Question

我让Elmah正确使用MVC 3并开始为同一个项目设置ElmahR。指定的配置对我不起作用。我的配置如下。

除了添加目标网址和源网址外，我没有更改默认设置。所以不知道如何解决这个问题。 wiki（项目的https://bitbucket.org/wasp/elmahr/wiki/Elmahr.config)表示仪表板应该是一个单独的应用程序，对我来说也不起作用。我猜我错过了一些实质性的东西，因为导航到posterrors.ashx似乎不是正确的事情在mvc做。

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <configSections>
    <sectionGroup name="elmah">
      <section name="security" requirePermission="false" type="Elmah.SecuritySectionHandler, Elmah" />
      <section name="errorLog" requirePermission="false" type="Elmah.ErrorLogSectionHandler, Elmah" />
      <section name="errorMail" requirePermission="false" type="Elmah.ErrorMailSectionHandler, Elmah" />
      <section name="errorFilter" requirePermission="false" type="Elmah.ErrorFilterSectionHandler, Elmah" />
      <section name="errorPost" requirePermission="false" type="Elmah.ErrorLogSectionHandler, Elmah" />
    </sectionGroup>
    <section name="elmahr" type="ElmahR.Core.Config.SectionHandler, ElmahR" />
  </configSections>
  <elmahr>
    <!-- Monitored applications list -->
    <application name="Source Application" sourceId="http://localhost:3154/elmah"/>
  </elmahr>
  <connectionStrings>
    <add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" />
  </connectionStrings>
  <appSettings>
    <add key="webpages:Version" value="1.0.0.0" />
    <add key="ClientValidationEnabled" value="true" />
    <add key="UnobtrusiveJavaScriptEnabled" value="true" />
    <add key="elmah.mvc.disableHandler" value="false" />
    <add key="elmah.mvc.requiresAuthentication" value="false" />
    <add key="elmah.mvc.allowedRoles" value="*" />
    <add key="elmah.mvc.route" value="elmah" />
  </appSettings>
  <system.web>
    <compilation debug="true" targetFramework="4.0">
      <assemblies>
        <add assembly="System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
        <add assembly="System.Web.Helpers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
        <add assembly="System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
        <add assembly="System.Web.Mvc, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
        <add assembly="System.Web.WebPages, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
      </assemblies>
    </compilation>
    <authentication mode="Forms">
      <forms loginUrl="~/Account/LogOn" timeout="2880" />
    </authentication>
    <membership>
      <providers>
        <clear />
        <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" applicationName="/" />
      </providers>
    </membership>
    <profile>
      <providers>
        <clear />
        <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/" />
      </providers>
    </profile>
    <roleManager enabled="false">
      <providers>
        <clear />
        <add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/" />
        <add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/" />
      </providers>
    </roleManager>
    <pages>
      <namespaces>
        <add namespace="System.Web.Helpers" />
        <add namespace="System.Web.Mvc" />
        <add namespace="System.Web.Mvc.Ajax" />
        <add namespace="System.Web.Mvc.Html" />
        <add namespace="System.Web.Routing" />
        <add namespace="System.Web.WebPages" />
      </namespaces>
    </pages>
    <httpModules>
      <add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah" />
      <add name="ErrorMail" type="Elmah.ErrorMailModule, Elmah" />
      <add name="ErrorFilter" type="Elmah.ErrorFilterModule, Elmah" />
      <add name="ErrorPost" type="ElmahR.Elmah.ErrorPostModule, ElmahR.Elmah" />
    </httpModules>
  </system.web>
  <system.webServer>
    <modules runAllManagedModulesForAllRequests="true">
      <add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah" preCondition="managedHandler" />
      <add name="ErrorMail" type="Elmah.ErrorMailModule, Elmah" preCondition="managedHandler" />
      <add name="ErrorFilter" type="Elmah.ErrorFilterModule, Elmah" preCondition="managedHandler" />
      <add name="ErrorPost" type="ElmahR.Elmah.ErrorPostModule, ElmahR.Elmah" />
    </modules>
    <validation validateIntegratedModeConfiguration="false" />
  </system.webServer>
  <runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" />
        <bindingRedirect oldVersion="1.0.0.0-2.0.0.0" newVersion="3.0.0.0" />
      </dependentAssembly>
    </assemblyBinding>
  </runtime>
  <elmah>
    <errorLog type="Elmah.MemoryErrorLog, Elmah" />
    <errorPost targetUrl="http://localhost:3154/posterror" sourceId="http://localhost:3154/elmah" />
  </elmah>
</configuration>

Answer 1

很难说出错是什么，但基本上确实如此，如果您尝试设置新的MVC 3网络应用并使其作为仪表板工作，您可能需要调整路由。一般情况下，我建议您从原始仪表板源代码开始，这是一个简单的简单网站，根本没有控制器。您可以直接from the source code或downloading the sample zipped application执行此操作。当然可以从MVC新的网络应用程序制作一个仪表板，但正如你所说，你需要进行一些调整，并且没有太多需要这样做，因为ElmahR仪表板并不真正需要一个控制器（幕后的一切都是通过SignalR发生的））。作为一个开源项目，您可以随意破解它，但如果您不想这样，我建议您从压缩应用程序的示例仪表板开始，按照说明进行配置并对其进行个性化

使用asp.net MVC进行ElmahR配置

1 个答案: