我正在尝试从连接到系统USB端口的USB设备(例如pendrive)获取数据。在这里,我可以打开设备文件并读取一些随机原始数据。但我想获取像minicom / teraterm这样的数据。
请让我知道我可以使用哪些方法和库来成功完成,以及如何完成。
#include <stdio.h>
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <termios.h>
#include <signal.h>
#include <sys/time.h>
int main()
{
short portfd=-1;
int n,f,len;
char buf[256],*s;
alarm(2);
#if defined(O_NDELAY) && defined(F_SETFL)
portfd = open("/dev/ttyUSB0", O_RDWR|O_NDELAY);
if (portfd >= 0){
/* Cancel the O_NDELAY flag. */
printf("port openend\n");
n = fcntl(portfd, F_GETFL, 0);
(void) fcntl(portfd, F_SETFL, n & ~O_NDELAY);
}
#else
portfd = open("/dev/ttyUSB0", O_RDWR);
#endif
if (portfd >= 0)
{
if (len == 0) len = strlen(s);
for(f = 0; f < len && f <100; f++)
buf[f] = *s++ | 0x80;
write(portfd, buf, f);
printf("Do write\n");
while(portfd>=0){
printf("%s\n",buf);
}
}
alarm(0);
signal(SIGALRM, SIG_IGN);
if (portfd < 0) {
printf("cannot open %s. Sorry.\n", "/dev/ttyUSB0");
}
}
输出记录:
���������鉀�������������������鍀���������������������������������������������������������������2
����������鉀�������������������鍀���������������������������������������������������������������2
答案 0 :(得分:3)
您需要设置正确的端口配置...
struct termios oldtio,newtio;
// open port...
// save existing attributes
tcgetattr(fd,&oldtio);
// set attributes - these flags may change for your device
#define BAUDRATE B9600
memset(&newtio, 0x00, sizeof(newtio));
newtio.c_cflag = BAUDRATE | CRTSCTS | CS8 | CLOCAL | CREAD;
newtio.c_iflag = IGNPAR | ICRNL;
newtio.c_oflag = 0;
tcflush(fd, TCIFLUSH);
tcsetattr(fd,TCSANOW,&newtio);
//reset attributes
tcsetattr(fd,TCSANOW,&oldtio);
我在这里有一个粗略的工作示例...... http://file-hub.com/cmd:thread/142300
答案 1 :(得分:1)
您在控制台中获得的垃圾可能是由于串行线路速度配置不正确造成的。我建议你这样做,以确保你的设备设置正确。