Question

我正在制作一份自定义报告，实际上并不复杂。仅使用一个表/基本上，如果客户组与参数“Builder”相同，则报表需要打印文本列表。我需要写一个公式来说

IF {?Builder}=”123456”
THEN
“QTXE FANS 6”  DUCT FOR ALL BATHROOMS WITH TUB OR SHOWER 
QTRE FANS 4” DUCT ½ BATH OR ONLY ROOM AND THE LAUNDRY AS LONG AS IT IS NOT THE WHOLE     HOUSE FAN 
PULL WIRE FROM WHOLE HOUSE FAN SWITCH TO FURNACE 
TERMINALS 4 & 6 on relay
IF BIG CUSTOM VERIFY IF HOOD FAN NEEDS PULLED TO FURNACE 
LOW VOLT PANEL WITH # 10 GROUND PULLED TO PANEL AND 110 OUTLET 
ON LOW VOLT TRIM PUT TV CONNECTORS ON THE ENDS AND LEAVE IN PANEL
SPLICE PHONE/CAT 5 TOGETHER MAKE SURE THE HOME RUN IS MARKED
IF WE DO CAT5 JACKS USE B PATTERN
ALL FLOURESCENT LAMPS IN RECESS AND FIXTURES 100% FLO’S 
USE ARLINGTON WEATHER PROOF BOXES 
WE DO NOT SUPPLY AIR SWITCHES FOR NTH 
2 WORK PLUGS AFTER ROUGH 
ON HOUSES WITH SPLIT DUCT SYSTEM PUT IN 50 AMP TEMP PLUG AND 30 AMP FOR TEMP HEAT 
RADON PLUG IN ATTIC OR CRAWL“
ELSE IF {?Builder}=’789123’
THEN
…

你得到了照片。

附件是如何在公式中读取代码的屏幕截图。有没有办法超越这个文本作为纯文本，所以它不被读作代码？ enter image description here

Answer 1

您需要执行所谓的转义文本。当你逃避某些事情时，你会在命令前放置一个或多个字符，以便告诉解释代码的任何内容，它需要处理转义字符之后的任何内容，而不是通常的情况。但也许试试这个，大文本块现在用单引号封装：

IF {?Builder}=”123456”
THEN
'QTXE FANS 6”  DUCT FOR ALL BATHROOMS WITH TUB OR SHOWER ' + ChrW(13) +
'QTRE FANS 4” DUCT ½ BATH OR ONLY ROOM AND THE LAUNDRY AS LONG AS IT IS NOT THE WHOLE HOUSE FAN ' + ChrW(13) +
"PULL WIRE FROM WHOLE HOUSE FAN SWITCH TO FURNACE "+ ChrW(13) +
"TERMINALS 4 & 6 on relay " + ChrW(13) +
"IF BIG CUSTOM VERIFY IF HOOD FAN NEEDS PULLED TO FURNACE "+ ChrW(13) +
"LOW VOLT PANEL WITH # 10 GROUND PULLED TO PANEL AND 110 OUTLET "+ ChrW(13) +
"ON LOW VOLT TRIM PUT TV CONNECTORS ON THE ENDS AND LEAVE IN PANEL "+ ChrW(13) +
"SPLICE PHONE/CAT 5 TOGETHER MAKE SURE THE HOME RUN IS MARKED "+ ChrW(13) +
"IF WE DO CAT5 JACKS USE B PATTERN "+ ChrW(13) +
"ALL FLOURESCENT LAMPS IN RECESS AND FIXTURES 100% FLO’S "+ ChrW(13) +
"USE ARLINGTON WEATHER PROOF BOXES "+ ChrW(13) +
"WE DO NOT SUPPLY AIR SWITCHES FOR NTH "+ ChrW(13) +
"2 WORK PLUGS AFTER ROUGH "+ ChrW(13) +
"ON HOUSES WITH SPLIT DUCT SYSTEM PUT IN 50 AMP TEMP PLUG AND 30 AMP FOR TEMP HEAT "+ ChrW(13) +
"RADON PLUG IN ATTIC OR CRAWL" ChrW(13) +
ELSE IF {?Builder}=’789123’
THEN
…

Answer 2

你必须使用保留关键字作为文本，就像这样。

 Stringvar Array keys := ["\n"];
 Stringvar Array values := [Chr(10)+Chr(13)];
 text := Replace(text, keys[i], values[i])

How to insert a line break in a StringVar in Crystal Reports

Double and single quote in string text in crystal report

Answer 3

您所遵循的流程是错误的。

如果您想将所有内容都作为段落。

IF {?Builder}=”123456”
THEN
“QTXE FANS 6”  DUCT FOR ALL BATHROOMS WITH TUB OR SHOWER "+
"QTRE FANS 4” DUCT ½ BATH OR ONLY ROOM AND THE LAUNDRY AS LONG AS IT IS NOT THE WHOLE HOUSE FAN "+
"PULL WIRE FROM WHOLE HOUSE FAN SWITCH TO FURNACE "+
"TERMINALS 4 & 6 on relay "+
"IF BIG CUSTOM VERIFY IF HOOD FAN NEEDS PULLED TO FURNACE "+
"LOW VOLT PANEL WITH # 10 GROUND PULLED TO PANEL AND 110 OUTLET "+
"ON LOW VOLT TRIM PUT TV CONNECTORS ON THE ENDS AND LEAVE IN PANEL "+
"SPLICE PHONE/CAT 5 TOGETHER MAKE SURE THE HOME RUN IS MARKED "+
"IF WE DO CAT5 JACKS USE B PATTERN "+
"ALL FLOURESCENT LAMPS IN RECESS AND FIXTURES 100% FLO’S "+
"USE ARLINGTON WEATHER PROOF BOXES "+
"WE DO NOT SUPPLY AIR SWITCHES FOR NTH "+
"2 WORK PLUGS AFTER ROUGH "+
"ON HOUSES WITH SPLIT DUCT SYSTEM PUT IN 50 AMP TEMP PLUG AND 30 AMP FOR TEMP HEAT "+
"RADON PLUG IN ATTIC OR CRAWL"
ELSE IF {?Builder}=’789123’
THEN
…

如果您想要分开的行，请按照以下流程进行操作：

IF {?Builder}=”123456”
THEN
“QTXE FANS 6”  DUCT FOR ALL BATHROOMS WITH TUB OR SHOWER "+ ChrW(13) +
"QTRE FANS 4” DUCT ½ BATH OR ONLY ROOM AND THE LAUNDRY AS LONG AS IT IS NOT THE WHOLE HOUSE FAN "+ ChrW(13) +
"PULL WIRE FROM WHOLE HOUSE FAN SWITCH TO FURNACE "+ ChrW(13) +
"TERMINALS 4 & 6 on relay "+ ChrW(13) +
"IF BIG CUSTOM VERIFY IF HOOD FAN NEEDS PULLED TO FURNACE "+ ChrW(13) +
"LOW VOLT PANEL WITH # 10 GROUND PULLED TO PANEL AND 110 OUTLET "+ ChrW(13) +
"ON LOW VOLT TRIM PUT TV CONNECTORS ON THE ENDS AND LEAVE IN PANEL "+ ChrW(13) +
"SPLICE PHONE/CAT 5 TOGETHER MAKE SURE THE HOME RUN IS MARKED "+ ChrW(13) +
"IF WE DO CAT5 JACKS USE B PATTERN "+ ChrW(13) +
"ALL FLOURESCENT LAMPS IN RECESS AND FIXTURES 100% FLO’S "+ ChrW(13) +
"USE ARLINGTON WEATHER PROOF BOXES "+ ChrW(13) +
"WE DO NOT SUPPLY AIR SWITCHES FOR NTH "+ ChrW(13) +
"2 WORK PLUGS AFTER ROUGH "+ ChrW(13) +
"ON HOUSES WITH SPLIT DUCT SYSTEM PUT IN 50 AMP TEMP PLUG AND 30 AMP FOR TEMP HEAT "+ ChrW(13) +
"RADON PLUG IN ATTIC OR CRAWL" ChrW(13) +
ELSE IF {?Builder}=’789123’
THEN
…

Answer 4

您最好将每段文字嵌入到自己的text object中，然后根据参数的值显示/取消文字。

例如，包含示例文本的text object的条件抑制逻辑将是：

{?Builder}<>"123456"

您也可以将每个text object放在一个单独的部分中，然后使用相同的逻辑显示/取消该部分。

我们需要打印的文字包括像“AND”“OR”“IF”这样的单词，即水晶作为代码

4 个答案: