $WKDIR/beaglebone-black/yocto/sources
mkdir -p $WKDIR/beaglebone-black/yocto/builds
cd $WKDIR/beaglebone-black/yocto/sources
git clone -b morty git://git.yoctoproject.org/poky.git poky-morty
cd $WKDIR/beaglebone-black/yocto/
source sources/poky-morty/oe-init-build-env builds/build-bbb-morty

然后我在＆＃34; build-bbb-morty / conf＆＃34;编辑了local.conf文件。 diretory：

MACHINE ?= "beaglebone"

并添加了

DL_DIR ?= "${TOPDIR}/../dl"
IMAGE_INSTALL_append = " kernel-modules kernel-devicetree"

然后我运行bitbake：＆gt; bitbake core-image-minimal

在我的Core i7五代中大约8个小时后，我的终端输出得到了这个结果，我不知道我需要做些什么来修复它：

bitbake core-image-minimal
Parsing recipes: 100% |########################################################################################################| Time: 0:02:55
Parsing of 864 .bb files complete (0 cached, 864 parsed). 1318 targets, 67 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION        = "1.32.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-16.04"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "beaglebone"
DISTRO            = "poky"
DISTRO_VERSION    = "2.2.1"
TUNE_FEATURES     = "arm armv7a vfp  neon        callconvention-hard        cortexa8"
TARGET_FPU        = "hard"
meta              
meta-poky        
meta-yocto-bsp    = "morty:a3fa5ce87619e81d7acfa43340dd18d8f2b2d7dc"

NOTE: Fetching uninative binary shim from http ://downloads.yoctoproject.org/releases/uninative/1.4/x86_64-nativesdk-libc.tar.bz2;sha256sum=101ff8f2580c193488db9e76f9646fb6ed38b65fb76f403acb0e2178ce7127ca
--2017-01-18 15:51:09--  http ://downloads.yoctoproject.org/releases/uninative/1.4/x86_64-nativesdk-libc.tar.bz2
Resolving downloads.yoctoproject.org (downloads.yoctoproject.org)... 198.145.20.127
Connecting to downloads.yoctoproject.org (downloads.yoctoproject.org)|198.145.20.127|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2473216 (2.4M) [application/octet-stream]
Saving to: ‘/work/beaglebone-black/yocto/builds/build-bbb-morty/../dl/uninative/101ff8f2580c193488db9e76f9646fb6ed38b65fb76f403acb0e2178ce7127ca/x86_64-nativesdk-libc.tar.bz2’


2017-01-18 15:51:18 (297 KB/s) - ‘/work/beaglebone-black/yocto/builds/build-bbb-morty/../dl/uninative/101ff8f2580c193488db9e76f9646fb6ed38b65fb76f403acb0e2178ce7127ca/x86_64-nativesdk-libc.tar.bz2’ saved [2473216/2473216]

Initialising tasks: 100% |#####################################################################################################| Time: 0:00:14
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: attr-native-2.4.47-r0 do_fetch: Failed to fetch URL http ://download.savannah.gnu.org/releases/attr/attr-2.4.47.src.tar.gz, attempting MIRRORS if available
WARNING: libpng-native-1.6.24-r0 do_fetch: Failed to fetch URL http ://distfiles.gentoo.org/distfiles/libpng-1.6.24.tar.xz, attempting MIRRORS if available
ERROR: core-image-minimal-1.0-r0 do_image_wic: Function failed: do_image_wic (log file is located at /work/beaglebone-black/yocto/builds/build-bbb-morty/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_image_wic.23788)
ERROR: Logfile of failure stored in: /work/beaglebone-black/yocto/builds/build-bbb-morty/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_image_wic.23788
Log data follows:
| DEBUG: Executing python function set_image_size
| DEBUG: Python function set_image_size finished
| DEBUG: Executing shell function do_image_wic
| Checking basic build environment...
| Done.
| 
| Build artifacts not found, exiting.<br/>
|   (Please check that the build artifacts for the machine
|    selected in local.conf actually exist and that they
|    are the correct artifacts for the image (.wks file))
| 
| The artifact that couldn't be found was kernel-dir:
|   /work/beaglebone-black/yocto/builds/build-bbb-morty/tmp/deploy/images/beaglebone
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_image_wic (log file is located at /work/beaglebone-black/yocto/builds/build-bbb-morty/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_image_wic.23788)
ERROR: Task (/work/beaglebone-black/yocto/sources/poky-morty/meta/recipes-core/images/core-image-minimal.bb:do_image_wic) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1771 tasks of which 6 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /work/beaglebone-black/yocto/sources/poky-morty/meta/recipes-core/images/core-image-minimal.bb:do_image_wic
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Answer 1

虽然不确定这可能是问题的原因，但是在local.conf上下文中首先使用CORE_IMAGE_EXTRA_INSTALL变量向图像添加包的方法。

因此改变：

IMAGE_INSTALL_append =＆＃34; kernel-modules kernel-devicetree＆＃34;

到

CORE_IMAGE_EXTRA_INSTALL + =＆＃34; kernel-modules kernel-devicetree＆＃34;

Answer 2

我认为您的工作方法没有问题。它似乎是一个构建环境问题，但错误日志似乎可以确认。您的日志位置位于“ /work/beaglebone-black/yocto/builds/build-bbb-morty/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_image_wic”。 23788“

Answer 3

您的错误日志指示获取二进制文件的URL失败。

您可以尝试通过代理使用隧道。或者您可以再次运行bitbake，因为有时由于网络条件有时也会失败。

YOCTO - 首次为BBB打造

3 个答案: