我正在尝试使用此c代码连续运行两个可执行文件：
#include <stdio.h>
#include <unistd.h>
int main (int argc, char *argv[])
{
fork();
execv("./prcs1", &argv[1]); // GIVE ADDRESS OF 2nd element as starting point to skip source.txt
fork();
execv("./prcs2", argv);
printf("EXECV Failed\n");
}
程序在第一次execv（）调用之后退出，尽管有fork，它永远不会到达第二个execv（）。我试过在第一个分叉后调用wait（），但我不确定它是什么缺少的。
在孩子退出后，为什么控制不会返回父母的任何想法？
答案 0 :(得分：16)
你有几个问题。首先，如果您只想运行两个程序，则只需要调用fork()一次。然后在父进程中运行一个程序，在子进程中运行一个程序。其次，您正在构建要错误传递给argv的{{1}}数组。第一个条目应该是可执行文件名。做类似的事情：
execv请注意，此示例不会进行错误检查。
答案 1 :(得分：16)
您需要了解fork和execv如何协同工作。
你需要stdlib退出（如果execv失败），并且errno，打印原因，
//I'm trying to run two executables consecutively using this c code:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
您可能想要检查您的孩子退出的原因（核心转储，信号，正常退出），因此我添加了此功能，
#include <sys/types.h>
#include <sys/wait.h>
//WIFEXITED(status) returns true if the child terminated normally, that is, by calling exit(3) or _exit(2), or by returning from main().
//WEXITSTATUS(status) returns the exit status of the child. This consists of the least significant 8 bits of the status argument that the child specified in a call to exit(3) or _exit(2) or as the argument for a return statement in main(). This macro should only be employed if WIFEXITED returned true.
//WIFSIGNALED(status) returns true if the child process was terminated by a signal.
//WTERMSIG(status) returns the number of the signal that caused the child process to terminate. This macro should only be employed if WIFSIGNALED returned true.
//WCOREDUMP(status) returns true if the child produced a core dump. This macro should only be employed if WIFSIGNALED returned true. This macro is not specified in POSIX.1-2001 and is not available on some UNIX implementations (e.g., AIX, SunOS). Only use this enclosed in #ifdef WCOREDUMP ... #endif.
//WIFSTOPPED(status) returns true if the child process was stopped by delivery of a signal; this is only possible if the call was done using WUNTRACED or when the child is being traced (see ptrace(2)).
//WSTOPSIG(status) returns the number of the signal which caused the child to stop. This macro should only be employed if WIFSTOPPED returned true.
//WIFCONTINUED(status) (since Linux 2.6.10) returns true if the child process was resumed by delivery of SIGCONT.
int
exitreason(pid_t cid, int status)
{
if( WIFEXITED(status) )
{
printf("child %d terminated normally, that is, by calling exit(3) or _exit(2), or by returning from main().\n",cid);
if( WEXITSTATUS(status) )
{
printf("child %d exit status %d. This consists of the least significant 8 bits of the status argument that the child specified in a call to exit(3) or _exit(2) or as the argument for a return statement in main().\n",cid,WEXITSTATUS(status));
}
}
if( WIFSIGNALED(status) )
{
printf("child %d process was terminated by a signal.\n",cid);
if( WTERMSIG(status) )
{
printf("child %d signal %d that caused the child process to terminate.\n",cid,WTERMSIG(status));
}
if( WCOREDUMP(status) )
{
printf("child %d produced a core dump. WCOREDUMP() is not specified in POSIX.1-2001 and is not available on some UNIX implementations (e.g., AIX, SunOS). Only use this enclosed in #ifdef WCOREDUMP ... #endif.\n",cid);
}
}
if( WIFSTOPPED(status) )
{
printf("child %d process was stopped by delivery of a signal; this is only possible if the call was done using WUNTRACED or when the child is being traced (see ptrace(2)).\n",cid);
if( WSTOPSIG(status) )
{
printf("child %d number of the signal which caused the child to stop.\n",cid);
}
}
if( WIFCONTINUED(status) )
{
printf("child %d process was resumed by delivery of SIGCONT.\n");
}
}
这是你的程序注释用注释解释父代表处理的代码部分，以及孩子（ren）处理的代码部分。
int main (int argc, char *argv[])
{
char proc1[] = "/bin/echo"; //"./prcs1";
char proc2[] = "/bin/echo"; //"./prcs2";
pid_t cid1, cid2, cidX;
int status=0;
int waitoptions = 0;
//WNOHANG return immediately if no child has exited.
//WUNTRACED also return if a child has stopped (but not traced via ptrace(2)). Status for traced children which have stopped is provided even if this option is not specified.
//WCONTINUED also return if a stopped child has been resumed by delivery of SIGCONT.
int res;
if( (cid1 = fork()) == 0 ) //child1
{
printf("in child1\n");
if( (res = execv(proc1, &argv[1])) < 0 ) // GIVE ADDRESS OF 2nd element as starting point to skip source.txt
{
printf("error: child1: %d exec failed %d\n", cid1, errno);
printf("error: cannot execv %s\n",proc1);
exit(91); //must exit child
}
}
else if( cid1 > 0 ) //cid>0, parent, waitfor child
{
cidX = waitpid(cid1, &status, waitoptions);
printf("child1: %d res %d\n", cid1, res);
exitreason(cid1, status);
}
else //cid1 < 0, error
{
printf("error: child1 fork failed\n");
}
if( (cid2 = fork()) == 0 ) //child2
{
printf("in child2\n");
if( (res = execv(proc2, &argv[1])) < 0 ) // GIVE ADDRESS OF 2nd element as starting point to skip source.txt
{
printf("error: child2: %d exec failed %d\n", cid2, errno);
printf("error: cannot execv %s\n",proc2);
exit(92); //must exit child
}
}
else if( cid2 > 0 ) //cid>0, parent, waitfor child
{
cidX = waitpid(cid2, &status, waitoptions);
printf("child2: %d res %d\n", cid2, res);
exitreason(cid2, status);
}
else //cid2 < 0, error
{
printf("error: child2 fork failed\n");
}
}
答案 2 :(得分：4)
我猜你没有太多阅读fork（）。
当你调用fork()时，它会创建一个子进程，它将从fork运行相同的代码。
fork()会返回三种值
您的代码应如下所示。
#include <stdio.h>
#include <unistd.h>
int main (int argc, char *argv[])
{
int ret = fork();
if(ret==0)
{
//child process
execv("./prcs1", &argv[1]); // GIVE ADDRESS OF 2nd element as starting point to skip source.txt
printf("EXECV Failed from child\n");
}
else if(ret>0)
{
//parent process
execv("./prcs2", argv);
printf("EXECV Failed from parent\n");
}
else
{
//you will come here only if fork() fails.
printf("forkFailed\n");
}
return 0;
}
答案 3 :(得分：3)
只有在呼叫失败时，exec系列才会返回。
由于你没有检查fork的返回值，你将在父进程和子进程中调用execv。
检查返回值：如果它是0，则表示您在子进程中，如果它大于零，则表示您在父进程中。低于零表示分叉失败。