Question

什么可能导致套接字Resource temporarily unavailable命令出现send()错误？套接字设置为AF_UNIX, SOCK_STREAM。它大部分时间都有效，但偶尔会出现此错误。套接字的接收端似乎正常工作。

我知道这不是很详细，但我只是在寻找一般的想法。谢谢！

Answer 1

"Resource temporarily unavailable"是与EAGAIN对应的错误消息，这意味着操作将被阻止但是请求了非阻塞操作。对于send()，这可能是由以下任何原因引起的：

使用fcntl()将文件描述符明确标记为非阻塞;或
将MSG_DONTWAIT标记传递给send();或
使用SO_SNDTIMEO套接字选项设置发送超时。

Answer 2

那是因为您正在使用non-blocking套接字并且输出缓冲区已满。

来自send()手册页

   When the message does not fit into  the  send  buffer  of  the  socket,
   send() normally blocks, unless the socket has been placed in non-block-
   ing I/O mode.  In non-blocking mode it  would  return  EAGAIN  in  this
   case.

EAGAIN 是绑定到“资源暂时无法使用”的错误代码

考虑使用select()来更好地控制此行为

Answer 3

让我举个例子：

客户端连接到服务器，并每1秒向服务器发送1MB数据。
服务器端接受连接，然后睡眠20秒，而没有从客户端接收消息。因此，客户端中的tcp send buffer已满。

客户端代码：

#include <arpa/inet.h>
#include <sys/socket.h>
#include <stdio.h>
#include <errno.h>
#include <fcntl.h>
#include <stdlib.h>
#include <string.h>
#define exit_if(r, ...)                                                                          \
    if (r) {                                                                                     \
        printf(__VA_ARGS__);                                                                     \
        printf("%s:%d error no: %d error msg %s\n", __FILE__, __LINE__, errno, strerror(errno)); \
        exit(1);                                                                                 \
    }

void setNonBlock(int fd) {
    int flags = fcntl(fd, F_GETFL, 0);
    exit_if(flags < 0, "fcntl failed");
    int r = fcntl(fd, F_SETFL, flags | O_NONBLOCK);
    exit_if(r < 0, "fcntl failed");
}

void test_full_sock_buf_1(){
    short port = 8000;
    struct sockaddr_in addr;
    memset(&addr, 0, sizeof addr);
    addr.sin_family = AF_INET;
    addr.sin_port = htons(port);
    addr.sin_addr.s_addr = INADDR_ANY;


    int fd = socket(AF_INET, SOCK_STREAM, 0);
    exit_if(fd<0, "create socket error");

    int ret = connect(fd, (struct sockaddr *) &addr, sizeof(struct sockaddr));
    exit_if(ret<0, "connect to server error");
    setNonBlock(fd);

    printf("connect to server success");

    const int LEN = 1024 * 1000;
    char msg[LEN];  // 1MB data
    memset(msg, 'a', LEN);

    for (int i = 0; i < 1000; ++i) {
        int len = send(fd, msg, LEN, 0);
        printf("send: %d, erron: %d, %s \n", len, errno, strerror(errno));
        sleep(1);
    }

}

int main(){
    test_full_sock_buf_1();

    return 0;
}

服务器端代码：

    #include <arpa/inet.h>
    #include <sys/socket.h>
    #include <stdio.h>
    #include <errno.h>
    #include <fcntl.h>
    #include <stdlib.h>
    #include <string.h>
    #define exit_if(r, ...)                                                                          \
        if (r) {                                                                                     \
            printf(__VA_ARGS__);                                                                     \
            printf("%s:%d error no: %d error msg %s\n", __FILE__, __LINE__, errno, strerror(errno)); \
            exit(1);                                                                                 \
        }
void test_full_sock_buf_1(){

    int listenfd = socket(AF_INET, SOCK_STREAM, 0);
    exit_if(listenfd<0, "create socket error");

    short port = 8000;
    struct sockaddr_in addr;
    memset(&addr, 0, sizeof addr);
    addr.sin_family = AF_INET;
    addr.sin_port = htons(port);
    addr.sin_addr.s_addr = INADDR_ANY;

    int r = ::bind(listenfd, (struct sockaddr *) &addr, sizeof(struct sockaddr));
    exit_if(r<0, "bind socket error");

    r = listen(listenfd, 100);
    exit_if(r<0, "listen socket error");

    struct sockaddr_in raddr;
    socklen_t rsz = sizeof(raddr);
    int cfd = accept(listenfd, (struct sockaddr *) &raddr, &rsz);
    exit_if(cfd<0, "accept socket error");

    sockaddr_in peer;
    socklen_t alen = sizeof(peer);
    getpeername(cfd, (sockaddr *) &peer, &alen);

    printf("accept a connection from %s:%d\n", inet_ntoa(peer.sin_addr), ntohs(peer.sin_port));

    printf("but now I will sleep 15 second, then exit");
    sleep(15);
}

启动服务器端，然后启动客户端。

服务器端可能会输出：

accept a connection from 127.0.0.1:35764
but now I will sleep 15 second, then exit
Process finished with exit code 0

客户端可能会输出：

connect to server successsend: 1024000, erron: 0, Success 
send: 1024000, erron: 0, Success 
send: 1024000, erron: 0, Success 
send: 552190, erron: 0, Success 
send: -1, erron: 11, Resource temporarily unavailable 
send: -1, erron: 11, Resource temporarily unavailable 
send: -1, erron: 11, Resource temporarily unavailable 
send: -1, erron: 11, Resource temporarily unavailable 
send: -1, erron: 11, Resource temporarily unavailable 
send: -1, erron: 11, Resource temporarily unavailable 
send: -1, erron: 11, Resource temporarily unavailable 
send: -1, erron: 11, Resource temporarily unavailable 
send: -1, erron: 11, Resource temporarily unavailable 
send: -1, erron: 11, Resource temporarily unavailable 
send: -1, erron: 11, Resource temporarily unavailable 
send: -1, erron: 104, Connection reset by peer 
send: -1, erron: 32, Broken pipe 
send: -1, erron: 32, Broken pipe 
send: -1, erron: 32, Broken pipe 
send: -1, erron: 32, Broken pipe 
send: -1, erron: 32, Broken pipe

您可以看到，由于服务器端未从客户端接收数据，因此当客户端tcp buffer满时，您仍然发送数据，因此可能会收到Resource temporarily unavailable错误。

什么可以导致sock send（）命令中的“资源暂时不可用”

3 个答案: