Question

我无法连接到Linux上的WEP wifi（Mint）：我没有DHCP提供。

我的bash脚本（我以root身份启动）执行以下操作：

pkill dhclient
pkill wpa_supplicant #just in case
ip link set dev wlan0 down
ip addr flush dev wlan0
iwconfig wlan0 essid "MyWifi"
iwconfig wlan0 enc off
ip link set dev wlan0 up
dhclient -v wlan0

当我启动它时，我没有获得DHCP提供：

Internet Systems Consortium DHCP Client 4.2.4
Copyright 2004-2012 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/wlan0/e8:4e:06:24:b2:9e
Sending on   LPF/wlan0/e8:4e:06:24:b2:9e
Sending on   Socket/fallback
DHCPREQUEST of 192.168.100.101 on wlan0 to 255.255.255.255 port 67 (xid=0x19efd6f2)
DHCPREQUEST of 192.168.100.101 on wlan0 to 255.255.255.255 port 67 (xid=0x19efd6f2)
DHCPREQUEST of 192.168.100.101 on wlan0 to 255.255.255.255 port 67 (xid=0x19efd6f2)
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3 (xid=0x17d23b2f)
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3 (xid=0x17d23b2f)
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5 (xid=0x17d23b2f)
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 11 (xid=0x17d23b2f)
...

重要：

我没有NetworkManager（没有运行和删除 - I saw that was a common issue），我更喜欢使用命令行。

当我扫描我的wifi时，我觉得没问题：

sudo iwlist wlan0 scan
  wlan0     Scan completed :
   Cell 01 - Address: 20:C9
   [..]
   Cell 02 - Address: 02:26:C6:2F:46:7E
            Channel:9
            Frequency:2.452 GHz (Channel 9)
            Quality=54/70  Signal level=-56 dBm  
            Encryption key:off
            ESSID:"MyWifi"
            Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 48 Mb/s
                      54 Mb/s; 6 Mb/s; 9 Mb/s
            Bit Rates:12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
            Mode:Ad-Hoc
            Extra:tsf=0000000001ed4e21
            Extra: Last beacon: 32ms ago
            IE: Unknown: 000B6950686F6E65204D795769
            IE: Unknown: 010882848B96606C0C12
            IE: Unknown: 030109
            IE: Unknown: 06020000
            IE: Unknown: 2A0100
            IE: Unknown: 320418243048

我知道wifi工作正常，因为我有其他设备连接到它
我知道我的wifi加密狗工作正常，因为我设法连接到其他wifi（WPA）。

Answer 1

好的，我找到了解决方案。我默认使用“托管”模式。但在iwlist扫描中，它表示'ad-hoc'：

 Mode:Ad-Hoc

因此，连接到我的Wifi的正确脚本是：

 #!/bin/bash
 pkill dhclient
 pkill wpa_supplicant #just in case
 ip link set dev wlan0 down
 ip addr flush dev wlan0
 iwconfig wlan0 essid "MyWifi"
 iwconfig wlan0 enc off
 iwconfig wlan0 key off
 iwconfig wlan0 mode Ad-Hoc
 ip link set dev wlan0 up
 dhclient -v wlan0

并且有效：）

连接到WEP wifi时没有DHCP响应

1 个答案: