Question

我已经创建了一个算法，用于将整数最大为255字节的整数除以8位整数，并且它可以用于我已经完成的测试。有没有人对此有任何意见或任何改进建议？有没有更好的算法用于此目的？我不希望bignum通过bignum除法算法，第二个整数是8位整数。

目前为止的最佳解决方案（小端）：

typedef struct{
    u_int8_t * data;
    u_int8_t length;
}CBBigInt;
void CBBigIntEqualsDivisionByUInt8(CBBigInt * a,u_int8_t b,u_int8_t * ans){
    // base-256 long division.
    u_int16_t temp = 0;
    for (u_int8_t x = a->length-1;; x--) {
        temp <<= 8;
        temp |= a->data[x];
        ans[x] = temp / b;
        temp -= ans[x] * b;
        if (!x)
            break;
    }
    a->length -= ans[a->length-1]? 0 : 1; // If last byte is zero, adjust length.
    memmove(a->data, ans, a->length); // Done calculation. Move ans to "a".
}

带有大端的旧解决方案：

它的工作原理是：

如果除数是2的幂，请向右移一点。
否则计算除数在大于被除数之前需要向左移动多少，并使16位整数成为除数，就好像它被移到左边一样。这将用于减法。
在答案上设置与移位量对应的位。所做的是股息可以适用于除数的数量，最多可达到2的幂。
从被除数中取走移位的字节以创建余数。
从步骤2开始重复余数，直到除数大于余数。当发生这种情况时，就会找到答案。

typedef struct{
    u_int8_t * data;
    u_int8_t length;
}CBBigInt;
u_int8_t CBPowerOf2Log2(u_int8_t a){
    switch (a) {
        case 1:
            return 0;
        case 2:
            return 1;
        case 4:
            return 2;
        case 8:
            return 3;
        case 16:
            return 4;
        case 32:
            return 5;
        case 64:
            return 6;
    }
    return 7;
}
u_int8_t CBFloorLog2(u_int8_t a){
    if (a < 16){
        if (a < 4) {
            if (a == 1){
                return 0;
            }
            return 1;
        }
        if (a < 8){
            return 2;
        }
        return 3;
    }
    if (a < 64){
        if (a < 32) {
            return 4;
        }
        return 5;
    }
    if (a < 128){
        return 6;
    }
    return 7;
}
void CBBigIntEqualsRightShiftByUInt8(CBBigInt * a,u_int8_t b){
    u_int8_t deadBytes = b / 8; // These bytes fall off the side.
    a->length -= deadBytes; // Reduce length of bignum by the removed bytes
    u_int8_t remainderShift = b % 8;
    if (!remainderShift) { // No more work
        return;
    }
    u_int16_t splitter;
    u_int8_t toRight = 0; // Bits taken from the left to the next byte.
    for (u_int8_t x = 0; x < a->length; x++) {
        splitter = a->data[x] << 8 - remainderShift; // Splits data in splitters between first and second byte.
        a->data[x] = splitter >> 8; // First byte in splitter is the new data.
        a->data[x] |= toRight; // Take the bits from the left
        toRight = splitter; // Second byte is the data going to the right from this byte.
    }
}
void CBBigIntEqualsDivisionByUInt8(CBBigInt * a,u_int8_t b,u_int8_t * ans){
    if (!(b & (b - 1))){
        // For powers of two, division can be done through bit shifts.
        CBBigIntEqualsRightShiftByUInt8(a,CBPowerOf2Log2(b));
        return;
    }
    // Determine how many times b will fit into a as a power of two and repeat for the remainders
    u_int8_t begin = 0; // Begining of CBBigInt in calculations
    bool continuing = true;
    u_int8_t leftMost;
    bool first = true;
    while (continuing){
        // How much does b have to be shifted by before it becomes larger than a? Complete the shift into a shiftedByte
        int16_t shiftAmount;
        u_int16_t shiftedByte;
        if (a->data[begin] > b){
            shiftAmount = CBFloorLog2(a->data[begin]/b);
            shiftedByte = b << 8 + shiftAmount;
        }else if (a->data[begin] < b){
            shiftAmount = -CBFloorLog2(b/a->data[begin]);
            shiftedByte = b << 8 + shiftAmount;
            // Shift right once again if "shiftedByte > (a->data[begin] << 8) + a->data[begin+1]" as the shifted divisor should be smaller
            if (shiftedByte > ((a->data[begin] << 8) + a->data[begin+1])){
                shiftedByte >>= 1;
                shiftAmount--; // Do not forget about changing "shiftAmount" for calculations
            }
        }else{
            shiftAmount = 0;
            shiftedByte = b << 8;
        }
        // Set bit on "ans"
        if (shiftAmount < 0){ // If "shiftAmount" is negative then the byte moves right.
            ans[begin+1] |= 1 << (8 + shiftAmount);
            if (first) leftMost = 1;
        }else{
            ans[begin] |= 1 << shiftAmount; // No movement to right byte, jsut shift bit into place.
            if (first) leftMost = 0;
        }
        first = false; // Do not set "leftMost" from here on
        // Take away the shifted byte to give the remainder
        u_int16_t sub = (a->data[begin] << 8) + a->data[begin+1] - shiftedByte;
        a->data[begin] = sub >> 8;
        if (begin != a->length - 1) 
            a->data[begin + 1] = sub; // Move second byte into next data byte if exists.
        // Move along "begin" to byte with more data
        for (u_int8_t x = begin;; x++){
            if (a->data[x]){
                if (x == a->length - 1)
                    // Last byte
                    if (a->data[x] < b){
                        // b can fit no more
                        continuing = false;
                        break;
                    }
                begin = x;
                break;
            }
            if (x == a->length - 1){
                continuing = false; // No more data
                break;
            }
        }
    }
    a->length -= leftMost; // If the first bit was onto the 2nd byte then the length is less one
    memmove(a->data, ans + leftMost, a->length); // Done calculation. Move ans to "a".
}

谢谢！

Answer 1

我将其描述为“基地2长师”。一个更好的选择是“base 256 long division”。

这是一个（未经测试的，可能是错误的）示例：

typedef struct{
    u_int8_t * data;
    u_int8_t length;
} CBBigInt;


u_int8_t CBBigIntEqualsDivisionByUInt8(CBBigInt * a, u_int8_t b, u_int8_t * ans) {
    int i;
    unsigned int temp = 0;

    i = a.length;
    while(i > 0) {
       i--;
       temp <<= 8;
       temp |= a.data[i];
       ans.data[i] = temp / b;
       temp -= ans.data[i] * b;
    }
    return temp;   // Return remainder
}

Bignum除法与无符号8位整数。 C

1 个答案: