我试图通过ssh在路由器上执行命令。登录后，当我在设备上执行命令时，它会要求输入其他密码。我无法使用libssh2_channel_write()发送密码。以下是代码段（修改了库附带的ssh2_exec.c）。这是一个片段，其中设备已通过身份验证并已发出命令。此循环只是尝试读取已执行命令的输出：
for( ;; )
{
/* loop until we block */
int rc;
do
{
char buffer[0x4000];
rc = libssh2_channel_read( channel, buffer, sizeof(buffer) );
if( rc > 0 )
{
int i;
char *enable = "stic-isr2951-t1";
int ret;
bytecount += rc;
fprintf(stderr, "We read [%d] bytes:\n", bytecount);
for( i=0; i < rc; ++i )
fputc( buffer[i], stderr);
**if ( strstr(buffer, "assword:") != NULL ){
fprintf(stderr, "Sending the additional password now\n");
ret = libssh2_channel_write(channel, enable, strlen(enable));
fprintf(stderr, "Wrote [%d] bytes\n", ret);
}**
}
else {
if( rc != LIBSSH2_ERROR_EAGAIN )
/* no need to output this for the EAGAIN case */
fprintf(stderr, "libssh2_channel_read returned %d\n", rc);
}
}
while( rc > 0 );
/* this is due to blocking that would occur otherwise so we loop on
this condition */
if( rc == LIBSSH2_ERROR_EAGAIN )
{
waitsocket(sock, session);
}
else
break;
}
在上面的代码段中，检测到设备发布密码提示的代码是：
if ( strstr(buffer, "assword:") != NULL ){
fprintf(stderr, "Sending the additional password now\n");
ret = libssh2_channel_write(channel, enable, strlen(enable));
fprintf(stderr, "Wrote [%d] bytes\n", ret);
}
这就是我遇到问题的地方。在通道上发送的密码不起作用，因为设备继续超时，需要密码。没有迹象表明libssh2_channel_write()失败，因为返回值表明它正确地写了密码。
我错过了什么吗？
编辑：
提示连续超时密码的问题是因为密码最后没有\n。我期待lib能够处理它，但事实并非如此。
现在我能够将密码发送到远程设备，我遇到了另一个问题。在我通过libssh2_channel_write()发送密码后，后续的libssh2_channel_read()将失败并显示
LIBSSH2_ERROR_SOCKET_RECV
我不确定为什么会这样。逻辑是通过执行后续libssh2_channel_write()来检查read()是否成功（这将在远程设备上提供命令提示符），然后发出要在远程设备上执行的命令，然后是后续的读取以获取命令输出。难道我做错了什么？这似乎不起作用。这是完整的代码段：
/*
* Sample showing how to use libssh2 to execute a command remotely.
*
* The sample code has fixed values for host name, user name, password
* and command to run.
*
* Run it like this:
*
* $ ./ssh2_exec 127.0.0.1 user password "uptime"
*
*/
#include "libssh2_config.h"
#include <libssh2.h>
#include <string.h>
#ifdef HAVE_WINSOCK2_H
#include <winsock2.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif
#include <sys/time.h>
#include <sys/types.h>
#include <stdlib.h>
#include <fcntl.h>
#include <errno.h>
#include <stdio.h>
#include <ctype.h>
static int waitsocket(int socket_fd, LIBSSH2_SESSION *session)
{
struct timeval timeout;
int rc;
fd_set fd;
fd_set *writefd = NULL;
fd_set *readfd = NULL;
int dir;
timeout.tv_sec = 10;
timeout.tv_usec = 0;
FD_ZERO(&fd);
FD_SET(socket_fd, &fd);
/* now make sure we wait in the correct direction */
dir = libssh2_session_block_directions(session);
if(dir & LIBSSH2_SESSION_BLOCK_INBOUND)
readfd = &fd;
if(dir & LIBSSH2_SESSION_BLOCK_OUTBOUND)
writefd = &fd;
rc = select(socket_fd + 1, readfd, writefd, NULL, &timeout);
return rc;
}
int main(int argc, char *argv[])
{
const char *hostname = "10.10.10.10";
const char *commandline = "show version";
const char *username = "user1";
const char *password = "password1";
unsigned long hostaddr;
int flag = 0;
int sock;
struct sockaddr_in sin;
const char *fingerprint;
LIBSSH2_SESSION *session;
LIBSSH2_CHANNEL *channel;
int rc;
int exitcode;
char *exitsignal=(char *)"none";
int bytecount = 0;
size_t len;
LIBSSH2_KNOWNHOSTS *nh;
int type;
if (argc > 1)
/* must be ip address only */
hostname = argv[1];
if (argc > 2) {
username = argv[2];
}
if (argc > 3) {
password = argv[3];
}
if (argc > 4) {
commandline = argv[4];
}
rc = libssh2_init (0);
if (rc != 0) {
fprintf (stderr, "libssh2 initialization failed (%d)\n", rc);
return 1;
}
hostaddr = inet_addr(hostname);
printf("host address is: %ld\n", hostaddr);
/* Ultra basic "connect to port 22 on localhost"
* Your code is responsible for creating the socket establishing the
* connection
*/
sock = socket(AF_INET, SOCK_STREAM, 0);
sin.sin_family = AF_INET;
sin.sin_port = htons(22);
sin.sin_addr.s_addr = hostaddr;
if (connect(sock, (struct sockaddr*)(&sin),
sizeof(struct sockaddr_in)) != 0) {
fprintf(stderr, "failed to connect!\n");
return -1;
}
/* Create a session instance */
session = libssh2_session_init();
if (!session)
return -1;
//libssh2_trace(session, LIBSSH2_TRACE_AUTH|LIBSSH2_TRACE_SOCKET);
/* tell libssh2 we want it all done non-blocking */
libssh2_session_set_blocking(session, 0);
/* ... start it up. This will trade welcome banners, exchange keys,
* and setup crypto, compression, and MAC layers
*/
while ((rc = libssh2_session_handshake(session, sock)) ==
LIBSSH2_ERROR_EAGAIN);
if (rc) {
fprintf(stderr, "Failure establishing SSH session: %d\n", rc);
return -1;
}
nh = libssh2_knownhost_init(session);
if(!nh) {
/* eeek, do cleanup here */
return 2;
}
/* read all hosts from here */
libssh2_knownhost_readfile(nh, "known_hosts",
LIBSSH2_KNOWNHOST_FILE_OPENSSH);
/* store all known hosts to here */
libssh2_knownhost_writefile(nh, "dumpfile",
LIBSSH2_KNOWNHOST_FILE_OPENSSH);
fingerprint = libssh2_session_hostkey(session, &len, &type);
if(fingerprint) {
struct libssh2_knownhost *host;
#if LIBSSH2_VERSION_NUM >= 0x010206
/* introduced in 1.2.6 */
int check = libssh2_knownhost_checkp(nh, hostname, 22,
fingerprint, len,
LIBSSH2_KNOWNHOST_TYPE_PLAIN|
LIBSSH2_KNOWNHOST_KEYENC_RAW,
&host);
#else
/* 1.2.5 or older */
int check = libssh2_knownhost_check(nh, hostname,
fingerprint, len,
LIBSSH2_KNOWNHOST_TYPE_PLAIN|
LIBSSH2_KNOWNHOST_KEYENC_RAW,
&host);
#endif
fprintf(stderr, "Host check: %d, key: %s\n", check,
(check <= LIBSSH2_KNOWNHOST_CHECK_MISMATCH)?
host->key:"<none>");
/*****
* At this point, we could verify that 'check' tells us the key is
* fine or bail out.
*****/
}
else {
/* eeek, do cleanup here */
return 3;
}
libssh2_knownhost_free(nh);
if ( strlen(password) != 0 ) {
/* We could authenticate via password */
while ((rc = libssh2_userauth_password(session, username, password)) ==
LIBSSH2_ERROR_EAGAIN);
if (rc) {
fprintf(stderr, "Authentication by password failed.\n");
goto shutdown;
}
}
else {
/* Or by public key */
while ((rc = libssh2_userauth_publickey_fromfile(session, username,
"/home/user/"
".ssh/id_rsa.pub",
"/home/user/"
".ssh/id_rsa",
password)) ==
LIBSSH2_ERROR_EAGAIN);
if (rc) {
fprintf(stderr, "\tAuthentication by public key failed\n");
goto shutdown;
}
}
#if 1
//libssh2_trace(session, ~0 );
#endif
/* Exec non-blocking on the remove host */
while( (channel = libssh2_channel_open_session(session)) == NULL &&
libssh2_session_last_error(session,NULL,NULL,0) ==
LIBSSH2_ERROR_EAGAIN )
{
waitsocket(sock, session);
}
if( channel == NULL )
{
fprintf(stderr,"Error\n");
exit( 1 );
}
while( (rc = libssh2_channel_exec(channel, commandline)) ==
LIBSSH2_ERROR_EAGAIN )
{
waitsocket(sock, session);
}
if( rc != 0 )
{
fprintf(stderr,"Error\n");
exit( 1 );
}
for( ;; )
{
/* loop until we block */
int rc;
do
{
char buffer[0x4000];
rc = libssh2_channel_read( channel, buffer, sizeof(buffer) );
if( rc > 0 )
{
int i;
char *enable = "check-password\n";
int ret;
bytecount += rc;
fprintf(stderr, "We read [%d] bytes:\n", bytecount);
fputc('[', stderr);
for( i=0; i < rc; ++i )
fputc( buffer[i], stderr);
fputc(']', stderr);
if ( strstr(buffer, "Password:") != NULL ){
fprintf(stderr, "Sending the password now\n");
while((ret = libssh2_channel_write(channel, enable, strlen(enable))) == LIBSSH2_ERROR_EAGAIN) {
printf("ERROR_EAGAIN - sending password again\n");
}
fprintf(stderr, "Wrote [%d] bytes: \n", ret);
flag = 1;
continue;
}
if (!flag){ // start
char *cmd = "show clock\n";
int ret;
fprintf(stderr, "THIS is Fetching show clock command now\n");
while((ret = libssh2_channel_write(channel, cmd, strlen(cmd))) == LIBSSH2_ERROR_EAGAIN) {
printf("ERROR_EAGAIN - sending show clock again\n");
}
flag = 1;
} // end
}
else {
if(rc != LIBSSH2_ERROR_EAGAIN)
fprintf(stderr, "libssh2_channel_read returned [%d]:\n ", rc);
}
}
while( rc > 0 );
/* this is due to blocking that would occur otherwise so we loop on
this condition */
if( rc == LIBSSH2_ERROR_EAGAIN )
{
int check;
check = waitsocket(sock, session);
}
else
break;
}
exitcode = 127;
while( (rc = libssh2_channel_close(channel)) == LIBSSH2_ERROR_EAGAIN )
waitsocket(sock, session);
if( rc == 0 )
{
exitcode = libssh2_channel_get_exit_status( channel );
libssh2_channel_get_exit_signal(channel, &exitsignal,
NULL, NULL, NULL, NULL, NULL);
}
if (exitsignal)
fprintf(stderr, "\nGot signal: %s\n", exitsignal);
else
fprintf(stderr, "\nEXIT: %d bytecount: %d\n", exitcode, bytecount);
libssh2_channel_free(channel);
channel = NULL;
shutdown:
libssh2_session_disconnect(session,
"Normal Shutdown, Thank you for playing");
libssh2_session_free(session);
#ifdef WIN32
closesocket(sock);
#else
close(sock);
#endif
fprintf(stderr, "all done\n");
libssh2_exit();
return 0;
}
有什么想法吗？